• 공학교육연구
• /
• 제23권6호
• /
• pp.33-39
• /
• 2020

This paper analyzes the current state of operation and the effect of introduction of the single accreditation system, which was fully introduced in 2016 by the Accreditation Board of Engineering Education Korea(ABEEK). Because Engineering Education Accreditation are program-based certification, and department operates accreditation programs and non-accreditation programs, if a student under the accreditation program fails to graduate from the accreditation program, he or she must complete the transfer to a non-accreditation program at least one year before graduation. Since 2016, when the single accreditation system was introduced, freshmen of department have allowed non-accreditation graduation only for reasons prescribed separately by the program's regulations or guidelines. In order to identify and reflect the operational status and effectiveness of the single accreditation system in the 2020 accreditation review, ABEEK conducted a complete survey on the current status of graduates in February 2020 among 157 programs at 26 universities receiving the 2020 accreditation review. The results of this study are expected to be used as basic data for the improvement of the single accreditation system in the future by examining the effects of the single accreditation system implemented after 2016 and considering the problems at the site due to the introduction of the single accreditation system of programs that ABEEK had not previously expected.

• 공학교육연구
• /
• 제18권5호
• /
• pp.32-41
• /
• 2015

This paper deals with analyzing accreditation findings and the causes for the deficiencies in the review by the EAC(Engineering Accreditation Committee) of ABEEK in 2014. For this purpose Final Statements of the 266 engineering education programs reviewed by the EAC of ABEEK in 2014 were analyzed on the basis of the each criterion. However, Accreditation Criterion 8(Program Criterion) was excluded in the analysis of the causes for the deficiencies since the program-specific requirements within areas of specialization might vary with the program criteria. As results of accreditation review by the EAC of ABEEK, Deficiency findings were 81 cases which made up 3.81% of total findings, Weakness findings were 1,679 which made up 78.91% of total findings, Concern findings were 124 cases which made up 5.83% of total findings, and Satisfaction findings were 244 cases which made up 11.47% of total findings. Deficiency and Weakness findings against which the relevant program must take actions for the improvement were 82.71% in all. The findings on program accreditation are made on the basis of the Accreditation Actions Guide. Accordingly, in view of formal logic in the accreditation review, the accreditation findings should comply with the Accreditation Actions Guide consistently. In this respect, the Deficiency findings in the accreditation review can be justified. So it is useful for a program or an institution which prepares for the accreditation review to check over the causes for the Deficiency against the Accreditation Actions Guide. On the other hand changeover in the accreditation policy of the ABEEK may be necessary. If the quality of the engineering education is improved continuously through the accreditation review, accreditation fulfills its purpose. To gain this end it is important to place higher value on the 'bigger picture' than on the minor details. In other words, "holistic" evaluation of evidence should form the basis of accreditation review.

• 공학교육연구
• /
• 제19권4호
• /
• pp.24-34
• /
• 2016

There's been few research to study the effects of CAC(Computing Accreditation Committee) evaluation, since start of CAC accreditation 10 years ago. The purpose of this paper is to find what computer engineering graduates perceive the effects of CAC accreditation and to suggest how CAC accreditation process can be improved. The research findings through survey are followings; First, computer engineering graduates' undergraduate education satisfaction is not high enough(3.28). Second, the computer engineering graduates don't recognize CAC accreditation necessary. Third, graduates who work in company chose design courses as the most helpful, while graduates who study in graduate school pursuing further career in master or doctor program chose major subjects. Lastly, graduates from accredited program do not think their completion of accreditation program influence their employment. Strategic approaches to make higher effectiveness of CAC accreditation system are suggested. First, improvement of curriculum and instruction method in CAC accredited program is required to satisfy the needs of students and industry. Second, efforts to inform students of understandings and necessity of accreditation are highly recommended. Third, industrial sector needs to understand CAC accreditation and give graduates from accredited program more incentives. Lastly, government support like Seoul Accord Activation Project should last for a while.

• 공학교육연구
• /
• 제20권1호
• /
• pp.28-44
• /
• 2017

This paper deals with analyzing accreditation findings and the causes for the Weakness in the review by the EAC(Engineering Accreditation Committee) of ABEEK in 2015. As results of accreditation review by the EAC and CAC of ABEEK, Weakness findings were 697 cases which made up 56.94% of total findings. Deficiency and Weakness are considered to have been resolved only when the correction or revision has been implemented. The criterion which has the most Weakness findings in the 2015 accreditation review was the criterion 3 Curriculum. By the way the variety and quantity of the Weakness findings are so huge that the analysis of the causes for Weakness findings is focused on the Criterion 3 Curriculum. The findings on program accreditation are made on the basis of the Accreditation Actions Guide. Accordingly in view of formal logic in the accreditation review, the accreditation findings should comply with the Accreditation Actions Guide consistently. In this respect, the Weakness findings in the accreditation review can not be justified. On the other hand changeover in the accreditation policy of the ABEEK may be necessary. If the quality of the engineering education is improved continuously through the accreditation review, accreditation fulfills its purpose.

• 공학교육연구
• /
• 제15권6호
• /
• pp.19-33
• /
• 2012

We analyze the problems of curriculum management and accreditation criteria through data analysis and survey on domestic and foreign curriculums and accreditation criteria, propose an efficient curriculum model based on educational realities and requirements of all university members and suggest improvement direction for more efficient curriculum management and accreditation criteria. For this study, we investigate curriculum data of several domestic and foreign universities, analyze the datum in various aspects and conduct a survey on curriculum management and accreditation criteria for collecting extensive opinion of university members on curriculum management and accreditation criteria. We expect that the proposed curriculum model and improvement direction of curriculum and accreditation criteria will help university members to efficiently manage accreditation programs.

• 공학교육연구
• /
• 제18권3호
• /
• pp.59-68
• /
• 2015

This study was implemented for the purpose of analyzing the effects of Engineering Education Accreditation. Now, 15 years has passed adopting the engineering education system. We need to analyze the effect that this system has changed on the ground of engineering education, and it cultivated the human resource. In order to achieve the purpose of this study, the survey were done on the professors, graduates, and workers. The results and conclusions of this study are summarized as follows: First, it is urgent need to change the system of accreditation, and to get the public trust on assessment. Second, it is necessary to make circumstance that engineering education accreditation is advertised to the industries, and the industry can join the development, consulting, evaluation of curriculum. Third, government needs to make the policy that gives the incentive to the industries, if they give some merits to the accreditation graduates. Fourth, certificate of program graduate is desired to spread the accreditation proliferation. Fifth, government should systemize that accreditation program can get advantage to be selected for the public finance business(e.g. BK, LINC).. It will impact the quality Improvement and accountability of engineering programs.

• Industrial Engineering and Management Systems
• /
• 제13권1호
• /
• pp.67-86
• /
• 2014

The number of students graduating from accredited programs has been increasing annually since the first students graduated from accredited engineering programs in Korean universities in 2004. In this paper, we evaluate the effect of engineering education accreditation by the Accreditation Board for Engineering Education of Korea (ABEEK). We developed performance evaluation indices based on the balanced scorecard concept and applied the proposed indicators to graduates, faculty, and industry employers to see if there are significant differences between accredited and non-accredited groups. Overall, regardless of survey object, engineering education accreditation was perceived to contribute to the elevation of engineering and science and the level of national growth. However, the differences between accredited and non-accredited groups for some key performance indicators were statistically insignificant. The results of this paper are expected to provide crucial feedback information for the improvement of engineering education accreditation in Korea.

• 공학교육연구
• /
• 제7권1호
• /
• pp.51-63
• /
• 2004

우리나라에서 전문대학 공학기술교육의 질을 높이고 여러 문제점을 해결하기 위해서는 전문대학 공학 기술교육 프로그램 인증제 도입의 적극적인 검토가 필요하다. 전문대학 인증제도를 실시하여 시드니 협정의 가입국이 되면 우리나라의 전문대학 공학교육은 국제적인 수준의 교육을 인증 받으면서 졸업생을 국제적으로 인정받을 수 있다. 이를 위해서는 이미 전문대학 공학기술교육 인증제를 실시하거나 시드니 협정의 가입국의 인증제도와 평가준거를 살펴보고 우리나라 교육현실과 산업계의 요구를 반영한 평가준거를 개발하여 전문대학 공학교육 인증을 실시해야 할 것이다. 그리고 우리나라에서 전문대학 공학교육 프로그램 인증제도를 실시하고 정착하기 위해서는 인증의 필요성을 인식하고 산 학 연이 상호 협력하여 우리나라에 적합한 인증제도와 평가준거를 만드는 일이 필요할 것이다.

• 공학교육연구
• /
• 제23권3호
• /
• pp.59-65
• /
• 2020

This paper introduces the association method for the program outcomes of engineering education accreditation and the competency units of National Competency Standards(NCS). This association method can be used to efficiently develop an engineering curriculum that is based on both of the NCS and the engineering education accreditation. The association method consists of an analysis phase, an association phase and a checking phase. We also deals with the curriculum development procedure that uses the proposed association of program outcomes and competency units. Also, we provide the application of this method to the computer engineering program for NCS-based engineering education accreditation. Thus we can systematically and efficiently develop curriculums for the NCS-based engineering education accreditation by using the proposed method.

• 공학교육연구
• /
• 제10권1호
• /
• pp.77-85
• /
• 2007

1999년 한국공학교육인증원이 창립된 이래 2001년 2개 대학의 인증 평가 실시 이후 2005년 현재 전국공과대학의 10%가 인증 평가가 이루어졌다. 인증기준을 만족시키기 위한 공과대학들의 교육적 노력들을 통해 공학교육인증제도가 한국공학교육을 변화시키고 있는 것이 사실이다. 인증을 준비하는 많은 대학들은 공학교육개선을 위한 통합시스템을 개발하였으며 전국의 50개 이상의 공학교육센터들이 만들어졌다. 또한 학생들에 대한 지속적인 상담과 관찰, 포트폴리오 지도, CQI 등을 통해 공학교육이 개선되고 있음은 매우 고무적이다. 그러나 인증을 준비하는 대학들이 공인원의 인증 평가 기준을 만족시키기 위해 최선의 노력을 하고 있지만 지금까지 유지되어 오던 교육시스템을 수정해야 하는 어려움을 겪고 있다. 더욱이 해마다 공인원의 평가기준이 엄격해 지고 있는 현실에서 이를 준비하는 학교들은 각 기준을 만족하는 수준과 주요 요소들에 대해 분명한 가이드라인을 알고 있지 못하다. 따라서 본 연구는 2006년 인증평가를 받은 4개 종합대학의 예비논평서 분석을 통해 공인원의 인증평가 기준의 주요 요소와 수준을 정리하고 이를 통해 인증을 준비하는 대학들이 최소한 준비해야 할 내용들을 제시하며 공인원이 각 대학에 제시해 주어야 할 요소들을 제언하고자 한다.