• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.8 s.99
• /
• pp.797-802
• /
• 2005

In this paper, we design a UHF band RFID tag antenna which is conjugate matched to an impedance of a chip and also mountable on conductive materials. The proposed tag antenna is very compact($50{\times}30{\times}4mm$) with a modified PIFA shape. The proposed tag antenna has an advantage of easy matching to various chip input impedances. The performance of the antenna is evaluated by monitoring RCS in the reader direction. The RCS of the designed tag is $-10.2\;dBm^2$ when the chip is shorted and is $-21\;dBm^2$ when the chip impedance is a complex conjugate of the antenna impedance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1091-1096
• /
• 2009

Some closed-form expressions for circuit parameters are derived based on the equivalent circuits for the resonant MTM-TL(open and short). The lumped series resistance and shunt conductance, which explain radiation effects of a unit cell may be found by |$S_{11}$|(simulated or measured) with open and short terminations, respectively. The EM-simulated results, circuit-simulated results(obtained using extracted circuit parameters) and measurement results are shown to be in good agreement.

• Journal of the Korean Institute of Gas
• /
• v.10 no.4 s.33
• /
• pp.29-33
• /
• 2006

Estimation of process safety is important in the chemical process design. Prediction for flash points of flammable substances used in chemical processes is the one of the methods for estimating process safety. Flash point is the property used to examine the potential for the fire and explosion hazards of flammable substances. In this paper, multivariate statistical analysis methods(partial least squares(PLS) quadratic partial least squares(QPLS)) using experimental data is suggested for predicting flash points of flammable substances of binary systems. The prediction results are compared with the values calculated by laws of Raoult and Van Laar equation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.997-1002
• /
• 2009

This Letter presents a wideband ENG(Epsilon Negative) ZOR(Zeroth-Order Resonant) antenna designed on a microstrip line. It has a mushroom structure and its size is only $7.65{\times}1.31{\times}2.37\;mm$(or $0.306{\times}0.053{\times}0.095\;{\lambda}_0$ at 12 GHz) owing to zeroth-order resonance. The design procedures with closed form solutions are provided using transmission line theory considering radiation loss. The measured antenna bandwidth is about 20.0 % at 9.2 GHz and antenna gain is 7.1 dBi despite the compact size.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.875-880
• /
• 2011

We design and analyze the cloaking circuit using 2D transmission line structure to make up for the weakness of the established cloaking circuit using only lumped inductor and capacitor elements. The 2D transmission line structure enables one to conveniently design the cloaking circuit with available element values. All the necessary analysis and synthesis(design) formulas have been derived. A cloaking circuit for a cylindrical scatterer in free space has been designed based on the provided design formulas and its effects have been investigated using the circuit simulator ADS. The effect of the cloaking medium for this specific case has been observed to be about 10.5 dB.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.336-342
• /
• 2005

The DC motor of a vehicle may cause noise and vibration due to high-speed revolution, which can make a driver feel uncomfortable. There have been various studies attempting to solve these problems, mostly focusing on the causes of noise and vibration and a means of preventing them. The CAE methodology is more efficient than a real test for the purpose of looking for various design parameters to reduce the noise and vibration of the DC motor. In this study, a design process for reducing brush noise is presented with the use of a computer model, which is made by using a multi-body dynamics program (DADS). The design parameters to reduce the brush noise and vibration were proposed using a computer model. They were used to reduce the noise and vibration of the DC motor and verified by the test results of the fan DC motor in the vehicle. This method may be applicable to various DC motors.

• Journal of Applied Biological Chemistry
• /
• v.43 no.4
• /
• pp.246-249
• /
• 2000

We investigated the production of chitin oligosaccharides using food grade papain. A solution of commercial food grade papain (FGP) was dialyzed for 12 h before measuring its chitinolytic activity. The effects of enzyme concentration, reaction temperature, and pH on the endochitinase and $\beta$-N-acetylglucosaminidase activities and the thermostability of these enzymes were investigated. In adddition, the reaction products were analyzed with gel filtration on a Bio-Gel P2. The endochitinase activity was twentyfold higher than that of $\beta$-N-acetylglucosaminidase. The optimal endochitinase activity was at pH 3.0, while the maximal $\beta$-N-acetylglucosaminidase activity was at pH 6.0. The reaction product consisted mainly of the dimer of N -acetylglucosamine, with a small amount of its trimer. Under the experimental conditions, $120{\mu}g$ of chitin oligomers were obtained with 1 mg of FGP protein after an incubation of 2 h.

• Journal of the Korean Society of Systems Engineering
• /
• v.2 no.2
• /
• pp.5-10
• /
• 2006

It was difficult that each enterprise clearly defines PDM in domestic vehicle manufacturing industry and decides investment for the successful foundation in the mid-90s. Also, it was true that most investments to success repeat a process of trial and error even if they decide and propel. Now, PDM is not a luxurious system. Because the company is operated well even if it manages business manually, the company may not be interested in PDM introduction. Problem is business efficiency and product competitiveness. Now, we must consider that introduction and drive of PDM became necessary as instrumentation for Re-Engineering of business process concerning innovative dimension restructuring that is not reorganization, development and improvement of business for enterprise's survival. This indicates that now is when level of infra construction for an IT technology dominates competitiveness of business management. Enterprise can expect effects of PDM by implementation that manages Intellectual Properties through administration of knowledge and information finally.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1073-1078
• /
• 2012

This paper presented the extraction solution for the coupling coefficient at the magnetically coupled wireless power transmission(WPT) system through the analysis of its equivalent circuit considering the loss. The conventional extraction solution using coupled mode theory is generalized employing the extracted solution considering the load resistance. Consequently, the measuring process of extracting coupling coefficient becomes convenient since the even/odd mode analysis is not necessary. Furthermore, the coupling coefficient obtained from the induced extraction method was in excellent agreement with the coupling coefficient obtained using the ratio of magnetic flux passing through the two loops. The extraction of the accurate coupling coefficient at the magnetically coupled WPT is an essential work to analyze and optimize the WPT system.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2346-2352
• /
• 2020

Dual-energy x-ray absorptiometry (DXA) is the noninvasive method to diagnose osteoporosis disease characterized by low bone mass and deterioration of bone tissue. Many global companies and research groups have developed the various DXA detectors using a direct photon-counting detector such as a cadmium zinc telluride (CZT) sensor. However, this approach using CZT sensor has some drawback such as the limitation of scalability by high cost and the loss of efficiency due to the requirement of a thin detector. In this study, a SiPM based DXA system was developed and its performance evaluated experimentally. The DXA detector was composed of a SiPM sensor coupled with a single LYSO scintillation crystal (3 × 3 × 2 ㎣). The prototype DXA detector was mounted on the dedicated front-end circuit consisting of a voltage-sensitive preamplifier, pulse shaping amplifier and constant fraction discriminator (CFD) circuit. The SiPM based DXA detector showed the 34% (at 59 keV) energy resolution with good BMD accuracy. The proposed SiPM based DXA detector showed the performance comparable to the conventional DXA detector based on CZT.