• 한국분무공학회지
• /
• 제20권2호
• /
• pp.70-75
• /
• 2015

Swirl flow in the gun type burner has an impact on the stabilization of the flame, improvement of the combustion efficiency. The swirl flow is created by the spinner which is inside the airtube that guide the combustion air. Gun type burner has generally the inner devices composed electronic spark plug, injection nozzle, combustion device adaptor, and spinner. These inner components change the air flow behavior passing through airtube. So, this study conducted the measurement using by hot-wire anemometer and analyzed effect of the swirl number of spinner on the exhaust air of gun type burner. Turbulence characteristics come up in this study was mean velocity, turbulence intensity, kinetic energy, shear stress and flattness factor of the air flow with the change of the distance of axial direction and tangential direction from the exit of the airtube.

• 한국의학물리학회지:의학물리
• /
• 제27권4호
• /
• pp.272-276
• /
• 2016

To investigate the optimum x-ray tube design for the dental radiology, factors affecting x-ray beam characteristics such as tungsten target thickness and anode angle were evaluated. Another goal of the study was to addresses the anode heel effect and off-axis spectra for different target angles. MCNPX has been utilized to simulate the diagnostic x-ray tube with the aim of predicting optimum target angle and angular distribution of x-ray intensity around the x-ray target. For simulation of x-ray spectra, MCNPX was run in photon and electron using default values for PHYS:P and PHYS:E cards to enable full electron and photon transport. The x-ray tube consists of an evacuated 1 mm alumina envelope containing a tungsten anode embedded in a copper part. The envelope is encased in lead shield with an opening window. MCNPX simulations were run for x-ray tube potentials of 70 kV. A monoenergetic electron source at the distance of 2 cm from the anode surface was considered. The electron beam diameter was 0.3 mm striking on the focal spot. In this work, the optimum thickness of tungsten target was $3{\mu}m$ for the 70 kV electron potential. To determine the angle with the highest photon intensity per initial electron striking on the target, the x-ray intensity per initial electron was calculated for different tungsten target angles. The optimum anode angle based only on x-ray beam flatness was 35 degree. It should be mentioned that there is a considerable trade-off between anode angle which determines the focal spot size and geometric penumbra. The optimized thickness of a target material was calculated to maximize the x-ray intensity produced from a tungsten target materials for a 70 keV electron energy. Our results also showed that the anode angle has an influencing effect on heel effect and beam intensity across the beam.

• 지역연구
• /
• 제33권1호
• /
• pp.3-16
• /
• 2017

본 논문은 에너지 효율성 지표로써 투입물로 에너지뿐만 아니라 노동과 자본 등을 동시에 고려한 총요소 에너지 효율성을 DEA에 기초하여 2005-2013년 기간 동안 우리나라 16개 시 도의 제조업 부문에 대하여 추정하였다. 추정결과에 의하면, 단일요소 에너지 효율성과 총요소 에너지 효율성 간에 차이가 존재하여 두 지표를서로 보완적으로 사용할 필요성이 있는 것으로 나타났다. 한편, 총요소 에너지 효율성 지표는 대부분의 시 도들에서 높게 나타났는데 서울, 광주, 울산, 경북 등은 프런티어에 위치하지만, 강원, 부산, 대구, 인천 등은 상대적으로 매우 비효율적인 것으로 나타났다. 또한 패널 토빗 모형을 통해 총요소 에너지 효율성의 결정 요인을 추정한 결과에 의하면, 대기업의 생산액 비중이 클수록, 에너지 다소비업종의 생산액 비중이 작을수록, 그리고 전력 사용 비중이 클수록, 총요소 에너지 효율성에 긍정적인 영향을 주는 것으로 추정되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1316-1317
• /
• 2011

This paper presents analysis of temperature and light intensity characteristics of PV modules with solar cell type. Taking the effect of sunlight irradiance on the cell temperature, the first experiment takes ambient temperature as reference input and uses the solar insolation as a unique varying parameter. Then taking the effect of the cell temperature on sunlight irradiance, the second experiment takes 1000W/$m^2$ as reference input and uses the cell temperature as a unique varying parameter. As a result, varying sunlight irradiance, the Cell-Type with the smallest change in output is HIT and the Cell-Type with the biggest change in output is a-Si. Varying the cell temperature, the Cell-Type with the smallest change in output is a-Si and the Cell-Type with the biggest change in output is Single-Si. And considering both temperature and light intensity characteristics, the Cell-Type with the smallest change in output is HIT.

• 청정기술
• /
• 제17권2호
• /
• pp.181-188
• /
• 2011

본 논문은 청정생산분야의 정부R&D투자에 대한 기업R&D투자의 대응방식(보완 또는 대체효과)을 조사하고, 기업R&D투자의 보완 대체의 효과성에 영향을 주는 주요 결정요인과의 상관관계를 분석하였다. 정부R&D지원을 받은 조사대상 207개 중에서 95개(45.9%)는 기업R&D투자가 증가하였고, 38개(18.4%)에서는 감소한 것으로 나타났다. 로지스틱 회귀분석(logistic regression analysis)을 통한 상관관계의 분석 결과, 해당기업의 R&D투자집약도가 클수록 정부R&D투자가 기업R&D투자를 보완하는 효과를 나타내고 있는 것으로 분석되었다. 반면 기업규모, 정부지원 비중, R&D인력집약도 등에서는 기업R&D투자의 보완 대체효과에 대해서 유의미한 결과가 나타나지 않았다. 이에 따라 정부의 청정생산R&D 지원효과를 높이기 위해서는 매출액 대비 R&D투자를 많이 하고 있는 기업에 보다 중점적으로 지원하는 것이 필요하다. 아울러 정부R&D사업의 선정과 지원을 보다 효과적으로 하기 위해서는 그간 추진되어왔던 R&D사업별로 사업특성에 따라 보다 미시적인 분석이 필요할 것이다.

• 한국자동차공학회논문집
• /
• 제2권2호
• /
• pp.12-23
• /
• 1994

In order to investigate the effect of turbulent intensity on combustion characteristics, new flame factor model was developed. The principal study is the evaluation of interaction of swirl, tumble and unstrutural component of flow characteristics and correlation between turbulent intensity and flame factor. Computational and experimental study has been, performed such as quasi-dimensional cycle simulation, three dimensional flow analysis, engine performance test and diagnostic simulation. From these studies, it was found that flame factor was a function of engine speed and turbulent intensity.

• 생명과학회지
• /
• 제18권10호
• /
• pp.1455-1463
• /
• 2008

The purpose of this study was to evaluate the effect of various exercise intensity on Excess post exercise energy expenditure (EPEE), Resting Metabolic Rate (RMR),thyroid hormonal changes and biochemical variables in obese and NIDDM patients. The subject of the present study were divided into four groups and four periods: trained (T; n=10), control (C; n=10), obese (O; n=10) and NIDDM (N; n=10) group. And the periods were divided as follows; Resting (RE), Maximal (MA), High intensity (HI), and Low intensity (LI). There was significant difference in RMR among different intensity of exercise. in the T (p<0.05) not in the C, O, and N groups. however, there was no significant different percent body fat among all groups. In the energy expenditure, there was significant different among C, O, N groups compare to T in HIEE (high intensity exercise energy expenditure), LIEE (low intensity exercise energy expenditure), HIEEPE (high intensity exercise energy expenditure post exercise) and LIEEPE (low intensity exercise expenditure post exercise). In the hormonal level, there was significant different in T4 level in the T group at LI period and there was also significant difference in T4, Free T3, & Free T4 levels in T group at LI period, however there was no significant different in the O and N groups except LI period. In the fatigue variables, there was significant different in lactate and ammonia levels in the N group in the period of HI compare to C. The present cross-sectional study was design to investigate the relationship between exercise intensity and RMR in four groups. The focus of this investigation was to compare RMR in aerobically trained (T), control (C), obese (O) and NIDDM (N) group. The relationship among RMR, exercise intensity and percent body fat would best be investigated using Meta Lyzer 3B, MMX3B and body composition analyzer. Each subject completed measurement of percent body fat, RMR, hormone in the period of maximal oxygen uptake exercise (MA), high intensity exercise (HI), and low intensity exercise (LI). From the results, High and Low intensity of exercise, there was a trend for an increased RMR (kcal/day) in the trained groups and control group (in case of LI) not for the obese and N groups. This is best explained not by the reduced percent body fat but by the highly induced energy expenditure (during exercise and post exercise energy expenditure) and increased T4, Free T3, and Free T4 hormonal levels in the low intensity exercise for the T group and sometimes C group.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2328-2341
• /
• 1995

An experimental study on the flow over the axisymmetric backward-facing step was carried out. The purposes of the present study are to investigate the effect of the free stream turbulence intensity on the reattachment length and to understand the turbulence structure of the recirculating flows. Local mean and fluctuating velocity components were measured in the separated and reattaching axisymmetric turbulent boundary layer over the wall of convex cylinder placed in a water tunnel by using 2-color 4-beam fiber optics laser Doppler velocimetry. As the free stream turbulence intensity increased, the reattachment length became shorter due to the enhanced mixing in the separated shear layer. It was also observed that the reverse flow velocity and turbulent kinetic energy increase with increasing free stream turbulence intensity. Spectral data and flow visualization showed that low-frequency motions occur in the separated flow behind a backward-facing step. These motions have a significant effect on the time-averaged turbulence data.

• 한국생산제조학회지
• /
• 제20권1호
• /
• pp.114-119
• /
• 2011

There is a limit to technology of improving luminous intensity uniformity and glare, known as a weakness of existing LED lamp. Because of Using many LED, LED lamp not only waste energy but have bad effect on efficiency. Our goal is to develop security lights solution which is contented with suitable area in KS(Korean Industrial Standards) and to remove glare by combining asphere in optical system with different concept. To improve luminous intensity uniformity, a reflect mirror system was used after an aspheric optical system design for this study. We made a mirror and measured it after analysing luminance changes depend on aspheric shapes with simulation program to see if aspheric shapes effect luminance distribution. We made progress to find problems and improve them by comparing measured data and analysed data. This result of the study will contribute to industry of LED lighting through developing solution of emotional illumination of LED security lights by knowing the importance of reflectivity with this study and improving luminous intensity uniformity with solving the problem.

• Earthquakes and Structures
• /
• 제23권1호
• /
• pp.75-85
• /
• 2022

The megacity Istanbul was struck by an earthquake on September 26, 2019, with a moment magnitude (Mw) of 5.8. The mainshock was followed by many aftershocks. Although the peak ground acceleration (PGA) of the mainshock was as low as 0.08 g, its effect has been more than expected. The intensive reconnaissance studies were accomplished in the highly populated Zeytinburnu and Pendik districts of Istanbul. While the earthquake (EQ) was relatively smaller concerning record-specific intensity measures; the damages such as concrete spalling in reinforced concrete (RC) members, detachment and diagonal cracking of infill walls in RC frames as well as cracks in masonry structures were reported from non-engineered and some engineered buildings. Many studies in the literature state that record-specific intensity measures are not sufficient to evaluate the seismic performance of the structures. The structure-specific intensity measures, soil characteristics, as well as significant duration, energy, and frequency content of EQs should be considered for the evaluation. Dependently, the frequency and energy contents of the Istanbul Earthquake are evaluated to discuss the possible reasons for the perceived effects and the damages. It is concluded that the EQ caused resonance effects on a variety of structures because of its complex frequency content as well as rather low building quality.