• Fire Science and Engineering
• /
• v.13 no.1
• /
• pp.37-47
• /
• 1999

The spreading fire of very small floating particles after they are ignited is fast and t therefore dangerous. The research on this area has been limited to experiments and global simulations which treat them as dusts or gaseous fuel with certain concentration well m mixed with air. This research attempted micro-scale analysis of ignition of those particles modeling them as liquid droplets. For the beginning, the in-line array of fuel droplets is modeled by two-dimensional, unsteady conservation equations for mass, momentum, energy and species transport in the gas phase and an unsteady energy equation in the liquid phase. They are solved numerically in a generalized non-orthogonal coordinate. The single step chemical reaction with reaction rate controlled by Arrhenius’ law is assumed to a assess chemical reaction numerically. The calculated results show the variation of temperature and the concentration profile with time during evaporation and ignition process. Surrounding oxygen starts to mix with evaporating fuel vapor from the droplet. When the ignition condition is met, the exothermic reactions of the premixed gas initiate a and burn intensely. The maximum temperature position gradually approaches the droplet surface and maximum temperature increases rapidly following the ignition. The fuel and oxygen concentration distributions have minimum points near the peak temperature position. Therefore the moment of ignition seems to have a premixed-flame aspect. After this very short transient period minimum points are observed in the oxygen and fuel d distributions and the diffusion flame is established. The distance between droplets is an important parameter. Starting from far-away apart, when the distance between droplets decreases, the ignition-delay time decreases meaning faster ignition. When they are close and after the ignition, the maximum temperature moves away from the center line of the in-line array. It means that the oxygen at the center line is consumed rapidly and further supply is blocked by the flame. The study helped the understanding of the ignition of d droplet array and opened the possibility of further research.

• Journal of Sensor Science and Technology
• /
• v.10 no.6
• /
• pp.328-337
• /
• 2001

The stochiometric mix of evaporating materials for the $CdGa_2Se_4$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, $CdGa_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $630^{\circ}C$ and $420^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CdGa_2Se_4$ single crystal thin films measured from Hall effect by van der Pauw method are $8.27{\times}10^{17}cm^{-3}$, $345\;cm^2/V{\cdot}s$ at 293 K, respectively. From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the $CuInSe_2$ single crystal thin film, we have found that the values of spin orbit splitting ${\Delta}So$ and the crystal field splitting ${\Delta}Cr$ were 106.5 meV and 418.9 meV at 10 K, respectively. From the photoluminescence measurement on $CdGa_2Se_4$ single crystal thin film, we observed free excition ($E_x$) existing only high quality crystal and neutral bound exiciton ($D^{\circ}$, X) having very strong peak intensity. Then, the full-width-at -half-maximum(FWHM) and binding energy of neutral donor bound excition were 8 meV and 13.7 meV, respectivity. By Haynes rule, an activation energy of impurity was 137 meV.

• Journal of Korean Society on Water Environment
• /
• v.32 no.2
• /
• pp.142-148
• /
• 2016

The characterization of stormwater runoff from mix land-use catchments with an inadequate sewer network is a challenge. This study focused on characterizing stormwater runoff from the Paldang watershed area based on land-use type and sewer system coverage. A total of 76 sites were monitored during wet weather from seven different counties within Paldang watershed. Public sewer system (PSS) was installed at 48 sites, while 28 sites had no or individual sewer system (ISS) coverage. The results indicated that the sites included in the ISS group with higher forest and paddy land-use percentage exhibit higher values of average event mean concentrations (EMCs) and first flush intensity for suspended solids (SS), total nitrogen (TN), and total phosphorous (TP). In addition, upgrading runoff interception system can capture 59 % of the TP load in the first 43% of runoff within these sites. Similarly, rainfall depth and storm duration showed a positive correlation (R > 0.6) with nutrient loads within ISS group sites, as compared to PSS group. Therefore, these sites are likely to contribute higher TP and TN loads during heavier storm events and should be selected as priority management areas to combat the problem of eutrophication in Paldang reservoir.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.1
• /
• pp.21-29
• /
• 2016

We mix food waste leachate and sewage sludge by the proportion of 1:9, 3:7 and 5:5. It turns out that they produced 233, 298 and 344 $CH_4{\cdot}mL/g{\cdot}VS$ of methane gas. The result suggests that as the mixing rate of food waste leachate rises, the methane gas productions increases as well. And more methane gas is made when co-digesting sewage sludge and food waste leachate based on the mixing ratio, rather than digesting only sewage sludge alone. Modified Gompertz and Exponential Model describe the BMP test results that show how methane gas are produced from organic waste. According to the test, higher the mixing rate of food waste leachate is, higher the methane gas productions is. The mixing ratio of food waste leachate that produces the largest volume of methane gas is 3:7. Modified Gompertz model and Exponential model describe the test results very well. The correlation values($R^2$) that show how the results of model prediction and experiment are close is 0.92 to 0.98.

• KDI Journal of Economic Policy
• /
• v.34 no.2
• /
• pp.55-93
• /
• 2012

In Korea, energy policies are actualized through various energy-related plans. Recently, however, as high-ranking plans, which are very vision-oriented, continually set higher sector-by-sector goals, subordinate action plans, which require consistency, encounter distortions in their establishment process. Also, each subordinate action plan reveals limitations in terms of securing flexibility of the plan in responding to uncertainties of the future. These problems pose potential risks such as causing huge social costs. In this regard, with an aim to provide empirical evidence for discussions on improving the procedure for developing and executing Korea's energy plans, this study mainly analyzes the Basic Plan on Electricity Demand and Supply-one of the most important subordinate action plans-in order to explain the problems of the Basic Plan in a logical manner, and potential problems that could occur in the process of sustaining consistency between the Basic Plan and its higher-ranking plans. Further, this paper estimates the scale of social costs caused by those problems assuming realistic conditions. According to the result, in the case of where maximum electric power is estimated to be 7% (15%) less than the actual amount in the Basic Plan on Electricity Demand and Supply, the annual generation cost will rise by 286 billion won and (1.2 trillion won) in 2020. Such social costs are found to occur even when establishing and executing the Basic plan according to the target goal set by its higher-ranking plan, the National Energy Master Plan. In addition, when another higher-ranking GHG reduction master plan requires the electricity sector to reduce emissions by additional 5% in the GHG emissions from the right mix in electricity generation with 'zero' cost of carbon emission, the annual generation cost will rise by approximately 915 billion won in 2020. On the other hand, the analysis finds that since economic feasibility of electric powers in Korea varies significantly depending on their type, Korea is expected to face very small potential social costs caused by uncertainties over the future price of carbon dioxide in the process of establishing the Basic Plan.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1137.2-1245
• /
• 2001

The ${\gamma}$-irradiated medicinal herbs were examined the genotoxicological safety to consider the possibility of application of the irradiation technology for hygienic purpose. The three medicinal herbs -Glycyrrhigae Radix, Aurantii nobilis Pericarpium and Bupleuri Radix- were irradiated with ${\gamma}$ -rays at the practical dosage of 10 kGy. The hot water extracts of the irradiated herbs were examined in two short-term in vitro tests: (1) Ames test in Salmonella typhimurium TA98 and TA100, (2) Micronucleus test in cultured Chinese hamster ovary(CHO) cells. In the Salmonella reversion assays both with and without metabolic activation, the number of revertant colonies was not increased with each extract from the irradiated herbs, compared with negative controls. No significant difference in formation of the colonies was observed between non-irradiated and 10 kGy-irradiated herbs. These results indicated that no mutagenicity of the irradiated herbs was detected. In the micronucleus tests in cultured CHO cells, the incidences of micronucleus were not increased with irradiated herbs, and no significant difference in the incidences was observed between non-irradiated and irradiated herbs. These results indicated that no cytogenetic toxicity of the irradiated herbs was detected. The results of the two in vitro tests suggest that the irradiated herbs do not show mutagenic effects and cytogenetic toxicity. Further tests of in vivo genotoxicity and chronic toxicity are needed to determine the safety of the herbs irradiated with ${\gamma}$ -rays at practical doses.

• Economic and Environmental Geology
• /
• v.55 no.2
• /
• pp.209-217
• /
• 2022

The purpose of this study was to confirm the dissolution of arsenic from the stabilized soil around abandoned coal mines by cultivation activities. Experimental soils were collected from the agricultural field around Okdong and Buguk coal mines, and the concentration of arsenic in the soil and the geochemical mobility were confirmed. The average arsenic concentration was 20 mg/kg. The soil with relatively high geochemical mobility of arsenic in the soil was used in the batch and column experiment. The limestone was mixed with soil for soil stabilization, and the mixing ratio was 3% of limestone, based on the soil weight. The phosphoric acid fertilizer (NH₄H₂PO₄) was added to the soil to simulate a cultivation condition according to the Rural Development Administration's rules. Comparative soil without mixing limestone was prepared and used as a control group. The arsenic extraction from soil was increased following the fertilizer mixing amount and it shows a positive relationship. The concentration of phosphate in the supernatant was relatively low under the condition of mixing limestone, which is determined to be result of binding precipitation of phosphate ions and calcium ions dissolved in limestone. Columns were set to mix phosphoric acid fertilizers and limestone corresponding to cultivation and stabilization conditions, and then the column test was conducted. The variations of arsenic extraction from the soil indicated that the stabilization was effectible until 10 P.V.; however, the stabilization effect of limestone decreased with time. Moreover, the geochemical mobility of arsenic has transformed by increasing the mobile fractions in soil compared to initial soil. Therefore, based on the arsenic extraction results, the cultivation activities using phosphoric fertilizer could induce a decrease in the stabilization effect.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.11
• /
• pp.1547-1551
• /
• 2011

Bakery waste (BW) is much cheaper than barley (20 to 40% the price of barley). Bakery waste and barley grain have similar chemical composition; they contain 99 and 97% organic matter (OM), 1.1 and 1.8% fat, 18 and 15% neutral detergent fibre (NDF) and 14.0 and 14.5% crude protein (CP), respectively (DM basis). The objectives of this study were to determine the effect of substituting BW for barley grain in high concentrate fattening diets for lambs on nutrient intake, growth and carcass characteristics. Forty Awassi lambs (21.75${\pm}$1 kg) weaned at the age of 65 days were assigned randomly to four experimental fattening diets differing in BW ratio in a completely randomized design. The control diet (CON) contained 20, 60, 11, 7, and 2% (DM basis) wheat straw, barley grain, soybean meal, corn grain, and minerals and vitamin mix, respectively. Bakery waste substituted barley grain by 10, 20 and 30% of the diet DM in the LBW, MBW and HBW diets, respectively. The experiment lasted for 56 days. Dry matter intake (DMI) decreased (p<0.05) in LBW diet compared to the CON diet by approximately 10%. No further reduction in DMI was observed with the higher substitution levels. Metabolizable energy intake for the CON diet (3.6 Mcal/d) was also reduced (p<0.05) compared with LBW, MBW and HBW diets (3.4, 3.4 and 3.3 Mcal/d, respectively). Final body weight for lambs fed the CON diet (34.8 kg) was higher (p<0.05) compared with lambs fed the LBW, MBW and HBW diets (30.6, 32.0 and 31.1 kg, respectively). Growth rate for lambs fed the CON diet (232 g/d) was also higher (p<0.05) compared to lambs fed the LBW, MBW and HBW diets (170, 189, and 167 g/d, respectively). Feed to gain ratio was higher (p<0.05) for lambs fed the LBW, MBW and HBW diets (7.2, 6.6 and 7.3, respectively) compared with lambs that consumed the CON diet (5.7). Body weight gain cost was reduced by approximately 8% by the MBW and HBW diets as compared with the CON diet. Dressing percentage, full gut weight, empty gut weight and liver weights were all unaffected by the BW addition to the diets and averaged 48.9%, 6.8 kg, 2.8 kg and 0.444 kg, respectively. However, fat tail weight was increased (p<0.05) with the higher levels of the BW inclusion. In conclusion, substituting BW for barley grain reduced DMI and growth performance. However, when BW substituted barley grain at the 20 and 30% of the diet DM, body weight gain cost was reduced by approximately 8%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.643-648
• /
• 1996

The changes in hydration of brown rice, Chu-chung byeo(Japonica type) were determined during storage at different storage temperatures($4^{\circ}C$, 2$0^{\circ}C$, 3$0^{\circ}C$ and 4$0^{\circ}C$) in a 4-layered laminated film pouch(PET 12${\mu}{\textrm}{m}$/AI-foil 7${\mu}{\textrm}{m}$/o-Nylon 15${\mu}{\textrm}{m}$/L-Mix100${\mu}{\textrm}{m}$). At the beginning of storage, the hydration rate of brown rice increased with higher soaking temperature, and the activation energy of hydration was 10.3kcal/mole. Water diffusion coefficient of brown rice due to storage temperature during storage at 3$0^{\circ}C$ of soaking temperature was decreased by the elapse of storage periods and increment of storage temperature(below 3$0^{\circ}C$). ).

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.769-774
• /
• 2005

Fluosilicic acid(H2SiF6) is recovered as an aqueous solution which absorbs $SiF_4$ produced from the manufacturing of industrial-graded H3PO4 or HF. Generally, fluosilicates are the salts produced by the reaction of H2SiF6 and metal salts. Addition of fluosilicates to cement endows odd properties through unique chemical reaction with the fresh and hardened cement. This study was performed to know mechanical properties and watertightness using fluosilicates based composite made from fluosilicates and other compounds. Mix proportions for experiments were modulated at 0.45 of water to cement ratio and $0.0-2.0\%$ of adding ratio of fluosilicates based composite. Evaluation for mechanical properties of concrete was conducted to know fresh state of concrete, hardening state of concrete, and watertightness. Evaluation for watertightness of concrete was carried out permeability, absorption test and porosity analysis. In addition. Scanning Electron Microscopy(SEM) and Energy Dispersive X-Ray(EDX) used for investigating micro-structure and atomic component distributed in hardened concrete. It is ascertained that characteristics of mechanical properties and watertightness was more improved than non-added because of packing role of fluosilicates based composite and pozzolanic reaction of soluble $SiO_2$. Also, concrete added fluosilicates based composite had a tendency to delay setting time and only $0.5\%$ addition of fluosilicates based composite delayed 150 minutes compared with non-added.