• 대한기계학회논문집
• /
• 제10권3호
• /
• pp.305-315
• /
• 1986

본 연구에서는 가변 기통 엔진의 동특성을 규명하기 위해 세곳으로 지지되는 직렬 4기통 디이젤 엔진에 대한 3자유도 모델을 설정하였고, 이 모델에서 각 마운트의 위치와 경사각 및 방진고무의 크기를 변경시킬 때의 최적화 문제를 컴퓨터 시뮬레이션 으로 고찰하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2001년도 제16회 학술발표회 논문초록집
• /
• pp.17-20
• /
• 2001

본 연구에서는 KSR-III 액체 로켓엔진의 연소특성을 수치적인 방법으로 성능의 예측과 음향불안정성에 대해 해석하였으며 성능 예측에서는 여러 가지 시험조건에서 시험결과와 계산결과를 비교ㆍ검토하였다. 또한 음향불안정성은 KSR-III 액체 로켓에서 대체로 안정한 결과를 보여 주었으나 일부의 탈설계조건에서 압력섭동에 의해 불안정성이 야기될 수 있는 결과를 보였다. 이러한 결과들은 현재의 시험결과와 공학적인 오차범위 내에서 일치하는 경향을 보이고 있으므로 수치적 계산으로 성능 및 음향불안정을 효과적으로 예측할 수 있을 것으로 판단된다.

• 한국소음진동공학회논문집
• /
• 제24권2호
• /
• pp.102-107
• /
• 2014

The engine excitation forces are considered as major vibration source for the forklift truck, especially in small class. Even though the current engine mounting system designs are acceptable for vibration isolation, the performance of the engine mounting system is still required for the tendency of light weight, higher power and driver's higher vibration requirement. In this paper vibration reduction technique of forklift engine which is supported on rubber mounts is presented. Based on the dynamic model of resilient engine mounting system, design evaluation program is established. The design optimization technique and evaluation method of system properties are discussed. Effects of optimal design are validated through comparison with test results.

• 항공우주시스템공학회지
• /
• 제6권2호
• /
• pp.35-41
• /
• 2012

A reciprocating engine installed on a normal category airplane shall be effectively cooled by air flown through the engine compartment. A airplane powerplant designer has to design cooling air inlets, baffles, seals, and outlets to maintain cylinder head temperatures and oil temperature under the limits, and show compliance with appropriate airworthiness standard. In this study, cooling designs of the installed engine and compliance requirements applicable to the cooling designs were reviewed, and engine cooling flight test results were evaluated for design changes. Engine cooling certification test will be conducted in a next step.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.787-791
• /
• 2013

The engine excitation forces are considered as major vibration source for the forklift truck, especially in small class. Even though the current engine mounting system designs are acceptable for vibration isolation, the performance of the engine mounting system is still required for the tendency of light weight, higher power and driver's higher vibration requirement. In this paper vibration reduction technique of forklift engine which is supported on rubber mounts is presented. Based on the dynamic model of resilient engine mounting system, design evaluation program is established. The design optimization technique and evaluation method of system properties are discussed. Effects of optimal design are validated through comparison with test results.

• 한국소음진동공학회논문집
• /
• 제20권3호
• /
• pp.235-241
• /
• 2010

Engine Mount plays an important role which supports engine, isolates vibration from engine and blocks the vibration from road. Development of engine mount for NVH costs great a deal. So, the cost of development being reduced, the way developed effectively engine mount using DFSS technique is proposed in this paper. CTQ(critical to quality) is vibration and parameter is dynamic stiffness of mounts. The core parameters are selected with TPA(transfer path analysis) technique. It uses design of experiments(DOE) or Taguchi Methods to optimize parameter values and reduce variation. And then, this paper shows the result of improvement for vibration in the developing vehicle.

• 한국유체기계학회 논문집
• /
• 제15권5호
• /
• pp.27-31
• /
• 2012

Turbine inlet temperature is steadily increasing to achieve high specific thrust and efficiency of gas turbine engines. Turbine cooling technology is essential to increase turbine inlet temperature. For this study, a small or medium sized aircraft engine of 10,000 lbf class with the turbine inlet temperature of $1,400^{\circ}C$, the engine overall pressure ratio of 32.2, and the bypass ratio of 5 was set as the baseline model and its performance analysis was performed at the design point. The engine has the performance of 10,013 lbf thrust and the specific fuel consumption of 0.362 lbm/hr/lbf. The thrust and the specific fuel consumption of the baseline model were compared with those of similar class engines. Based on these results, the turbine design requirements were assigned. In addition, the parametric analysis of the engine, related to aerodynamic and cooling design of the high pressure turbine, was performed. Based on the baseline model engine, the influence of turbine inlet temperature, cooling flow ratio, and high pressure turbine efficiency variations on the engine performance was analyzed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.829-832
• /
• 2010

가스터빈엔진의 시동을 위해서는 점화가 가능한 공기 및 연료 조건이 되도록 외부 동력으로 엔진을 가속시켜 주어야 한다. 항공기용 소형 가스터빈엔진의 전기식 시동시스템은 구조가 간단하고 중량이 작아 소형 항공기에 주로 사용된다. 가스터빈 엔진의 전기 시동시스템 해석을 위해서는 배터리, 시동 모터 특성 및 엔진 drag 토크의 분석이 필요하며, 엔진의 사용 온도에 따라 각각의 특성을 반영하여 시동 시스템을 분석하여야 한다. 본 논문에서는 소형 가스터빈엔진의 전기시동 시스템 기본설계 과정 및 주요한 설계 파라메터에 대하여 기술하였다.

• 항공우주기술
• /
• 제12권1호
• /
• pp.111-119
• /
• 2013

로켓 기반 복합사이클 (RBCC) 엔진의 열역학적 사이클 해석을 통해 엔진의 개념 설계를 수행하였다. 설계 엔진은 지상, 정지 상태에서 출발하여 고도 30 km, 마하 8에 도달하는 것을 목적으로 한다. 본 엔진은 정지-마하 3까지는 이젝터 제트 모드, 마하 3-6 영역에서는 램제트 엔진 모드, 마하 6 이상의 영역에서는 스크램제트 모드로 구동한다. 개념설계 결과 본 엔진은 직경 1 m, 길이 6.7 m의 크기를 갖고 최대 추력 약 16.5 ton을 발생시킬 것으로 예측되었다. 램제트, 스크램제트 엔진모드의 경우 엔진 흡입구 설계점에 따라 전압력회복율 및 포획면적비가 달라지므로, 비행마하수에 따른 엔진의 추력성능 변화가 두드러지게 나타났다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.517-524
• /
• 2005

An aerodynamic design for centrifugal compressor which was applied to medium speed diesel engine has done. First of all, exact compressor specifications must be defined by accurate engine system matching. This matching program has been developed. Using the mean1ine prediction method, geometric design and performance curve for compressor was done and verified by comparing three dimensional viscous CFD results. The deviation at the design point was about 2.3%. Combustor has been designed and manufactured for the performance test of medium speed diesel engine turbocharger. Fuel nozzle of combustor was designed and performed by PIV and PDPA test equipment. Through these results, spray characteristics were studied and flow coefficient equation was deduced.