• Journal of the Korean Wood Science and Technology
• /
• 제21권2호
• /
• pp.39-48
• /
• 1993

End-matched disks of 7.7cm thickness were part-time dried in vacuum press dryer to investigate the drying characteristics by using drying schedules and end treatments. The ginkgo disks could be dried faster with severer end checks and ring failures by C schedule than by S schedule. There were no significant differences in drying rates and amounts of end checks, ring failures and V-shaped checks occurred between ginkgo disks end-taped with Korean traditional paper (KTP) and those untreated. The drying time of walnut disks was slightly reduced by end-taping with KTP. And the length of end checks and V-shaped checks and the frequency of defected disk were decreased more effectively than those untreated. The tangential strains and tangential drying stresses near bark sides of ginkgo and walnut disk untreated were developed in the early stage of drying and incresed slightly curvi-linearly above fiber saturation point (fsp) and more curvi-linearly below fsp. The influence of end-taping with KTP on the drying rate for impermeable walnut disk was stronger than that for permeable ginkgo disk.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.659-665
• /
• 2016

In this paper, we propose a novel position accuracy enhancement method of a low-end GPS using digital map information. The latest digital map has various kinds of information on geographical features. The proposed method uses position information of lane marks among the geographical features. We define the position information of lane marks as the reference points. The position information of a low-end GPS acquired for a period of time is defined as the source points. In the proposed method, rotation and translation matrices between the reference and the source points are calculated by using an Iterative Closest Point(ICP) algorithm. The source points are transformed by the obtained rotation and translation matrices. Finally, the transformed source points are projected on the reference points. Through these processes, the position accuracy of a low-end GPS is ultimately enhanced. To verify the proposed method, the various real experimental results are presented.

• 한국식물병리학회지
• /
• 제3권3호
• /
• pp.198-202
• /
• 1987

밀 보리에서 crown root rot 및 leaf blotch를 이르키는 Helminthosporium sativum의 독소물질을 분리하였다. 이는 독소물질에 대한 어떤 손상도 없이 C-18 column으로 분리되었으며, 실험적으로 가능한 inhibitor를 제거하였다. Lettuce 성장과 독소물질의 농도의 반응에는 semi-log 표에서 비례하였다. 또한 pathogen host인 밀 보리의 뿌리 성장에 사용한 결과 Lettuce의 반응과 동일한 결과를 얻었다. 또한, pathogen host인 밀 보리의 뿌리 성장에 사용한 결과 Lettuce의 반응과 동일한 결과를 얻었다. 독소물질과 식물의 반응을 측정하여 dilution end-points.의 결과로, 직접적으로 독소물질의 농도를 측정하는 방법을 개발하였다. (Y=a log x+b)의 공식과 통계처리로 사용하여 얻은 a와 b의 의미를 토론하였다.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1681-1688
• /
• 2000

A dynamic model for the prediction of surface topography in high speed end milling process is developed. In this model the effect of tool runout, tool deflection and spindle vibration were taken in to account. An equivalent diameter of end mill is obtained by finite element method and tool deflection experiment. A modal parameter of machine tool is extracted by using frequency response function. The tool deflection, spindle vibration chip thickness and cutting force were calculated in dynamic cutting condition. The tooth pass is calculated at the current angular position for each point of contact between the tool and the workpiece. The new dynamic model for surface predition are compared with several investigated model. It is shown that new dynamic model is more effective to predict surface topography than other suggested models. In high speed end milling, the tool vibration has more effect on surface topography than the tool deflection.

• Bulletin of the Korean Chemical Society
• /
• 제5권4호
• /
• pp.162-167
• /
• 1984

Equilibrium and dynamical behaviors of an n-alkane poymer (decane) in solution have been investigated by a molecuar dynamics simulation method. The polymer is assumed to be a chain of elements $(CH_2)$ interconnected by bonds having a fixed bond length and bond angle, but esch bond of the polymer is allowed to execute hindered internal rotation. The calculation explicitly considers the molecular naturer of solvent by including the intermolecular interactions between slovent-solvent molecules and chain element-solvent molecule. We present the results of calculations on (1) equilibrium properties (the solvent molecule-chain element pair correlation function, chain element-chain element pair correlation function, the mean square end-to-end distance and the mean square radius of gyration of the polymer) and (2) dynamic properties (four different autocorrelation functions, namely, the autocorrelation functions for the end-to-end distance and the radius of gyration, and the velocity autocorrelation functions for the center of mass and the end point of the chain). We found that the physical properties of the polymer chain depends sensitively on temperature. Comparison of the present work with other authors' results is also presented.

• Steel and Composite Structures
• /
• 제47권3호
• /
• pp.315-337
• /
• 2023

The steel structure is an assembly of individual structural members joined together by connections. The connections are the focal point to transfer the forces which is susceptible to damage easily. It is challenging to replace the affected connection parts after an earthquake. Hence, steel plates are utilised as a structural fuse that absorbs connection forces and fails first. The objective of the present research is to develop a beam-column end plate connection with single and dual fuse and study the effect of single fuse, dual fuse and combined action of fuse and damper. In this research, seismic resilient beam-column end plate connection is developed in the form of structural fuse. The novel connection consists of one main fuse was placed horizontally and secondary fuse was placed vertically over main fuse. The specimens are fabricated with the variation in number of fuse (single and dual) and position of fuse (beam flange top and bottom). From the fabricated ten specimens five specimens were loaded monotonically and five cyclically. The experimental results are compared with Finite Element Analysis results of Arunkumar and Umamaheswari (2022). The results are critically assessed in the aspect of moment-rotation behaviour, strain in connection components, connection stiffness, energy dissipation characteristics and ductility. While comparing the performance of total five specimens, the connection with fuse exhibited superior performance than the conventional connection. An equation is proposed for the moment of resistance of end-plate connection without and with structural fuse.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.661-665
• /
• 1996

An inverse kinemetics problem of a reclaimer which digs and transports ironstones or coals in the raw yard is investigated. Because of the special features of the reclaimer of which scooping buckets are attached around the rotating drum at the end of boom, kinematic redundancy occurs in determining the joint varialbes For a given reclaiming point in space the forward kinematics yields 3 equations, however the number of involved variables in the equations are four. A plane equation approximating the surface near a reclaiming point is obtained by considering 8 adjacent points surrounding the reclaiming point. One extra equation to overcome redunduncyis further obtained from the condition that the normal vector at a reclaiming point is perpendicular to the plane. An approximate solution for a simplified problem is first discussed, Numerical solution for the oritinal nonlinear porblem with a constraint equation is also investigated. Finally a closed form solution which is not exact but sufficiently close enough is proposed by exploiting geometric constraint.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1011-1014
• /
• 1999

In this paper, a new algorithm has been presented that helps to preserve diversity as well as to enhance the convergence speed of the evolutionary programming. This algorithm is based on the cell partitioning of search region for preserving the diversity. Until now, the greater part of researches is not concerned about preserving the diversity of individuals in a population but improving convergence speed. Although these evolutions are started from multi-point search at the early phase, but at the end those search points are swarming about a one-point, the strong candidate. These evolutions vary from the original idea in some points such as multi-point search. In most case we want to find the only one point of the best solution not several points in the vicinity of that. That is why the cell partitioning of search region has been used. By restricting the search area of each individual, the diversity of individual in solution space is preserved and the convergence speed is enhanced. The efficiency of the proposed algorithm has been verified through benchmark test functions.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권2호
• /
• pp.59-64
• /
• 2014

This paper presents a method for estimating the bounding volume for image-based 3D object reconstruction. The bounding volume of an object is a three-dimensional space where the object is expected to exist, and the size of the bounding volume strongly affects the resolution of the reconstructed geometry. Therefore, the size of a bounding volume should be as small as possible while it encloses an actual object. To this end, the proposed method uses a set of silhouettes of an object and generates a point cloud using a point filter. A bounding volume is then determined as the minimum sphere that encloses the point cloud. The experimental results show that the proposed method generates a bounding volume that encloses an actual object as small as possible.

• Journal of Electrical Engineering and Technology
• /
• 제7권2호
• /
• pp.151-156
• /
• 2012

The current study presents a zero-one integer programming approach to determine the minimum break point set for the coordination of directional relays. First, the network is reduced if there are any parallel lines or three-end nodes. Second, all the directed loops are enumerated to reduce the iteration. Finally, the problem is formulated as a set-covering problem, and the break point set is determined using the zero-one integer programming technique. Arbitrary starting relay locations and the arbitrary consideration of relay sequence to set and coordinate relays result in navigating the loops many times and futile attempts to achieve system-wide relay coordination. These algorithms are compared with the existing methods, and the results are presented. The problem is formulated as a setcovering problem solved by the zero-one integer programming approach using LINGO 12, an optimization modeling software.