• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.350-355
• /
• 2009

Air-conditioning system by ocean thermal energy has been developed in the areas of Europe, North America and Japan because there are abundant amount of thermal energy potential in the ocean and permanent free use for the thermal energy using the air-conditioning system. In the case of domestic ocean thermal energy resource, ocean thermal energy potential exists about 27,155Tcal/year and totally 20,285Tcal/year of possible thermal energy use by heat pump, which are reported from the survey of the 7 domestic near shore cities. Present study is aimed to survey the current development status of domestic and overseas air-conditioning system by ocean thermal energy, especially, for the air-conditioning facility technologies using sea water.

• Environmental Engineering Research
• /
• v.25 no.3
• /
• pp.267-273
• /
• 2020

This Hydrokinetic energy system is the process of extracting energy from rivers, canals and others sources to generate small scale electrical energy for decentralized usage. This study investigates the application of Soil and Water Assessment Tool (SWAT) in Geographical Information System (GIS) environment to evaluate the theoretical hydrokinetic energy potentials of selected Rivers (Asa, Awun and Oyun) all in Asa watershed, Kwara state, Nigeria. SWAT was interfaced with an open source GIS system to predict the flow and other hydrological parameters of the sub-basins. The model was calibrated and validated using observed stream flow data. Calibrated flow results were used in conjunction with other parameters to compute the theoretical hydrokinetic energy potentials of the Rivers. Results showed a good correlation between the observed flow and the simulated flow, indicated by ash Sutcliffe Efficiency (NSE) and R² of 0.76 and 0.85, respectively for calibration period, and NSE and R² of 0.70 and 0.74, respectively for the validation period. Also, it was observed that highest potential of 154.82 MW was obtained along River Awun while the lowest potential of 41.63 MW was obtained along River Asa. The energy potentials obtained could be harnessed and deployed to the communities around the watershed for their energy needs.

• Journal of the Korean Ceramic Society
• /
• v.27 no.1
• /
• pp.109-117
• /
• 1990

Magnetite for Water-based ferrofluid was synthesized by air oxidation of aqueous suspension in the pH range 7-12 at $65^{\circ}C$. The optimum condition of magneite formation was delineated by examining various physicochemcial properties such as Fe2+ content, phase characteristics, MHC and $\sigma$max. The point of zero charge of iron oxide powders obtained at various pH conditions were correlated with the oxidation state of Fe in the iron oxide. The magnetite powder prepared at pH 9 ws dispersed using sodium oleate and sodium dodecylbenzenesulfonate (SDBS) as dispersants, and the dispersion characteristics of the magnetite ferrofluid were examined by means of the fraction of solid dispersed, zeta potential data and FT-IR spectrum. A simple calculation on the potential energy of two interacting magnetite particles showed that the dispersion stability was directly correlated with height of the potential energy barrier or the shape of zeta potential.

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.95-104
• /
• 2013

This paper presents a general analytical method for predicting the magnetic fields of different Halbach magnet arrays with or without back iron mounted on slotless permanent magnet (PM) linear machines. By using Fourier decomposition, the magnetization components of four typical Halbach magnet arrays are determined. By applying special synthetic boundary conditions on the PM surfaces, the expressions of their magnetic field distributions are derived based on the magnetic scalar potential (MSP), which are simpler than those based on the magnetic vector potential (MVP). The correctness of the method is validated by finite element analysis. The harmonics of airgap flux density waveforms of these Halbach magnet arrays with or without back iron are also compared and optimized.

• Solar Energy
• /
• v.5 no.2
• /
• pp.3-10
• /
• 1985

This paper is concerned with the characterized method of wind speed distribution for calculation of wind power density of regional group and wind potential in Korea. It is shown that the Rayleigh distribution, K = 2, is not suitable for analyzing wind data in Korea. Simple relationship, K = 0.21 V + 0.84, is derived from Weibull wind distribution by analyzing wind data obtained from 24 meteorological station and is a suitable tool for estimation of wind power density. Application of this result, the domestic ideal and actual wind potential are estimated as $3.16{\times}10^9$ KWH/year and $7.14{\times}$10^8 KWH/year respectively for the case of 10 meter height, $1m^2$ swept area and $0.1{\times}0.1Km^2$ land area. And for the case of 50 meter height, ideal and actual wind potential are increased as $7.56{\times}10^9$ KWH/year and $2.37{\times}10^9$ KWH/year respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.9
• /
• pp.1477-1485
• /
• 2003

The displacement vector field can be represented in terms of a scalar potential ${\phi}$ and a vector potential ${\phi}$. The scalar potential ${\phi}$ is related to dilatational waves and the vector potential ${\phi}$ is related to rotational waves. Using these two complex displacement potentials, the stress and displacement fields for steadily growing interface cracks in dissimilar materials are obtained. The energy release rate for steadily growing interface cracks in dissimilar materials are also obtained. And with photoelastic isochromatic patterns simulated by computer graphics, the stress intensity factors are discussed.

• Environmental and Resource Economics Review
• /
• v.30 no.2
• /
• pp.325-345
• /
• 2021

In this paper, we empirically evaluate the potential performance of energy conversion policy and analyze its effects on power generation sector. We first examine the degree of substitutability between energy inputs by measuring the price elasticities of energy demands and then estimate the changes in CO₂ generation when the proportions of nuclear power plants and renewable power generation are increased. The shadow prices of nuclear power and renewable energy are calculated to compare the potential costs of power generation between the two energy sources. We analyze the impacts of the expansion of nuclear power plants and renewable power generation on power supply price. Nuclear and renewable energy were measured to be complementary to each other. The expansion of nuclear power plants has been more effective in reducing CO₂ emissions than increasing renewable power generation. In most years over 2002 to 2016, the impact of nuclear power expansion on the power supply price was generally higher than that of renewable power generation, with relatively large range of fluctuations.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.11a
• /
• pp.183-184
• /
• 2008

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.519-520
• /
• 2005

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.326.1-326
• /
• 2002