• 한국환경과학회지
• /
• 제18권8호
• /
• pp.867-876
• /
• 2009

Although renewable power is regarded a way to active response to climate change, the stability of whole power system could be a serious problem in the future due to its uncertainties such as indispatchableness and intermittency. From this perspective, the peak time impact of stochastic wind power generation is estimated using simulation method up to year 2030 based on the 3rd master plan for the promotion of new and renewable energy on peak time. Result shows that the highest probability of wind power impact on peak time power supply could be up to 4.41% in 2030. The impact of wind power generation on overall power mix is also analyzed up to 2030 using SCM model. The impact seems smaller than expectation, however, the estimated investment cost to make up such lack of power generation in terms of LNG power generation facilities is shown to be a significant burden to existing power companies.

• 자원ㆍ환경경제연구
• /
• 제21권2호
• /
• pp.271-299
• /
• 2012

환경과 경제성장과의 관계는 환경경제학 분야에서 오랜 동안 논란이 되어왔으며, 논란의 핵심은 두 변수간의 내생성(endogeneity)과 생략변수(omitted variables)들에 관한 문제들이다. 본 연구는 논란의 핵심들을 고려하여 우리나라의 1981년~2008년까지의 시계열자료를 바탕으로 $CO_2$ 배출량과 경제성장 간의 인과관계 및 에너지믹스의 영향을 실증적으로 분석하였다. 에너지믹스와 계량경제학 문제들을 고려한 대부분의 모형에서 $CO_2$ 배출량과 경제성장의 관계가 역 U자형이라는 EKC 가설을 확인할 수 있었으며, 에너지믹스가 국내 온실가스 감축에 크게 기여하는 것으로 나타났다. 에너지믹스가 $CO_2$ 배출에 미치는 영향은 원자력에너지가 다른 에너지원에 비해 $CO_2$ 배출량 감축에 가장 큰 기여를 하였으나, 신재생에너지는 $CO_2$ 감축에 거의 기여하지 못한 것으로 분석되었다. 이는 지금까지 국내에서 신재생에너지 비중이 다른 에너지원에 비해 적었기 때문이다. 또한 최종 에너지 소비부문은 $CO_2$ 증가와 수송부문의 연관성이 통계적으로 유의한 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.769-771
• /
• 2005

Interconnection of electric power systems, as an alternative for energy cooperation under regional economic bloc, has been under extensive debate before progressing the restructure in electric power industry and rapidly expanded in many regions after 1990s. Especially, since northeast asia has strong supplementation in resource, load shape, fuel mix etc., electric power system interconnection in this region may bring considerable economic benefits. In this paper, we evaluate economic benefits from CO2 emission abatement and effectiveness on the fuel mix in Korea by the interconnection in northeast asia. For this analysis, we evaluate effects of CO2 emission abatement under various system interconnection scenarios and compare the results of fuel mix in Korean electric power system with and without transacted electricity via interstate electric power system in northeast asia.

• 자원리싸이클링
• /
• 제29권6호
• /
• pp.48-56
• /
• 2020

본 연구에서는 염소 함유 클링커 특성을 분석하기 위해 raw mix 제조 시 CaCl2를 첨가하였으며, 이때 염소 함량을 고농도 조건인 2,000ppm까지 제어하였다. 염소 첨가 raw mix의 소성온도는 1250℃에서 1350℃까지 조정하였으며, 각각의 최대온도에서 10분간 유지하였다. 모듈러스는 LSF-92.0, SM-2.5 및 IM-1.6으로 고정하였으며, 염소 함유 클링커의 소성성은 free-CaO 분석을 통해 확인하였다. 염소 함량 증가에 따라 free-CaO는 감소하였으며, 1350℃-2000ppm의 free-CaO 함량은 1.5%까지 낮아졌다. 염소 함량 증가에 따른 광물특성 확인을 위해 광학현미경 및 XRD를 활용하였다. 1250℃ 소성 시에는 클링커 광물을 관찰할 수 없었으며, 1350℃ 소성 시에는 염소 함량 증가에 따라 alite 크기가 소폭 증가하였다. 또한 염소 함량 증가에 따라 우수한 광물결정성을 발현되어 클링커 내 염소함량이 증가할수록 우수한 소성성 및 광물특성을 보였다.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2182-2189
• /
• 2004

In the recent years, environmentally conscious design and manufacturing technologies have attracted considerable attention. The coolants, lubricants, solvents, metallic chips and discarded tools from manufacturing operations will harm our environment and the earth's ecosystem. In the present work, the Tukey method of multiple comparisons is used to select the minimum level of coolant required in a turning process. The amount of coolant is varied in 270 designed experiments and the parameters cutting temperature, surface roughness, and specific cutting energy are carefully evaluated. The effects of coolant mix ratio as well as the amount of coolant on the turning process are studied in the present work. The cutting temperature and surface roughness for different quantity of coolant are investigated by analysis of variance (ANOVA) - test and a multiple comparison method. ANOVA-test results signify that the average tool temperature and surface roughness depend on the amount of coolant. Based on Tukey's Honestly Significant Difference (HSD) method, one of the multiple comparison methods, the minimum level of coolant is 1.0 L/min with 2% mix ratio in the aspect of controlling tool temperature. F-test concludes that the amount of coolant used does not have any significant effect on specific cutting energy. Finally, Tukey method ascertains that 0.5 L/min with 6% mix ratio is the minimum level of coolant required in turning process without any serious degradation of the surface finish. Considering all aspects of cutting, the minimum coolant required is 1.0 L/min with 6% mix ratio. It is merely half the coolant currently used i.e. 2.0 L/min with 10% mix ratio. Minimal use of coolant not only economically desirable for reducing manufacturing cost but also it imparts fewer hazards to human health. Also, sparing use of coolant will eventually transform the turning process into a more environment-conscious manufacturing process.

• 한국농공학회논문집
• /
• 제63권2호
• /
• pp.41-50
• /
• 2021

The asphalt pavement industry has introduced the warm-mix asphalt (WMA) as a mean of energy saving and environmentally safe technology, because the WMA mixture can be mixed and compacted at 30℃ lower than conventional hot-mix asphalt (HMA) at 160℃ or higher. The implementation of WMA can be a good option for paving operations for rural road in remote place, not only due to energy saving and environmental issues, but also lower working temperature. Using WMA technology, the cooled-down asphalt mixture can be still compacted to meet the quality requirement in narrow winding rural road in remote places. Therefore, this study is designed to evaluate engineering properties of WMA binders and concretes, which were prepared for rural road pavement. The objective of the study was to evaluate and suggest proper fundamental properties level of the WMA concrete for rural road pavement. The kinematic viscosity test result indicated that the WMA binders used in this study were effective for compaction at lower temperature, i.e., at 115℃, compared to the HMA binder. According to strength property analyses, it was found that the WMA concrete was acceptable for rural road pavement even though it was compacted at 30℃ lower level. Since the deformation strength (SD) of 3.2 MPa was found to satisfy rutting and cracking resistance minimum guidelines, this value was suggested as a minimum SD value for rural road pavement, considering lack of maintenance program for rural area.

• 상하수도학회지
• /
• 제9권4호
• /
• pp.97-106
• /
• 1995

An improving example for traditional rapid mix system was studied in the base of mechanisms of alum coagulation. Local status of the major water treatment plants was also investigated and evaluated for upgrading these plants. A new design and operating criterium for rapid mix system was proposed to velocity gradient, G of $1,000-1,500sec^{-1}$ and detention time, t of 1 sec from the results of experiments and literature reviews. Comparing the present rapid mix system to this criterium, apparent difference existed between them. In this study, for improving Seongnam water treatment plant, a design criterium of velocity gradient, and detention time was set to $1,100sec^{-1}$, 1 sec, respectively. A new rapid mix system adopted the nozzle injection countcurrently cross the inlet pipe to the whole area. The injection velocity was 17m/s, nozzle diameter was 1.0mm, and number of nozzle was 70. The new modified system without running present four 75 HP agitators was able to improve water quality(based on sedimentation effluent) by 15-35% and to reduce electrical energy by 98%.

• 한국도로학회논문집
• /
• 제8권1호
• /
• pp.15-23
• /
• 2006

현재의 마샬 배합설계는 공극률, VFA. VMA와 함께 가열 아스팔트 혼합물의 현장 공용성과 관련이 적은 안정도와 흐름값을 포함하고 있다. 게다가, 안정도와 흐름값은 거의 대부분 기준값에 만족하며. 최적 아스팔트 함량(OAC)은 공극률, VFA, VMA와 같은 용적특성에 의해 결정되고 있다. 그러므로 많은 연구자들은 현장 공용성과 관계를 가지는 혼합물을 만들기 위하여 안정도와 흐름값을 대신할 수 있는 역학적 특성에 관심을 가지고 있다. 본 연구에서는 마샬 배합설계방법의 안정도와 흐름값을 대신하여 역학적 특성과 관련있는 변형강도$(S_D)$와 파괴에너지(FE)를 도입하는 배합설계를 제안할 것이다. Kim test로부터 소성변형 저항성과 상관성이 높은 변형강도$(S_D)$와, 간접인장시험으로부터 피로균열을 모사하는 파괴에너지 (FE)를 도입하였다. 현재의 배합설계방법과 제안한 배합설계 방법을 비교하기 위하여 4가지 아스팔트 흔합물을 사용하였다. 제안한 배합설계가 현재의 배합설계방법에 비해 OAC결정에 역학적 특성이 반영되는 결과를 볼 수 있었다.

• 유통과학연구
• /
• 제20권4호
• /
• pp.33-50
• /
• 2022

Purpose: This pilot study aims to conceptualize a new green marketing mix for retail consumers based on Stimulus-Organism-Response (SOR) model. Moreover, it also aims to conceptualize a testable research model of new green marketing mix with consumers' green purchasing behavior, and to validate the measurement model with traditional as well as modern suggested validating techniques. Research design, data and methodology: A pilot test data from 75 respondents of retail buyers of energy-efficient electric appliances in Pakistan were tested for the confirmatory factor analysis (CFA) by examining a measurement model of the construct through different validation techniques (like Composite Reliability, McDonald's Omega (ω), rho (ρA), HTMT, etc.) as heretofore these scales were not validated through these modern methods. Results: The results revealed that the instrument has a certain degree of reliability and validity through different validating techniques. All the measurement items reach the suggested threshold values. Conclusions: Therefore, this study conceptualized an integrated framework of all the three stakeholders of the environment (government, companies, and public or consumers) to achieve environmental sustainability. Hence, future studies can extend these findings and conduct a full-scale study to establish an empirical relationship between the 5G's of green marketing for retailing businesses and consumers' green purchase behavior.

• 산업기술연구
• /
• 제16권
• /
• pp.25-30
• /
• 1996

The waste foundry sand might be recycled in concrete, resulting in energy saving and environmental protection. An half Factorial Experiments were performed with the variables of W/C ratio, S/A, Sand/Waste foundry sand ratio and Slump as a preliminary study for optimum mix design of concrete. The results show that then W/C ratio is the most important factor to the concrete strength. The substitute of waste foundry sand up to 30% has little influence, saying that it can substitute the fine aggregate without damaging the concrete properties.