• Journal of Power Electronics
• /
• v.15 no.5
• /
• pp.1207-1216
• /
• 2015

In order to suppress the low frequency oscillation of the neutral-point voltage for three-level inverters, this paper proposes a new discontinuous pulse width modulation (DPWM) control method. The conventional sinusoidal pulse width modulation (SPWM) control has no effect on balancing the neutral-point voltage. Based on the basic control principle of DPWM, the relationship between the reference space voltage vector and the neutral-point current is analyzed. The proposed method suppresses the low frequency oscillation of the neutral-point voltage by keeping the switches of a certain phase no switching in one carrier cycle. So the operating time of the positive and negative small vectors is equal. Comparing with the conventional SPWM control method, the proposed DPWM control method suppresses the low frequency oscillation of the neutral-point voltage, decreases the output waveform harmonics, and increases both the output waveform quality and the system efficiency. An experiment has been realized by a neutral-point clamped (NPC) three-level inverter prototype based on STM32F407-CPLD. The experimental results verify the correctness of the theoretical analysis and the effectiveness of the proposed DPWM method.

• Journal of Information Technology Applications and Management
• /
• v.12 no.4
• /
• pp.93-104
• /
• 2005

Recently, RFID/USN is one of fundamental technologies in information and communications networks. Low-Rate WPAN, IEEE802.15.4 is a low-cost communication network that allows wireless connectivity in applications with limited Power and relaxed throughput requirements. Its applications are building automation, personal healthcare, industrial control, consumer electronics, and so on. Some applications require location information. Of course location awareness is useful to improve usability of data Low-Rate WPAN Is regarded as a key specification of the sensor network with the characteristics of wireless communication, computing, energy scavenging, self-networking, and etc. Unfortunately ZigBee alliance propose a lot of applications based on location aware technologies, but the specification and low-rate WPAN devices don't support anything about location-based services. RSSI ( Received Signal Strength indication) is for energy detection to associate, channel selection, and etc. RSSI is used to find the location of a potable device in WLAN. In this paper we studied indoor location awareness using vector matching of RSSI in low-Rate wireless PAN. We analyzed the characteristics of RSSI according to distance and experimented location awareness. We implemented sensor nodes with different shapes and configured the sensor network for the location awareness with 4 fixed nodes and a mobile node. We try to contribute developing location awareness method using RSSI in 3-dimension space.

• Tunnel and Underground Space
• /
• v.10 no.2
• /
• pp.249-256
• /
• 2000

According to the industrial restructuring in the late 1980's, most domestic mines have been shutdown or suspended in operation. The closed underground excavation caverns remain in their abandoned conditions, and they will potentially cause environmental hazards. To evaluate the feasibility of the utilization of the abandoned caverns, the foreign crises were studied. As a result, we proposed several possible examples including underground storage cavern fur food products, underground compressed air energy system(CAES), and underground repository (or incineration plant) of industrial wastes. Among them, the underground waste repositories are most probable to be seen in Korea in the near future. For this, the study in rock engineering aspects should be conducted, which will include the establishment of support system and safety measure of the abandoned underground excavation caverns.

• Tunnel and Underground Space
• /
• v.7 no.2
• /
• pp.91-99
• /
• 1997

To stabilize the energy price, the more storage facilities of energy are required and among the storage methods of LPG and LNG, the method of storage at low temperature under normal confining pressure is considered. It is needed to understand the mechanical and thermal characteristics of rock under temperature variation so that the behaviors of rock can be predicted. In this paper, the variation of the rock charateristics of the Hwangdeung granite and the Boryung sandstone is studied at low temperature. The mechanical characteristics of rock under low temperatures are that as temperature decreased, unaxial compression strength and Young's modulus increased for Hwangdeung granite; strength and Young's modulus in wet condition were greater than those in dry condition. In the case of Boryung sandstone, as temperature decreases unaxial compression strength and Young's modulus increase but decrease below -10$0^{\circ}C$ in dry condition and below -16$0^{\circ}C$ in wet condtion. The mechanical characteristics of rock after cooling to previous temperature and thawing are that uniaxial compression strength and Young's modulus decrease as temperature decreases. Uniaxial compression strength and Young's modulus in wet conditon decrease more than those in dry condition. Brazilian tension strength decreases as temperature decreases.

• Nuclear Engineering and Technology
• /
• v.12 no.2
• /
• pp.99-105
• /
• 1980

The distribution of $^{55}$ Mn and $^{38}$ Cl recoil species following radiative neutron capture in permanganates, chlorates and perchlorates has been investigated by using ion-exchange chromatography method. The whole of the $^{55}$ Mn radioactivity in permanganates appeared in two valence states, the $^{38}$ Cl radioactivity in chlorates in two valence states and also the $^{38}$ Cl radioactivity in perchlorates in three valence states. Recoil energy was calculated. The internal conversion of $^{38}$ Cl isomer transition affects the retention value. The greater the radii of the cation, the higher is the probability of the recoil atom breaking through the secondary cage. In ammonium salt, the ammonium ion behaves as a reducing agent. Crystal structures with their greater free space have shown low retention.

• Journal of Energy Engineering
• /
• v.12 no.1
• /
• pp.29-34
• /
• 2003

Thermo-acoustic waves can be generated in a compressible fluid by rapid heating and cooling near the boundary walls. These phenomena are very important mechanism of heat transfer in the space environment in which natural convection does not exist. In this study, the generation and transmission characteristics of thermo-acoustic waves in an air filled enclosure with rapid wall heating are studied numerically. The governing equations were discretized using control volume method, and were solved using PISO algorithm and second-order upwind scheme. For the stable solution time step were considered as t=1$\times$$10^{-9}$ order, and grids are 50$\times$800. The induced thermo-acoustic wave propagates through the fluid until it decays due to viscous and heat dissipation. The wave showed sharp front shape and decreased with long tail.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.1
• /
• pp.80-86
• /
• 2011

Vertical open display cabinets are widely used in shopping mall, supermarkets, retail stores. Maintaining the temperature of foods in the display cabinet is vitally important to retailers to ensure optimal food quality and safety. The purpose of this study is to reduce the infiltration of air and heat loss from ambient space to display cabinet. The three-dimensional Computational Fluid Dynamics(CFD) simulation is used for the analysis of air flow patterns and temperature distribution in refrigerated display cabinets. Under several operating conditions which vary both the inner and outer jet velocities in the range from 0.3 to 1.1 m/s, simulations were carried out. This paper presents a performance of display cabinets with single jet and double jet. The energy consumption due to thermal entrainment ratio is plotted with varying Re. It was found that the double jet system is better than single jet system in terms of temperature distribution and energy saving.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.181-191
• /
• 2007

This study attempted to analyze the characteristics of interior design of the apartment units of Model-houses in terms of ecological aspects. 9 companies that possessed their model houses among the construction companies in Busan area as of August 2006 were selected. 20 units in the model houses of these companies were visited and analyzed. Through literature review, the guideline for the environmentally-friendly residential design was designed and developed to the checklists. The data collected were analyzed to find out the ecological characteristics of the interior space of apartment units. The findings are the followings. First, energy efficiency was properly considered in terms of natural lighting and natural ventilation. Second, in sustainability, the materials for floors and walls could not be reused even though they were environmentally-friendly. Water system needs more improvement for sustainable development including grey-water and rain recycling system. Third, interior greening should be applied more for better environment both physically and emotionally. It is expected that future housing will be more high-risen and densely-populated apartment spaces. Therefore, an approach to new ecological aspects including an emphasis on interior greening, use of eco-materials and adhesives, water recycling and flexibility of the spatial configuration should be made for the next generation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.36-43
• /
• 2004

The purpose of this paper was development of modified horizontal daylight duct for reflector of light intake, location of outlet diffuser and size as applicable daylighting system for buildings and, verified applicable possibility base on analysis of daylighting performance through full-scale model test. Experimental result showed that ratio of illumination for light duct was measured 0.3∼0.4％ in interior of a room on clear sky. Also, light duct had wide distribution of illumination than duct about 150[cm] and was decided efficient lighting energy saving because of high daylight performance in case of application actual building during daytime.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.442-443
• /
• 2012

This study propose a sea water heat exchanger for floating architectures, which can be used as heat source or heat sink of heat pump. Based on CFD(Computational Fluid Dynamics), experimental mock-up system is made and tested. Some evaluation performances are shown on this paper.