• 한국콘텐츠학회논문지
• /
• 제15권12호
• /
• pp.294-303
• /
• 2015

본 연구의 목적은 성찰일지를 이용한 임종간호교육이 간호대학생의 영성, 죽음의식, 임종간호태도에 미치는 영향을 평가하기 위함이다. 본 연구는 비동등성 대조군 사전사후 설계이며 대상자는 실험군 69명, 대조군 68명이었고, 교육은 매주 1회, 회기당 100분씩 총 12회기 시행하였다. 자료는 일반적 특성, 영성, 죽음의식, 임종간호태도로 구성된 구조화된 자가 보고식 설문지를 이용하여 수집하였다. 수집된 자료는 SPSS Window version 21.0을 이용하여 빈도, 백분율, ${\chi}^2$ test, Fisher's exact test와 t-test로 분석하였다. 연구결과, 성찰일지를 이용한 임종간호교육 후 실험군은 대조군에 비해 영성과 임종간호태도가 유의하게 증가하였으나 죽음의식에는 유의한 차이가 없었다. 결론적으로, 성찰일지를 이용한 임종간호교육은 간호대학생들의 영성과 임종간호태도를 향상시키는데 효과적인 교육 프로그램이라 할 수 있다.

• Steel and Composite Structures
• /
• 제27권4호
• /
• pp.509-523
• /
• 2018

This paper presents experimental results on the residual bond-slip behavior of high strength concrete-filled square steel tube (HSCFST) after elevated temperatures. Three parameters were considered in this test: (a) temperature (i.e., $20^{\circ}C$, $200^{\circ}C$, $400^{\circ}C$, $600^{\circ}C$, $800^{\circ}C$); (b) concrete strength (i.e., C60, C70, C80); (c) anchorage length (i.e., 250 mm, 400 mm). A total of 17 HSCFST specimens were designed for push-out test after elevated temperatures. The load-slip curves at the loading end and free end were obtained, in addition, the distribution of steel tube strain and the bond stress along the anchorage length were analyzed. Test results show that the shape of load-slip curves at loading ends and free ends are similar. With the temperature constantly increasing, the bond strength of HSCFST increases first and then decreases; furthermore, the bond strength of HSCFCT proportionally increases with the anchoring length growing. Additionally, the higher the temperature is, the smaller and lower the bond damage develops. The energy dissipation capacity enhances with the concrete strength rasing, while, decreases with the temperature growing. What is more, the strain and stress of steel tubes are exponentially distributed, and decrease from the free end to loading end. According to experimental findings, constitutive formula of the bond slip of HSCFST experienced elevated temperatures is proposed, which fills well with test data.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.21-32
• /
• 2002

말뚝 선단 조건에 따른 충격반향기법의 시간영역 신호를 실내 모형실험에 의하여 분석하였다. 선단조건으로는 자유단, 고정단, 암반 근입, 연약 선단부의 네 가지 조건을 고려하였으며, 이를 위하여 폴리우레탄 재질의 모형말뚝과 모노캐스트 재질의 모형암반을 제작하여 실험을 수행하였다. 실내실험 결과 각각의 경계조건에 대한 신호의 특성을 파악할 수 있었으며, 말뚝 선단 조건뿐만 아니라 말뚝과 주변 암반과의 부착상태도 추정할 수 있는 가능성을 확인하였다. 또한 실내 모형실험의 결과를 검증하기 위하여 현장실험을 수행하였으며, 암반 근입 말뚝에 대한 신호 분석 결과 충격반향기법에 의한 현장타설말뚝의 비파괴 건전도 평가는 적용성이 충분히 있는 것으로 파악되었다.

• Steel and Composite Structures
• /
• 제24권1호
• /
• pp.23-35
• /
• 2017

Current form of Corrugated-strip connectors are not popular due to the fact that the two ends of this form need to be welded to steel face plates. To overcome this difficulty, a new system is proposed in this work. In this system, bi-directional corrugated-strip connectors are used in pairs, and only one of their ends is welded to the steel face plates on each side. The other end is embedded in the concrete core. To assemble the system, common welding devices are required, and welding process can be performed in the construction sites. By performing the Push-out test under static loading, the authors experimentally assess the effects of geometric parameters on ductility, failure modes and the ultimate shear strength of the aforesaid connectors. For this purpose, sixteen experimental samples are prepared and investigated. For fifteen of these samples, one end of the shear connectors is welded to steel face plates, and the other end is embedded in the concrete. Another experimental sample is prepared in which both ends are welded to the steel face plates. According to the achieved results, several relations are proposed for predicting the ultimate shear strength and load vs. interlayer slip (load-slip) behavior of corrugated-strip connectors. Moreover, these formulas are compared with those of the well-known codes and standards. Accordingly, it is concluded that the authors' relations are more reliable.

• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.45-61
• /
• 2016

The domestic and foreign scholars conducted many studies on mechanical properties of wave web steel beam and high-strength spiral stirrups confined concrete columns. Based on the previous research work, studies were conducted on the anti-seismic property of the end plate bolt connected wave web steel beam and high-strength spiral stirrups confined concrete column nodes applied with pre-tightening force. Four full-size node test models in two groups were designed for low-cycle repeated loading quasi-static test. Through observation of the stress, distortion, failure process and failure mode of node models, analysis was made on its load-carrying capacity, deformation performance and energy dissipation capacity, and the reliability of the new node was verified. The results showed that: under action of the beam-end stiffener, the plastic hinges on the end of wave web steel beam are displaced outward and played its role of energy dissipation capacity. The study results provided reliable theoretical basis for the engineering application of the new types of nodes.

• Structural Engineering and Mechanics
• /
• 제72권3호
• /
• pp.367-382
• /
• 2019

This paper presents experimental and analytical investigations on additional fixed-end rotations resulting from the strain penetration of high-strength reinforcement in reinforced concrete (RC) beam-column connections under monotonic loading. The experimental part included the test of 18 interior beam-column connections with straight long steel bars and 24 exterior beam-column connections with hooked and headed steel bars. Rebar strains along the anchorage length were recorded at the yielding and ultimate states. Furthermore, a numerical program was developed to study the effect of strain penetration in beam-column connections. The numerical results showed good agreement with the test results. Finally, 87 simulated specimens were designed with various parameters based on the test specimens. The effect of concrete compressive strength ($f_c$), yield strength ($f_y$), diameter ($d_b$), and anchorage length ($l_{ah}$) of the reinforcement in the beam-column connection was examined through a parametric study. The results indicated that additional fixed-end rotations increased with a decrease in $f_c$ and an increase in $f_y$, $d_b$ and $l_{ah}$. Moreover, the growth rate of additional fixed-end rotations at the yielding state was faster than that at the ultimate state when high-strength steel bars were used.

• 가정간호학회지
• /
• 제30권3호
• /
• pp.276-286
• /
• 2023

Purpose: This study aimed to assess the effect of palliative care practical training for nursing students. Methods: This quasi-experimental study included 38 third-grade nursing students form one university. Practical training, develooed by experts, was provided for 2 weeks (90 h) in a palliative care hospital. Participants received education on palliative care but no clinical practical experience. Collected data were analyzed using independent t-test, χ² test and paired t-test using the WIN SPSS 23.0 program. Results: Students showed significant pretest-posttest differences in attitude toward death (t=-2.43, p=.021), end-of-life nursing attitude (t=3.90, p=<.001) and spiritual nursing competency (t=3.82, p=.001). Conclusion: The study results revealed that palliative care practical training was an effective learning method to improve nursing attitude, toward death, end-of-life nursing attitude and spiritual nursing competency. Further studied are needed to assess the effects of various education programs of palliative care.

• 한국의류학회지
• /
• 제29권11호
• /
• pp.1381-1388
• /
• 2005

The purpose of this study was to identify features of masstiege high-end products by comparing to original old high-end products. For this purpose, the differences in values between each consumer groups divided by preferred products types (high-end products, original old high-end products) were examined. This study was executed by consumer survey and 279 female data were used in analysis. The results are as follows. First, the value factors pursued on high-end products were constructed by factor analysis and the factors consisted of 4 elements; conspicuous, aesthetic, durable, conformity. Next, the differences in value elements between masstiege high-end products and original old high-end products were identified by t-test. The consumers preferring original old high-end products pursued conspicuous features significantly more and the consumers preferring masstiege high-end products considered aspects of aesthetic and conformity elements as more important. And according to kinds of preferring high-end product, demographic characteristics were different. The consumers who were of high age, high education and high income and married consumers preferred original old high-end products, whereas the consumers who were of low age, low education and low income and unmarried consumers preferred masstiege high-end products. Finally, marketing strategies for masstiege brand were suggested on the base of the results.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.83.1-83.1
• /
• 2010

A Dead-end mode operation is one of the best way to maximize the gas usage rate. But, some components of fuel cell stack like gas diffusion layer(GDL) or membrane can be damaged in dead-end mode operation. In this study, a Large Scale Polymer electrolyte membrane fuel cell(PEMFC) for a dead-end operation has been developed. The stack is composed with 4 cells which has over 400cm2 of active area. Hydrogen is used as a fuel, and oxygen is used as a oxidant. The dead-end operation performance was evaluated by a long-term dead-end mode operation. The fuel cell stack is operated over 1,500 hours in dead-end mode operating fuel cell test station. And the performance change of the fuel cell stack was investigated.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1993년도 춘계공동학술대회 발표논문 및 초록집; 계명대학교, 대구; 30 Apr.-1 May 1993
• /
• pp.329-338
• /
• 1993

The main objective of this paper is analyzing the effects of task uncertainty on EUC characteristics and end user satisfaction. Task uncertainty were identified as an important determinant of EUC characteristics. And the moderating effect of task uncertainty on the relationship between EUC characteristics and end user satisfaction was suggested. A field study was undertaken to test the hypothesized relationships among task uncertainty, EUC characteristics, and end user satisfaction Data were collected from 138 end-user of 19 Korean business organizations. The empirical results indicated that task uncertainty was significantly related to EUC characteristics and that task uncertainty had significant effect on the relationship between EUC characteristics and end user satisfaction. Implications and future research directions are drawn for the management of EUC and for further research on EUC.