• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.2
• /
• pp.275-284
• /
• 1997

Thermodynamic behavior of a composite system which is composed of two simple thermal subsystems with constant heat capacities is analyzed, and several thermodynamic phenomena are investigated. The changes of the states and the potential work of the composite system are shown as the interaction between the subsystems in the composite system. The potential work is defined as the possible maximum available work from the composite system, and it is a thermodynamic property of the composite system. The decrease of the potential work is the same as the available work output from the composite system in reversible processes. The dissipation of available work is directly connected to the generation of entropy. The concepts of exergy and internal energy can be explained as a special case of the potential work.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.310-313
• /
• 2008

The wind resource potentials of South Korea are estimated as preliminary stage using the national wind map which has been being established by numerical wind simulation and GIS (Geographical Information System) exclusion analysis. The wind resource potentials are classifying into theoretical, geographical, technical and implementation potentials and the calculation results are verified by comparing to other countries' potentials. In GIS exclusion, urban, road, water body, national parks and steep slope area are excluded from onshore geographical potential while water depth and offshore distance from the shoreline are applied s offshore exclusion conditions. To estimate implementation potential, dissemination records of European countries are adopted which is about 1/8 of geographical potential.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.2
• /
• pp.146-155
• /
• 2002

Surface complexation models employ mass law equations to describe the reaction of surface functional groups with ions in the solution and also Gouy-Chapman theory to consider the electrostatic effects in the surface reactions. In current surface complexation models, however, the coulombic factors used are not wholly consistent with the Gouy-Chapman model of the surface. This study was to provide the derivation of the coulombic term usually employed and then a revised coulombic term completely consistent with Gouy-Chapman Theory. The electrical potential energy. zF${\psi}$, in current surface complexation models is not consistent with the Gouy-Chapman theory with the potential gradient close to the charged surface but with the Donnan model with the uniform potential. Even though the new coulombic factor yielded lower surface potential, it provided worse fits for acid-base titration data of the goethite suspensions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1227-1236
• /
• 1993

In conventional thermodynamics, energy is regarded as a physical quantity transferring from one system to another, but in present study, the real energy is regarded as a physical quantity coming out from one interaction and absorbing into another interaction between two systems. To reconstruct thermodynamics with such a point of view, available work is distinguished from half work in conventional work concepts, and a special space named reversible world is proposed in which every process is reversible and the only measurable quantity is available work and just the equality between the intensities of two systems can be verified. As results, thermodynamic laws are arranged into two principles in the reversible world-conservations of energy elements and conservation of available energy. It means the exsistences of state properties corresponding to transferring energy elements and the available work. The former are extensive properties and the later is named potential work which is a property of the composite system and a kind of mathematical distance. The conventional available energy (exergy) and internal energy can be explained as the special cases of potential work, and the conventional first law of thermodynamics can be derived from the principle of the conservation of available energy. With these new concepts, the description of thermodynamic processes is more comprehensive. The second law of thermodynamics is no longer needed in the reversible world.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.72-77
• /
• 2021

The radial distribution of etch rate was analyzed using the ion energy flux model in VHF-CCP. In order to exclude the effects of polymer passivation and F radical depletion on the etching. The experiment was performed in Ar/SF6 plasma with an SF6 molar ratio of 80% of operating pressure 10 and 20 mTorr. The radial distribution of Ar/SF6 plasma was diagnosed with RF compensated Langmuir Probe(cLP) and Retarding Field Energy Analyzer(RFEA). The radial distribution of ion energy flux was calculated with Bohm current times the sheath voltage which is determined by the potential difference between the plasma space potential (measured by cLP) and the surface floating potential (by RFEA). To analyze the etch rate uniformity, Si coupon samples were etched under the same condition. The ion energy flux and the etch rate show a close correlation of more than 0.94 of R² value. It means that the etch rate distribution is explained by the ion energy flux.

• Korean Journal of Materials Research
• /
• v.1 no.2
• /
• pp.86-92
• /
• 1991

A potential energy function comprising a two-body potential term which is modified form Morse potential and a three-body potential term which is modified from Axilrod-Teller potential has been developed for small carbon clusters. The structural changes of small carbon clusters $C_2-C_6$ are qualitatively investigated by employing this potential energy function representing the energies of the small carbon cluster isotopes as a function of the three body intensity factor. It is found that the structure of the small carbon cluster changes from open structure to closed one, from complicated structure to simple one, and from three-dimensional structure to two-or-one dimensional one as the degree of the three-body interaction increases.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.3
• /
• pp.105-112
• /
• 2008

Solar energy, which is one of renewable energy, would be the most useful resources that can be applied to making energy recycling villages without using fossil energy. This study analyzed energy potential on solar energy considering weather condition in three traditional villages and compared with energy consumption surveyed. A photovoltaic system having 3.0kWp capacity of unit module can generate 182.5%, 96.1% and 170.9% of the yearly mean consumption of electric power in Makhyun, Boojang, and Soso, respectively. A flat-plate solar collector having $2.64m^2$ area of unit module can generate warm water of $142{\ell}$/day, $89{\ell}$/day, and $173{\ell}$/day, respectively in three study villages. In Makhyun and Soso, photovoltaic power and warm water produced by solar energy were sufficient to supply required amount of electric power and warm water. However, both electric power and warm water produced by unit solar module were not sufficient in Boojang area, and so it is required to increase the module area by more than 50%. According to the results of this study, the appropriate combination of energy resources can be applied to rural green-village planning if the characteristic of energy potential for each local area is considered.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1788-1793
• /
• 2008

Classical molecular dynamics simulations (MDS) were conducted to simulate nano-sized cluster collisions with a weakly attractive static surface. Energy exchanges associated with the cluster collision and the adhesion probability are discussed. Routes of the energy exchanges and the kinetic energy loss are vastly altered in their mode according to the cluster incident velocity. In the elastic collision regime ($V_0$<0.1), most incident kinetic energy is recovered into the rebounding kinetic energy, but a little loss in the incident kinetic energy causes the cluster adhesion. Dissipated kinetic energy is converted into the rotational energy. In the weakly plastic collision regime (0.1<$V_0$<0.3), the transition from elastic to plastic collision occurs, and a large part of the released potential energy is converted into rebounding translational energy. For strongly plastic collisions ($V_0$>0.3), permanent cluster deformation occurs with extensive collapse of the lattice structure inducing a solid-to-solid phase transition; moreover, most of the cluster kinetic energy is converted into cluster potential and thermal energy.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.4
• /
• pp.1-11
• /
• 2020

The Journal of the Korean Solar Energy Society is the first journal in South Korea that adopts wind energy as one of its subjects. Since 2000, more than 140 papers on wind energy have been published in the journal, which accounts for 8.5% of the total publication. However, in recent years, the number of published papers on wind energy has been decreasing steadily, and a reason for this decline is the significant dependence on a few specific institutions and authors. In this study, wind energy subjects were classified using the frequency analysis of the subject words extracted from the title, keywords, and abstract of wind energy papers using the text mining technique. In addition, the Korea Citation Index was used to perform quantitative level evaluation by subject and institution and to analyze the trends and characteristics of the wind energy field. Therefore, it was identified that in terms of the number of publications and citations, the main subject areas were resource/micrositing and policy/potential.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.62-69
• /
• 2019

Korean shipbuilding companies have taken many efforts for safety over the years by developing Health, Safety & Environment (HSE) Management Systems, Procedures, Training, and studying Programs for prevention of incidents. As a result, the shipbuilding industry has succeeded in reducing overall injury rates. Nevertheless, the industry also noticed that incident rates are still not at zero and more importantly, serious injuries and fatalities are still occurring. One factor that may be attributing to this is the lack of managing potential severity during incident investigations, most incident investigations are implemented based on the actual result. Generally, each shipbuilding company develops their customized incident investigation programs and these are also commonly being focused on actual result. This study aimed to develop a shift in strategy toward safety to classify the criteria of potential severity from any incidents and manage that to prevent any recurrence or causing any serious injuries or fatalities in the shipbuilding industry. Several global energy companies have already developed potential severity management tools and applied them in their incident investigations. In order to verify the necessity of improvement for current systems, a case study and comparative analysis between a domestic shipbuilding company and several global energy companies from foreign countries was implemented and comparison of two incident investigation cases from specific offshore projects was conducted to measure the value of a potential severity system. Also, a checklist was established from the data of fatalities and serious injuries in recent 5 years that occurred in Korea shipbuilding industry and a proposal to verify high potential incidents in the incident investigation process and comparative analysis between the assessment by appling proposed checklist and the assessment from a global energy company by using their own system was implemented. As a measure to prevent any incidents, it is required to focus on potential severity assessment during the incident investigation rather than to only control actual result. Hence, this study aims to propose a realistic plan which enables to improve the existing practices of incident investigation and control in the shipbuilding industry.