• Journal of Communications and Networks
• /
• 제12권2호
• /
• pp.103-113
• /
• 2010

In this paper, a tradeoff between the total energy consumption-per-bit and the end-to-end rate under spatial reuse in wireless multi-hop network is developed and analyzed. The end-to-end rate of the network is the number of information bits transmitted (end-to-end) per channel use by any node in the network that is forwarding the data. In order to increase the bandwidth efficiency, spatial reuse is considered whereby simultaneous relay transmissions are allowed provided there is a minimum separation between such transmitters. The total energy consumption-per-bit includes the energy transmitted and the energy consumed by the receiver to process (demodulate and decoder) the received signal. The total energy consumption-per-bit is normalized by the distance between a source-destination pair in order to be consistent with a direct (single-hop) communication network. Lower bounds on this energy-bandwidth tradeoff are analyzed using convex optimization methods. For a given location of relays, it is shown that the total energy consumption-per-bit is minimized by optimally selecting the end-to-end rate. It is also demonstrated that spatial reuse can improve the bandwidth efficiency for a given total energy consumption-per-bit. However, at the rate that minimizes the total energy consumption-per-bit, spatial reuse does not provide lower energy consumption-per-bit compared to the case without spatial reuse. This is because spatial reuse requires more receiver energy consumption at a given end-to-end rate. Such degraded energy efficiency can be compensated by varying the minimum separation of hops between simultaneous transmitters. In the case of equi-spaced relays, analytical results for the energy-bandwidth tradeoff are provided and it is shown that the minimum energy consumption-per-bit decreases linearly with the end-to-end distance.

• 정보과학회 논문지
• /
• 제44권1호
• /
• pp.107-113
• /
• 2017

실시간 멀티캐스팅은 소스가 발생시킨 패킷을 제한시간 내에 다수의 목적지로 전달하는 방법이다. 무선 센서 망에서는 종단간 지연이 거리에 비례하므로, 제한시간 안에 전송가능한 최대거리가 존재한다. 기존 실시간 멀티캐스팅 방안은 고정된 최대거리를 정하고, 목적지들로의 패킷 전달 경로가 이를 넘지않도록 하여 실시간 멀티캐스팅을 달성했다. 하지만, 제한시간이 가변적인 환경에서, 기존방안은 고정된 제한거리로 인해 실시간 전송실패나, 에너지효율 저하 등의 문제가 발생한다. 이 문제를 해결하기 위해, 본 논문은 제한시간을 이용한 실시간 멀티캐스팅 프로토콜을 제안한다. 제안방안은 제한시간을 이용해 최대 전송가능거리를 계산하고, 이를 이용해 멀티캐스팅 경로를 구성한다. 제안방안이 구성하는 멀티캐스팅 경로는 제한시간이 짧은 경우 실시간성에, 긴 경우 에너지효율성에 초점을 맞추어 구성된다. 실험결과는 제안방안이 기존방안보다 실시간전송 성공률과 에너지효율성 면에서 더 나은 성능을 달성할 수 있음을 보인다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권1호
• /
• pp.69-78
• /
• 2008

국내산 낙엽송 집성재 볼트, 드리프트 핀 접합부의 내력성능평가를 위해 인장형 전단강도시험을 실시하였다. 인장형 전단시편은 강판삽입형 볼트, 드리프트 핀 접합부 시편과 강판측재형 볼트접합부시편으로 제작하였다. 실험에 사용된 볼트와 드리프트 핀의 직경은 12, 16, 20 mm였다. 시편의 접합구멍은 끝면거리 5, 7 d로 제작하였고 인장하중은 섬유평행방향으로 가하였다. 끝면거리에 따른 접합부의 내력성능을 검토하고 Larsen의 항복추정식을 통해 항복하중을 실측항복하중과 비교하였다. 설계표준 시 끝면거리 7 d의 항복하중을 기준으로 5 d의 저감계수를 산출하였다. 본 연구의 결과는 다음과 같다. 1. 강판삽입형 접합부에서 드리프트 핀 접합부의 평균최대하중은 직경이 증가함에 따라 볼트 접합부보다 3~30% 정도 크게 나타났다. 볼트 접합부의 경우 강판측재형의 평균최대하중은 강판삽입형보다 1.54~2.07배 크게 나타났다. 동일 직경에서 끝면거리 7 d의 평균최대하중이 5 d보다 8~44% 정도 크게 나타났다. 2. 강판삽입형 접합부의 지압응력은 드리프트 핀 접합부가 볼트보다 1.16~1.41배 더 크게 나타났으며, 7 d가 5 d보다 1.37~1.86배 크게 나타났다. 또한 드리프트 핀 접합부의 세장비는 7.5 이하, 강판삽입형 볼트 접합부의 세장비는 6 이하에서 양호한 내력성능을 보였다. 3. 실측 항복하중과 Larsen이 제안한 항복하중 추정식에 의해 얻어진 항복하중값의 비는 강판삽입형 접합부의 경우 0.80~1.10, 강판측재형 접합부는 0.75~1.46이었다. 4. 끝면거리 7 d의 항복하중을 기준으로 강판삽입형 볼트접합부의 경우 12 mm 접합부의 저감계수(Ke)는 0.89, 16 mm는 0.93, 20 mm는 0.85였다. 강판삽입형 드리프트 핀 접합부의 경우 12 mm는 0.89, 16 mm는 0.93, 20 mm는 0.93이었다. 강판측재형 직경 12 mm 볼트접합부의 저감계수는 0.79, 16 mm는 0.80이었다.

• 대한임베디드공학회논문지
• /
• 제13권2호
• /
• pp.83-91
• /
• 2018

With the development of IT (Information Technology) technology, embedded system and network technology are combined and used in various environments such as military environment as well as everyday life. In this paper, we propose a new airdropped distributed mobility model (ADMM) modeling the dispersion falling of the direct shot of a cluster bomb, and we compare and analyze some representative MANET routing protocols in ADMM in ns-3 simulator. As a result of the analysis, we show OLSR routing protocol is promising in ADMM environment in the view points of packet delivery ratio (PDR), end to end delay, and jitter. In addition, we propose a new adaptation scheme for OLSR, AND-OLSR (Average Node Distance based adaptive-OLSR) to improve the original OLSR in ADMM environment. The new protocol calculates the average node distance, adapts the period of the control message based on the average node distance increasing rate. Through the simulation study, we show that the proposed AND-OLSR outperforms the original OLSR in PDR and control message overhead.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.316-323
• /
• 2000

In railway train operations, a braking distance between two trains must be controlled on their speeds to avoid rear end collisions. The distance is decided by some parameters such that propulsion and braking performance of trains, gradient and etc. When determining this block distance, it is important to consider the two aspects that safety insurance at train running and increase of train running frequency. In this paper, we showed a methodologies of equiblock by consideration gradients and calculated optimal block speeds on the basis of the equivalent block distance.

• Bulletin of the Korean Chemical Society
• /
• 제5권4호
• /
• pp.162-167
• /
• 1984

Equilibrium and dynamical behaviors of an n-alkane poymer (decane) in solution have been investigated by a molecuar dynamics simulation method. The polymer is assumed to be a chain of elements $(CH_2)$ interconnected by bonds having a fixed bond length and bond angle, but esch bond of the polymer is allowed to execute hindered internal rotation. The calculation explicitly considers the molecular naturer of solvent by including the intermolecular interactions between slovent-solvent molecules and chain element-solvent molecule. We present the results of calculations on (1) equilibrium properties (the solvent molecule-chain element pair correlation function, chain element-chain element pair correlation function, the mean square end-to-end distance and the mean square radius of gyration of the polymer) and (2) dynamic properties (four different autocorrelation functions, namely, the autocorrelation functions for the end-to-end distance and the radius of gyration, and the velocity autocorrelation functions for the center of mass and the end point of the chain). We found that the physical properties of the polymer chain depends sensitively on temperature. Comparison of the present work with other authors' results is also presented.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권5호
• /
• pp.1-11
• /
• 2017

This study focused on the ultimate behaviors(ultimate strength and fracture mode ) of single shear bolted connection with austenitic sainless steel(STS201) and curling effect on the ultimate strength using finite element analysis based on test results. Main variables are end distance in the parallel direction to loading and edge distance in the perpendicular direction to loading. The validation of finite element analysis procedures was verified through the comparisons of ultimate strength, fracture mode and curling(out-of-plane deformation) occurrence between test results and numerical predictions. Curling was observed in both test and analysis results and it reduced the ultimate strength of single- shear bolted connections with relatively long end distances. Strength reduction ratios caused by curling were estimated quantitatively by maximum 19%, 32%, respectively for specimens with edge distance, 48 mm and 60 mm compared with strengths of uncurled connections with restrained out-of-plane deformation. Finally, analysis strengths were compared with current design strengths and it is found that design block shear equations did not provide the accurate predictions for bolted connections with strength reduction by curling.

• Clinics in Shoulder and Elbow
• /
• 제8권2호
• /
• pp.88-96
• /
• 2005

Purpose: To compare and analyze the outcome of primary clavicular lateral end resection method and conventional acromioclavicular (AC) joint reduction method in type III AC dislocation patients over 45 years. Materials and Methods: This study was performed on selected 24 cases of type III AC dislocation patients, over 45 years of age, operated at our hospital from 1998 to 2002. Group I consist of 12 patients who underwent primary clavicular lateral end resection methods (average age: 54.3 years$(45{\sim}72)$). Group II consist of 7 patients using Bosworth methods and 5 patients using Phemister methods (average age: 54.4 years$(45{\sim}71)$). Clinical outcome was evaluated by Weaver and Dunn method. Radiological results were compared by measuring coracoclavicular distance between normal and injured side. Results: As clinical outcome, good was 10 cases(83%); fair 2(17%) in Group I, and good 6(50%); fair 3(25%); poor 3(25%) in Group II. In contrast, the difference of coracoclavicular distance was not statistically significant between two groups before or after surgery, and last follow up. At the last follow up, there was no special correlation between the difference of coracoclavicular distance and clinical outcome. Conclusion: We considered that primary clavicular lateral end resection may be effective for prevention of arthrosis in AC joint in type III AC dislocation patients over 45 years.

• Journal of Communications and Networks
• /
• 제6권4호
• /
• pp.317-330
• /
• 2004

In this paper, we explore the utility of recently discovered multiple-antenna techniques (namely MIMO techniques) for medium access control (MAC) design and routing in mobile ad hoc networks. Specifically, we focus on ad hoc networks where the spatial diversity technique is used to combat fading and achieve robustness in the presence of user mobility. We first examine the impact of spatial diversity on the MAC design, and devise a MIMO MAC protocol accordingly. We then develop analytical methods to characterize the corresponding saturation throughput for MIMO multi-hop networks. Building on the throughout analysis, we study the impact of MIMO MAC on routing. We characterize the optimal hop distance that minimizes the end-to-end delay in a large network. For completeness, we also study MAC design using directional antennas for the case where the channel has a strong line of sight (LOS) component. Our results show that the spatial diversity technique and the directional antenna technique can enhance the performance of mobile ad hoc networks significantly.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1153-1156
• /
• 1996

본 논문은 새로운 지역 경로 계획 알고리즘으로 DPH(Distance Profile Histogram)방법과 뉴럴네트워크를 사용한 주행 방법을 제안한다. DPH방법은 격자형 환경 모델을 기반으로 장애물의 존재 유무와 거리정보와 같은 장애물의 기하학적 배치정보를 사용하게 된다. 또한 긴 장애물이나 막힘상황(Dead end)과 같이 지역 경로 계획만으로는 회피하기 어려운 상황에서는 뉴럴네트워크에 의해 학습된 정보에 의해 주행하는 방법을 사용했다.