• Microbiology and Biotechnology Letters
• /
• v.45 no.1
• /
• pp.1-11
• /
• 2017

In this review, we focus on one of the most attractive biomaterials, microfibrillated cellulose (MFC). MFC, a type of nanocellulose, mainly originates from cellulose in lignocellulosic biomass. MFC represents one of incredible important natural resources due to its abundancy, renewability, and sustainability. MFC is produced through mechanical pretreatment, and it is composed of various sizes of microfibers, ranging from a few nanometers to a few micrometers. Because of the heterogenetic compositions of MFC, it possesses superior properties as a material, such as high surface area, high aspect ratio, and peculiar insolubility as a biomaterial. These properties allow MFC to be used in various bio-industries, from the traditional pulp industry to the high-tech food/bio/chemical/medical industries. However, it is difficult to use MFC on a commercial scale owing to the high energy input required during its production and the challenge of controlling its reactivity. Therefore, future studies should be focused on accurately characterizing MFC's surface morphologies, regulating its characteristics in a desirable direction, and standardizing proper guidelines for the analysis of surface morphologies its analysis.

• Restorative Dentistry and Endodontics
• /
• v.12 no.1
• /
• pp.51-64
• /
• 1986

The purpose of this study is to obtain the data of prestep in cavity preparation by observing changed conditions of laser irradiated dental hard tissues. The forty five extracted caries free human molars were divided into three groups and each group into five subgroups. A $CO_2$ laser irradiation was performed each subgroup of group I for one second with output power of 5 W, 10 Wand 20 W. On group II, laser irradiation was done ten times for 0.1 second duration using same power ratings as group I. On group III, laser irradiation was done 0.1 second, 0.2 second and 0.4 second with output power of 50 W. We investigated mineral contents and crater wall of obtained specimens, i.e., laser irradiated teeth, using computer controlled electron probe microanalyzer and scanning electron microscope. The following results were obtained: 1. Both calcium and phosphorus contents in laser irradiated enamel crater wall were increased, and magnesium content was decreased, but these trends were not statistically significant. 2. In laser irradiated dentin, change of mineral content was more significant. 3. In laser irradiated enamel and dentin, there were no significant differences on mineral content change due to irradiation condition and energy density. 4. In scanning electron microscopic study, enamel rods of the crater wall were fused and clefts were observed in parallel with the direction of enamel rod for all groups. 5. In laser irradiated dentin, irregular fusion and clefts were observed. In irradiated teeth with high power and short duration, the locally formed narrow crater wall was observed.

• International journal of advanced smart convergence
• /
• v.5 no.4
• /
• pp.15-20
• /
• 2016

When a virtual sound source for 3D auditory system is reproduced by a linear loudspeaker array, listeners can perceive not only the direction of the source, but also its distance. Control over perceived distance has often been implemented via the adjustment of various acoustic parameters, such as loudness, spectrum change, and the direct-to-reverberant energy ratio; however, there is a neglected yet powerful cue to the distance of a nearby virtual sound source that can be manipulated for sources that are positioned away from the listener's median plane. This paper address the problem of generating binaural signals for moving sources in closed or in open environments. The proposed perceptual enhancement algorithm composed of three main parts is developed: propagation, reverberation and the effect of the head, torso and pinna. For propagation the effect of attenuation due to distance and molecular air-absorption is considered. Related to the interaction of sounds with the environment, especially in closed environments is reverberation. The effects of the head, torso and pinna on signals that arrive at the listener are also objectives of the consideration. The set of HRTF that have been used to simulate the virtual sound source environment for 3D auditory system. Special attention has been given to the modelling and interpolation of HRTFs for the generation of new transfer functions and definition of trajectories, definition of closed environment, etc. also be considered for their inclusion in the program to achieve realistic binaural renderings. The evaluation is implemented in MATLAB.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.4
• /
• pp.15-20
• /
• 2010

The three dimensional information is extracted and visualized using by stereo images of the object and the method for a 3D stereoscopic image is presented by the vergence control algorithm. The matching, which is applied a undistortion of lens and the energy function, is executed for the efficient extraction three dimensional information. Especially, applying the optimized method of matched line to the multi direction of the disparity imges. The disadvantages of multi directional method and reliability expansion method is collected. The matched interesting range of the three dimensional information is visualized using by VRML and more 3D stereoscopic image is visualized through the vergence control according to distance of the object. more improved three dimensional information is provided to observer by visualizing both of them at the same time.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.3
• /
• pp.45-52
• /
• 2011

Development of rural village in the agriculture, forestry and fishing community development nongsan eoeopin samuijil improve and promote the special law, from 2004 to 2017, based on the 1000 National differentiated rural areas to maintain the "ness, and in rural areas to build basic infrastructure, a complex life-and characteristics of the rural development and participate in the preliminary planning stages and led from the bottom-up development project in the village during the project implementation period proposed by the residents of the project is a business. This study, Jeonnam local rural residents of the village to participate in Development Business to help identify and analyze the problems derive satisfaction and improve the direction and purpose it is proposed to activate. To enable business juminchamyeohyeong city committee of the doctors and residents rally the support of the local government system, including voluntary participation and bottom-up business is important for the recognition of conversions. For bottom-up business people recognize and understand the transition to a new seonjinji tour, the continued education of residents and leading to the village to town to put all my energy into education, including the leader of the residents of the town desperately needs strengthening and capacity. In addition, town residents also important for the development, awareness and active participation, residents and the local government, and established a partnership with a group of experts monitoring implementation of the main city in the shape of lack of food is the most important part is fill.

• KIEAE Journal
• /
• v.3 no.3
• /
• pp.11-18
• /
• 2003

The purpose of this study was to find out awareness of the environment-friendly planning elements for residential unit space among practitioners. The respondents in this questionnaire survey were 140 practitioners in architecture and interior design field. The major findings of this study were as follows; most of the respondents were aware of the impact of indoor built environment on residents' wellness. In addition, the survey respondents viewed that the factors for planning environment-friendly high-rise apartments were represented by gardening and energy-saving while their perception on the concept excluded comprehensive components affecting residents' life quality. Over 50% of respondents had an experience of applying environment-friendly planning elements in their works, and high frequency appeared on the general planning elements which had been applied special awareness as pro-environmental features. The respondents considered environment-friendly planning elements as important. Specially, space planning and system were considered more likely important in interior design field. In application of environment-friendly planning elements, cost, lack of consumers' awareness of and underdevelopment of environment-friendly materials were of concern. Therefore, the consumer's cognition needs to be improved for wide application about environment-friendly planning element, and then consumers are willing to pay additional construction cost of environment-friendly apartments. At the same time, the current practice that housing developers pass the additional cost on to residents needs to be changed. Then, the quality of life in high-rise residential settings can be improved. More importantly, the exchange and development of the reliable information on environment-friendly planning elements need to be made, and technical support and long-term policy for the development are required. This research showed current status of knowledge and practice in sustainable planning of unit apartment and proved basic information for future direction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.2014-2025
• /
• 2015

Wireless Sensor Networks (WSNs) are special network which has purpose of usage for gathering information of certain area and observing situation. WSNs consist of small nodes with sensing event such as temperature, movement or certain objects. The sensor has the capabilities to collect data and route data back to the sink. The sensors route data either to other sensors or back to a sink in one direction. That is, traditional WSNs communicate asymmetrically. However, under the new paradigm of the Internet of Things (IoTs) or Cyber Physical system (CPS), WSNs have potential to be used as important area. So, more research is necessary to communicate with each moving objects symmetrically in WSNs. In this paper, we proposed symmetric communication scheme among mobile objects in wireless sensor network. Simulation results show that our scheme is superior th the existing ones in terms of energy consumption and transmission success ratio.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.205-216
• /
• 1997

In order to trace the lateral post-buckling behaviors of thin-wafled space frames, a geometrically nonlinear finite element formulation is presented by applying incremental equilibrium equations based on the updated Lagrangian formulation and introducing Vlasov's assumption. The improved displacement field for symmetric thin-walled cross sections is introduced based on inclusion of second order terms of finite rotations, and the potential energy corresponding to the semitangential rotations and moments is consistently derived. For finite element analysis, tangent stiffness matrices of the thinwalled space frame element with 7 degrees of freedom including the restrained warping for each node are derived by using the Hermition polynomials as shape functions. A co-rotational formulation in order to evaluate the unbalanced loads is presented by separating the rigid body rotations and pure deformations from incremental displacements and evaluating the updated direction cosines of the frame element due to rigid body rotations and incremental member forces from pure deformations. Finite element solutions for the spatial buckling and post-buckling analysis of thin-walled space frames are presented and compared with available solutions and other researcher's results.

• Computational Structural Engineering
• /
• v.10 no.1
• /
• pp.201-211
• /
• 1997

A clearly consistent finite element formulation for geometrically non-linear analysis of space frames is presented by applying incremental equilibrium equations based on the updated Lagrangian formulation and introducing Vlasov's assumption. The improved displacement field for symmetric cross sections is introduced based on inclusion of second order terms of finite rotations, and the potential energy corresponding to the semitangential rotations and moments is consistently derived. For finite element analysis, elastic and geometric stiffness matrices of the space frame element are derived by using the Hermitian polynomials as shape functions. A co-rotational formulation in order to evaluate the unbalanced loads is presented by separating the rigid body rotations and pure deformations from incremental displacements and evaluating the updated direction cosines of the frame element due to rigid body rotations and incremental member forces from pure deformaions. Finite element solutions for the spatial buckling and post-buckling analysis of space frames are compared with available solutions and other researcher's results.

• The Korean Journal of Community Living Science
• /
• v.26 no.2
• /
• pp.225-236
• /
• 2015

Materials for nutrition education to promote nutrition intake and prevent diseases in elderly individuals were developed, nutrition education was provided to 46 elderly females for 12 weeks, and its effects on the body composition, blood profile, and nutritional quality of subjects were qualitatively analyzed. After the education program, the weight of subjects decreased from 56.7 kg to 56.0 kg (p<0.001), their body fat dropped from 20.8 kg to 19.6 kg (p<0.01), their body mass index (BMI) declined from $25.2kg/m^2$ to $24.9kg/m^2$ (p<0.01), and their percentage of body fat decreased significantly (p<0.05). On the other hand, blood sugar showed a significant increase from 131.6 mg/dl to 141.8 mg/dl (p<0.05). Overall, the percentage of nutrition intake rose. In particular, the estimated energy requirement increased from 89.3% to 99.5% (p<0.05). Further, the contrast ratio of recommended intake showed significant increases in protein (p<0.01), phosphorus (p<0.05), vitamin $B_2$ (p<0.05), vitamin $B_6$ (p<0.05), and niacin(p<0.001), and that of adequate intake showed a significant increase in sodium (p<0.05). The nutrient adequacy ratio (NAR) showed a significant increase only in niacin (p<0.05), and the index of nutritional quality (INQ) showed significant increases in protein (p<0.05) and niacin (p<0.001). After the nutrition education program, a qualitative analysis of nutrients consumed by subjects was conducted. The results show improvements across the board except for the deficient intake of calcium and folic acid, suggesting that the nutrition status of subjects changed in a positive direction through the program. The implementation of this program for elderly individuals in a continuous and repetitive manner is expected to facilitate their nutrition management.