• 한국ITS학회 논문지
• /
• 제8권1호
• /
• pp.65-75
• /
• 2009

차량 애드 혹 네트웍 (VANET)은 모바일 애드혹 네트워크의 일종으로써 차량 간의 임시적인 통신을 가능케 한다. VANET의 모바일 노드는 네트웍의 일원으로 참여하면서 에너지와 자원을 사용한다. 몇몇의 노드는 다른 노드와 협력하는 대신에 자신의 이득만을 취하려고 하는 이기성을 가지고 있다. 이러한 이기성을 가진 노드들로 인해 데이터 접근성과 네트웍의 효율성이 감소하게 된다. 이 논문에서는 새로운 기법인 VANET 그룹에서 이기성을 갖고있는 노드를 제거하는 Friendship-VaR을 제안한다. Friendship-VaR은 이기성을 갖고있는 노드를 제거하고 믿을 수 있는 노드들간에 데이터 공유를 가능케 한다. Friendship-VaR는 간단한 데이터 교환을 통해 노드의 이기성 여부를 결정한다. 실험 결과는 제안한 기법이 기존의 기법에 비해 데이터 접근성이 좋아짐을 보여준다.

• 한국통신학회논문지
• /
• 제35권11A호
• /
• pp.1085-1090
• /
• 2010

Ultra wideband (UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geolocation, and other applications. The energy of UWB signal is extremely spread from near DC to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional mobile wireless systems sharing the frequency bands such as Cellular CDMA and Korean PCS. This paper experimentally evaluates the interference from two kinds of UWB sources, namely a direct-sequence spread-spectrum UWB source and an impulse radio UWB source, to a Cellular CDMA and K-PCS digital transmission system. The average frame error rate degradation of each system arc presented. From these experimental results, we show that in all practical cases UWB system can coexist with Cellular CDMA and K-PCS terminal without causing any dangerous interference.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.40.2-40.2
• /
• 2011

A Counter-rotating wind turbine is one of the new concepts that are proposed to increase the performance of a wind turbine. It has two rotors rotating in the same axis, and it is known that its power coefficient can reach to 0.64 in the ideal case. While the BEMT is widely used to analyze the aerodynamic performance of wind turbines, the analysis of the counter-rotating wind turbine by using it is limited due to the aerodynamic interaction between the two rotors. In this study, the vortex lattice method is used to consider the effect of the front rotor on the rear rotor of the counter-rotating wind turbine and calculate the aerodynamic performance of it. The power and thrust sharing in the two rotors of the counter-rotating wind turbine are predicted and the total power and thrust are compared with that of a single rotor. Moreover, the wake convection and expansion rate is also compared with that of a single rotor.

• 국제초고층학회논문집
• /
• 제6권4호
• /
• pp.297-300
• /
• 2017

Employers are realizing that workplaces have an immense impact on productivity. And, because people typically represent about 90% of a company's costs, even a slight improvement in productivity hits the bottom-line in a very big way. The focus is shifting away from saving money by reducing space needs or cutting energy requirements, and moving toward making the workplace friendlier and healthier. What is a healthy workplace, exactly? The answer should be clear by now. Mountains of research have expounded on this very topic, and then news outlets cover the latest discoveres ad infinitum. The problem is, research is rather dense, while the news isn't comprehensive. Office managers trying to improve workplace wellness want neither a 55-page report nor a half dozen articles to convince their landlord that their space can do better. Recognizing this gap, Harvard researchers have released a concise-yet-complete list of healthy building features. Here, we're sharing these nine features with a few insights of our own on the value of being healthy and productive. Find out: ${\bullet}$ What makes a healthy building and why is it so important ${\bullet}$ How to improve the health of your own office ${\bullet}$ What happens for your people and your bottom line when you make health a priority.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.898-904
• /
• 2009

The objective of the present study lies in constructing web-based GIS system providing broad range of information applicable for power/telecommunications distribution facilities through cable. Nowadays, Korea is renowned forits faste sttele communications network across the nation enjoyable for being a test-runbed by worldwide contents providers. It is not too much to say that the trend is caused by the fact that Korea utilizes the cobweb-like power transmission cables applicable for the nationwide telecommunications networking. In particular, the trend has been all the more encouraged by the governmental drive to expedite the telecommunication network by way of the established power transmission facilities deemed as publicutility. Nevertheless, few can deny that the overexcessive competition among telecommunication service providers increasingly gives rise to unauthorized, arbitrary facilitation of distribution devices, which becomes much burden in operating the normal power/telecommunications distribution facilities by a power-generating company. In this regard, the study, to cope with such problems, attempts to develop a web GIS-based information management system compatible with NDIS(New Distribution Information System), a distribution facility management system now under operation by KEPCO, making advantage of GE Energy's SIAS(Smallworld Internet Application) technology. The model provided by this study is expected to get closer into effective operation of distribution facilities along with better sharing of information among conventional telecommunications operators, while getting rid of infringed facilitation cases

• 한국유기농업학회지
• /
• 제16권3호
• /
• pp.239-258
• /
• 2008

This study identifies the spectrum of different forms of sharing labor in farm houses following the increase in the production of organic produce and deals with the gender division of labor and every day life of the farm households. The increased labor burdens of organic farming give more work opportunities to wives, weakening the gender barriers. However, some of the farm households seeking for economic feasibility are strengthening the gender barriers by specialized work divisions, leading to outside order labor of harvest, sorting, and packaging in order to increase efficiency in agricultural management in extreme cases. Even in the alternative distribution system, farm households has become subject to the distribution system as it is shown that coop claimed the segmentation of sorting work. This is because the convenience of the customers goes before the advantages of producers. Jinju, seeking for economic feasibility, has established the springboard for growth by greenhouse through monoculture and specialization and are operating economic growth stably. Farm couples with this condition, where their incomes are relatively high, are attempting to recharge their energy during low seasons. It is expected that this will be a model case of conventionalization of organic farming. Significance of organic farming in this matter is discussed.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.665-675
• /
• 2019

Renewable energy based on photovoltaic systems is beginning to play an important role to supply power to remote areas all over the world. Owing to the lower output voltage of photovoltaic arrays, high gain DC-DC converters with a high efficiency are required in practice. This paper presents a novel interleaved DC-DC boost converter with a high voltage gain, where the input terminal is interlaced in parallel and the output terminal is staggered in series (IPOSB). The IPOSB configuration can reduce input current ripples because two inductors are interlaced in parallel. The double output capacitors are charged in staggered parallel and discharged in series for the load. Therefore, IPOSB can attain a high step-up conversion and a lower output voltage ripple. In addtion, the output voltage can be automatically divided by two capacitors, without the need for extra sharing control methods. At the same time, the voltage stress of the power devices is lowered. The inrush current problem of capacitors is restrained by the inductor when compared with high gain converters with a switching-capacitor structure. The working principle and steady-state characteristics of the converter are analyzed in detail. The correctness of the theoretical analysis is verified by experimental results.

• 한국산업융합학회 논문집
• /
• 제24권4_1호
• /
• pp.387-395
• /
• 2021

Distributed resources such as renewable energy sources and ESS are connected to the low voltage direct current(LVDC) distribution network through the power conversion system(PCS). Control power is required for the operation of the PCS. In general, controller power is supplied from AC power or DC power through switch mode power supply(SMPS). However, the conventional SMPS has a low input voltage, so development and research on high input voltage self-power suitable for LVDC is insufficient. In this paper, to develop Self-Power that can be used for LVDC, the characteristics of the conventional topology are analyzed, and a series-input single-output flyback converter using a flux-sharing transformer for high voltage is designed. The high input voltage Self-Power was designed in the DCM(discontinuous current mode) to reduce the switching loss and solve the problem of current dissipation. In addition, since it operates even at low input voltage, it can be applied to many applications as well as LVDC. The validity of the proposed high input voltage self-power is verified through experiments.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.638-654
• /
• 2023

Holography is generally known as a technology that records and reconstructs 3D images by simultaneously capturing the intensity and phase information of light. Two or more interfering beams and illumination of this interference pattern onto a photosensitive recording medium allow us to control both the intensity and phase of light. Holography has found widespread applications not only in 3D imaging but also in manufacturing. In fact, it has been commonly used in semiconductor manufacturing, where interference light patterns are applied to photolithography, effectively reducing the half-pitch and period of line patterns, and enhancing the resolution of lithography. Moreover, holography can be used for the manufacturing of 3D regular structures (3D photonic crystals), not just surface patterns such as 1D or 2D gratings, and this can be broadly divided into (i) holographic recording and (ii) holographic lithography. In this review, we conceptually contrast two seemingly similar but fundamentally different manufacturing methods: holographic recording and holographic lithography. We comprehensively describe the differences in the manufacturing processes and the resulting structural features, as well as elucidate the distinctions in the diffractive optical properties that can be derived from them. Lastly, we aim to summarize the unique perspectives through which each method can appear distinct, with the intention of sharing information about this field with both experts and non-experts alike.

• International Journal of Computer Science & Network Security
• /
• 제24권6호
• /
• pp.153-160
• /
• 2024

Information technology plays an important role in healthcare. The cloud has several applications in the fields of education, social media and medicine. But the advantage of the cloud for medical reasons is very appropriate, especially given the large volume of data generated by healthcare organizations. As in increasingly health organizations adopting towards electronic health records in the cloud which can be accessed around the world for various health issues regarding references, healthcare educational research and etc. Cloud computing has many advantages, such as "flexibility, cost and energy savings, resource sharing and rapid deployment". However, despite the significant benefits of using the cloud computing for health IT, data security, privacy, reliability, integration and portability are some of the main challenges and obstacles for its implementation. Health data are highly confidential records that should not be made available to unauthorized persons to protect the security of patient information. In this paper, we discuss the privacy and security requirement of EHS as well as privacy and security issues of EHS and also focus on a comprehensive review of the current and existing literature on Electronic health that uses a variety of approaches and procedures to handle security and privacy issues. The strengths and weaknesses of some of these methods were mentioned. The significance of security issues in the cloud computing environment is a challenge.