• 한국건설관리학회논문집
• /
• 제16권3호
• /
• pp.123-131
• /
• 2015

온실가스 배출 감소 및 에너지소비량을 감소시키기 위하여 많은 정책들이 수립되고 있다. 그러나 이러한 정책은 건축물의 에너지 소비 특성을 고려하지 않고 건축물에 대하여 일괄적인 에너지 절감률을 적용하고 있다. 일괄적인 에너지소비량 절감율을 일괄적으로 적용할 경우, 에너지소비량이 적은 건축물은 이를 달성 할 수 없다. 따라서 본 연구에서는 건축물의 에너지소비특성에 따른 건축물 분류와 건축물의 에너지소비량에 따른 개별적인 에너지소비량 절감률 산정 방법에 대하여 연구하였다. 에너지소비량 특성 분석결과 건축물의 용도에 따라 에너지소비량 차이가 있음이 나타났다. 또한 이를 바탕으로 건축물을 분류하였다. 또한 기존의 건축물 에너지절감과 관련한 제도들을 분석하여 건축물의 에너지소비량 절감 목표 및 대상 등을 선정하였고. 이을 바탕으로 에너지소비량에 따른 에너지 소비량 절감률 공식을 제안하였다. 또한 서울시 공공건축물 중 제1종 근린생활시설에 본 연구에서 제안한 공식을 적용할 경우 국가 온실가스 배출로드맵에서 목표로 하고 있는 절감률 26%를 달성할 수 있음을 확인하였다. 본 연구를 통하여 건축물의 개별적인 목표 에너지절감률을 산정할 수 있지만, 건축물 목표 에너지 절감률을 실제건축물에 반영하기 위해서는 건축물의 에너지소비량과 에너지소요량의 관계 및 건축물에서 절감 가능한 에너지소비량에 대한 연구가 필요하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1161_1162
• /
• 2009

The recent environmental protection trend requires more strict energy saving, therefore every transportation system should reduce energy consumption to the minimum value. High-efficiency operation system, energy saving and $CO_2$ emissions shall be addressed as important issue in railway system. These issues are the most essential factors of railway, compared to major public transportation system. Recently, saving energy in the electric railway system has been studied. For such new energy saving, the energy storage system is considered for saving energy. Energy saving is possible by efficient use of regenerated energy. Regenerated energy is recycled amongst vehicles by mean of charge and discharge corresponding to powering and braking of electric vehicle operations. This energy saving contributes to cut $CO_2$ to reduce greenhouse gas emissions. Recycling regenerated energy demonstrate significant effect on peak cut of consumption energy in railway substation. Absorption of excess energy avoids regeneration failure due to high traction voltage. Therefore, the energy storage system is needed to be adopted to use regeneration energy when the vehicle is braking.

• 토지주택연구
• /
• 제4권4호
• /
• pp.395-406
• /
• 2013

본 연구는 주택점유형태별 주택에너지의 소비 및 절약의식, 사용형태와 향후 주택에너지 절감을 위한 정책방향을 파악하고자 한다. 분석결과는 다음과 같다. 첫째, 점유형태별로 평균값의 차이가 존재하는 것으로 나타났다. 둘째, 자가, 민간 임대 및 공공임대 거주자는 에너지 소비 및 절약의식을 잘 실천하고 있었다. 셋째, 에너지절약행위항목에서 자가주택과 임대주택거주자의 행위에 있어서는 행동의 차이가 존재하였다. 마지막으로 향후 정책방향은 소비자 중심의 인센티브 방안이 더 효율적이고 효과적으로 활용될 것이다.

• 한국주거학회논문집
• /
• 제13권2호
• /
• pp.73-78
• /
• 2002

Recently, the energy consumption has been sharply increased and the environmental pollution has been serious, resulted in increased use of fossil fuel. These facts are applied to most fields, and are especially important issues in the field of architecture. The energy consumption rate of building is about 30% of all energy consumption, and the rate of residential is about 20% of the rate of building and is increasing gradually. The purpose of this article is firstly to analyse an actual energy consumption rate of model building and compare it with alternative methods, which are applied passive system to, and secondly to suggest an optimal passive method for saving energy. The conclusion of this study is as follows; 1) As compared with the existing house on actual energy consumption rate, 6% in changing orientation to a south, 9% in using double low-e glazing and 23% in shading is decreased. 2) The change of insulation from 50 to 100mm did not show dramatical difference in energy consumption rate. 3) As changed indoor temperature at 2$0^{\circ}C$ in winter and 27$^{\circ}C$ in summer, the rate shows a reduction of 14% compared with the existing condition.

• 설비공학논문집
• /
• 제28권3호
• /
• pp.115-122
• /
• 2016

In this study, 21 energy reduction factors were selected as architecture, system & operation, and lighting and equipment parts to analyze reduction method of the load occurring in office buildings. Energy consumption simulation was performed. In the architecture part, saving rate (1.53%) of "occupant density" factor was the most efficient. In the system and operation part, saving rate (1.28%) of "interior VAV and exterior FPU type" factor was the most efficient. In case of lighting and equipment part, saving rate (12.42%) of "schedule" factor was the most efficient. In the three parts, saving rate of the lighting and equipment part was 27.32%. This was caused by the "schedule" factor. Saving rates of the architecture part and the system and operation part were 3.39% and 1.20%, respectively.

• 한국태양에너지학회 논문집
• /
• 제33권1호
• /
• pp.48-56
• /
• 2013

Energy consumption analysis of multi-family apartment is an important area of research for the design of energy-saving housing. In this study, we selected a universal type of Flat-type apartments and analyzed the heating energy consumption of variables such as U-value, G-value, infiltration rate, heating setpoint and boiler efficiency with EnergyPlus and eQUEST. With these results, we identify the characteristics of EnergyPlus and eQUEST and provided base data for the design of energy-saving housing. The results indicate that infiltration rate is the most important factors to consider. And eQUEST heating energy consumption is approximately 10% higher compared to the EnergyPlus under same condition.

• 설비공학논문집
• /
• 제23권5호
• /
• pp.342-348
• /
• 2011

This study analyzes the current and after retrofit energy consumption of lighting and cooling system of a superstore in Seoul. Energy consumption data were measured and collected with a measurement system. Annual energy consumption was calculated using TRNSYS program. After replacing lighting and chiller with higher efficiencies, annual TOE consumption decreased from 1,066 before retrofit to 832 after retrofit, saving 234 TOE (22%) in total. Similarly, total annual $TCO_2$ consumption decreased from 2,214 to 1,721, reducing 493 $TCO_2$ (22%) during this pilot study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.799-800
• /
• 2013

• Journal of Construction Engineering and Project Management
• /
• 제3권3호
• /
• pp.17-22
• /
• 2013

In many urban cities, super-tall buildings have been being constructed around New York and Chicago as the center since 1930 to improve the efficiency of land use and respond to new residential type. In terms of energy consumption, super-tall buildings are classified as a top energy consumption building. Also, as time passed, the degradation of energy performance occurs in super-tall buildings like general things so that these cannot show the initial performance planned in the design phase. Accordingly, building owners need to make a plan to apply energy saving measures to existing building during the operation phase. In order to select energy saving measures, calculus-based methods and enumerative schemes have been typically used. However, these methods are time-consuming and previous studies which used these methods have problems with not considering the initial construction cost. Consequently, this study proposes a model for selecting an optimal combination of energy saving measures which derives maximum energy saving within allowable cost using genetic algorithms. As a contribution of this research, it would be expected that a model is utilized as one of the decision-making tools during the planning stage for energy saving.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.294-299
• /
• 2013

In many urban cities, super-tall buildings have been being constructed around New York and Chicago as the center since 1930 to improve the efficiency of land use and respond to new residential type. In terms of energy consumption, super-tall buildings are classified as a top energy consumption building. Also, as time passed, the degradation of energy performance occurs in super-tall buildings like general things so that these cannot show the initial performance planned in the design phase. Accordingly, building owners need to make a plan to apply energy saving measures to existing building during the operation phase. In order to select energy saving measures, calculus-based methods and enumerative schemes have been typically used. However, these methods are time-consuming and previous studies which used these methods have problems with not considering the initial construction cost. Consequently, this study proposes a model for selecting an optimal combination of energy saving measures which derives maximum energy saving within allowable cost using genetic algorithms. As a contribution of this research, it would be expected that a model is utilized as one of the decision-making tools during the planning stage for energy saving.