• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.144-150
• /
• 1996

The purpose of this paper is to develop a simulation program to predict resist prifile in electron-beam lithography, where the main issue is proximity effect. The simualtion program composes of monte-carlo simulation, exposure simulation and development simulation. In nonte-carlo simulation, the absorbed energy in the resist is calculated when one electron is incident into resist, using hybrid model on the basis of the rutherford differential scattering cross section and moller theory. In exposure simulation, the absorbed energy in the resist is calculated when electrons are incident in exposure pattern. In the program, the developed profile depending on time is obtained by string model. The 0.2$\mu$m and the 0.3$\mu$m line and space patterns are experimentally delineated and compared to the simulation results to check the relevance of the program.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.1
• /
• pp.73-80
• /
• 2002

This is study of the planning of thermal insulation to prevent heat loss in a basement, is aimed at investigating the heat loss from the basement space and basement structures. The results analyzed in these researches are as follows; To analyze the heat loss from basement structures, this study experimented on the heat flow phenomenon of a non-insulation structure and two insulation structure models. From the result, the interior surface temperature of two insulation structures(B, C, model) showed an equal temperature, but the interior surface temperature of a non-insulation structure (A model) is different from the two models, Therefore, we understand that the insulator constructed in the basement structure makes a role of preventing the heat loss from the basement. In addition, the exterior surface temperature of two insulation structure models showed an equal temperature. Specially, judging from the temperature difference of C model. we understand that the performance of insulator is low under the definite depth of underground. The thermal insulation design should be constructed under the definite depth of underground considering outdoor and building conditions.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.2
• /
• pp.66-72
• /
• 2014

Ground source heat pump system can achieve high efficiency of performance by utilizing annually constant underground temperature to provide heat source for space heating and cooling. Generally, the depth of constant-temperature zone under the ground depends on surface heat flux and soil properties. The deeper the ground heat exchanger is installed, the higher the heat exchange rate can be acquired. However, in order to optimally design the system, it is necessary to consider both the installation cost and the system performance. In this study, performance analysis of ground source heat pump system according to the depth has been conducted through the case study.

• New & Renewable Energy
• /
• v.9 no.1
• /
• pp.51-59
• /
• 2013

Tantalum carbide crystallites which is to be used for $H_2$ fuel cell has been synthesized via a temperature-programmed reduction of $Ta_2O_5$ with pure $CH_4$. The resultant Ta carbide crystallites prepared using two different heating rates and space velocity exhibit the different surface areas. The $O_2$ uptake has a linear relation with surface area, corresponding to an oxygen capacity of $1.36{\times}10^{13}\;O\;cm^{-2}$. Tantalum carbide crystallites are very active for hydrogen production form ammonia decomposition reaction. Tantalum carbides are as much as two orders of magnitude more active than Pt/C catalyst (Engelhard). The highest activity has been observed at a ratio of $C_1/Ta^{{\delta}+}=0.85$, suggesting the presence of electron transfer between metals and carbon in metal carbides.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.1
• /
• pp.21-27
• /
• 2012

We can efficiently collect crops or minerals by operating multi-robot foraging. As foraging spaces become wider, control algorithms demand scalability and reliability. Swarm robotics is a state-of-the-art algorithm on wide foraging spaces due to its advantages, such as self-organization, robustness, and flexibility. However, high initial and operating costs are main barriers in performing multi-robot foraging system. In this paper, we propose a novel method to improve the energy efficiency of the system to reduce operating costs. The idea is to employ a new behavior model regarding role division in concert with the search space division.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.7
• /
• pp.435-439
• /
• 2016

We developed a Ag nanowire patterning technique using a water-soluble sacrificial layer. To form a water-soluble sacrificial layer, germanium was deposited on the substrate and then water-soluble germanium oxide was simply formed by thermal oxidation of germanium using a conventional furnace. The formation of Ag nanowire patterns with various line and space arrangements was successfully demonstrated using this patterning process. The main advantage of this patterning technique is that it does not use a strong acid etchant, thereby preventing damage to the Ag nanowire during the patterning process.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.248-251
• /
• 2014

We develop the signal processing method for implementing the human perceptual variant on frequency and space. The human visual perceptual sensitivity varies as frequency components and the human perceivable resolution diminishes as the distances further from the eye-focused point. For realizing the frequency sensitivity, we developed the signal direction adaptive multiband energy scaling method to weight the frequency components. The low-pass filtering is designed on the developed energy scaling method for diminishing perceivable resolutions as the deviated distance from the eye-focused point. The developed method not only enhances the frequency components of image signals at the eye-focused region but also smoothes non-perceivable detailed image signals at non-focused regions. The proposed method is verified by the subjective and objective evaluations that it can improve human perceptual visual quality.

• Communications of the Korean Mathematical Society
• /
• v.9 no.2
• /
• pp.355-359
• /
• 1994

It would be interesting to know if energy minimizing harmonic maps between manifolds have symmetric properties when the manifolds under consideration have some. In this paper, we consider among others radial symmetry. A radially symmetric manifold M of dimension m is the one with a point, called a pole, and an O(m) action as an isometric rotation with respect to the pole, or more precisely a radially symmetric manifold M has a coordinate on which the metric is of the form $ds_{M}$$^2$ = d$r^2$ + m(r)$^2$d$\theta^2$ for some function m(r) depending only on r. Of course m(0) = 0, m'(0) = 1, and when m(r) = r, (M, $ds_{ M}$/$^2$) is the Euclidean space $R^2$.(omitted)

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.929-932
• /
• 2003

Recently, energy Problem has become more important thing than that of past years. Therefore, researchers in many countries are trying to find the solution for removing energy Problem. One of all is the power generation with using the photovoltaic system. Because this system has some advantage, like purity and infinity. However, there are some problems to generate electrical power with using photovoltaic system. That problems, taking up a very big space and taking financial worries, come into existence. So it is inevitable to make the visual implement equipment for doing repetition experiment and solving this problems. In this paper, Boost converter are analyzed and simulated to make high power PV virtual implement system as input source instead of using transformer.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.286-293
• /
• 2002

Photovoltaic systems normally use a maximum power point tracking (MPPT) technique to continuously deliver the highest possible power to the load when variations in the insolation and temperature occur. A simple method of tracking the maximum power points (MPPs) and forcing the boost converter system to operate close to these Points is presented through deriving small-signal model and transfer function of boost converter. This paper aims at modeling boost converter including equivalent series resistance of input reservoir capacitor by state-space-averaging method and PWM switch model. In the future, properly designed controller for compensation will be constructed in real system for maximum photovoltaic power tracking control.