• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.225-236
• /
• 2016

Objectives: Nanomaterials have been used in various fields. As use of nanoproducts is increasing, workers dealing with nanomaterials are also gradually increasing. Exposure assessments for nanomaterials have been carried out for protection of worker's health in workplace. Exposure studies were mainly focused on manufacturing processes, but these studies on after-treatment processes such as refinement, weighing, and packing were insufficient. So, we investigated exposure characteristics of particles during after-treatment processes of $Al_2O_3$ fibers and Ni powders. Methods: Mass-production of Ni powder process was carried out in enclosed capture-type canopy hood. In a developing stage, $Al_2O_3$ was handled with a local ventilation unit. Exposure characteristics of particles were investigated for $Al_2O_3$ fiber and Ni powder processes during the periods of 10:00 to 16:00, 20 May 2014 and 13:00 to 16:00, 21 May 2014, respectively. Three real-time aerosol instruments were utilized in exposure assessment. A scanning mobility particle sizer(SMPS, nanoscan, model 3910, TSI) and an optical particle counter(OPC, portable aerosol spectrometer, model 1.109, Grimm) were used to determine the particle size distribution in the size range of 10-420 nm and $0.25-32{\mu}m$, respectively. In addition, a nanoparticle aerosol monitor(NAM, model 9000, TSI) was used to measure lung-deposited nanoparticle surface area. Membrane filters(isopore membrane filter, pore size of 100 nm) were also used for air sampling for the FE-SEM(model S-5000H, Hitachi) analysis using a personal sampling pump(model GilAir Plus by 2.5 L/min, Gilian). Conclusions: For Ni powder after-treatment process, only 27% increase in particle concentration was found during the process. However, for $Al_2O_3$ fiber after-treatment process, significant exposure(1.56-3.34 times) was observed during the process.

• Korean Journal of Organic Agriculture
• /
• v.23 no.1
• /
• pp.91-101
• /
• 2015

'Chuhwangbae' pears (Pyrus pyrifolia Nakai) were investigated on how types of paper bag and harvesting dates influenced on skin blackening before harvest as well as fruit quality after harvest. Experiments included four different types of paper bags (NP/YP, GP/YP, NP/BP, and NP/RP) and five different harvesting dates [160, 170, 180, 190, and 200 days after full bloom (DAFB)]. NP/YP and GP/YP indicated for newspaper- and gray paper-outer bag, respectively, with yellow paper-inner bag of the both. NP/BP and NP/RP indicated for newspaper-outer bag of the both with black paper- and red paper-inner bag, respectively. The NP/YP (newspaper/yellow paper) showed high absorbance and air and water vapor permeability in the bags, while the NP/RP (newspaper/red paper) resulted in poor physical properties in the bags. Fruit enclosed with NP/YP resulted in the absence of skin blackening, but fruit with NP/RP bags had the highest skin blackening (12.7%). Occurrence of skin blackening was concentrated on the middle and calyx end-part of fruit region. NP/RP bag treatment was likely to increase fruit weight, firmness, titratable acidity, and fruit surface color. Harvest at high relative humidity in air increased skin blackening of fruit. Later fruit harvest, such as 190 and 200 DAFB, increased skin blackening, fruit weight, and sugar content while decreasing fruit firmness and titratable acidity.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.158-162
• /
• 2014

Purpose: Reference material (RM) is defined as material that is safe and homogeneous enough about specified characteristic that is made with a purpose of using test of measurement or nominal characteristic. Certified reference material (CRM), which is issued by authorized organization, is defined as reference material that provides characteristic value, link uncertainty and retroactivity. The purpose of this paper was to evaluate recovery of radioimmunoassay by Certified Reference Material enclosed with a certificate and therefore to enhance reliability of test. Materials and Methods: WHO certified reference material is purchased from NIBSC (National Institute for Biological Standard and Control, United Kingdom) and made of 3 levels that are C-1 (low concentration), C-2 (medium concentration) and C-3 (high concentration) and measured for kit at the Seoul National University Hospital. Recovery rate is evaluated after measurement at four different days. Results: Recovery rate results using WHO certified reference material are T4 90%, Ferritin 88%, PSA 94%, Prolactin 99%, AFP 94% and TSH 93%. Conclusion: A procedure that appropriate accuracy, precision, specificity, sensitivity, reproducibility, and validate on the subject of kit for radioimmunoassay is essential. Recovery rate assay as extraction efficiency of analysis process is percent about already measuring results of analysis result after all measuring process. This is very important assessment standards of performance evaluation of immunoassay kit. Recovery rate results of 6 type used WHO CRM are satisfactory to 88~99%. This demonstrates that the radioimmunoassay is a very accurate measurement, which is very effectively utilized in clinical practice.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.2
• /
• pp.169-176
• /
• 2000

This study was carried out to clarify the spatial and temporal patterns of macrobenthic assemblages on the subtidal area around Mokpo, southwest of Korea. A total of 238 species and 663 ind./$m^{2}$ were collected. Polychaetes were the most abundant faunal group that comprised 88 species and had a mean density of 389 ind./$m^{2}$. In the semi-enclosed Youngsan River estuarine bay and neighbouring Mokpo Port area were composed of fine sediments with high organic content, and revealed large seasonal variations in the salinity of surface water and bottom dissolved oxygen in contrast to little seasonal changes in those parameters in the outer area. The study area was classified into four station groups by the cluster analysis; the harbor area, the offshore area, and the inner and outer estuarine bay. Two estuarine bay areas showed different species composition; the dominant species of inner bay were Tharyx sp., Poecilochaetus johnsoni, Heteromastus filiformis and other opportunistic species whereas those in the outer bay were Ruditapes philippinarum, Corophium sinense. From the environmental data and species composition of benthic community, the inner bay was characterized to have unstable benthic faunal assemblages, especially under the seasonal disturbance and receiving large amount of organic matter input and intermittant discharge of fresh water. The coastal developments around Mokpo city also seem to have stressed the subtidal communities spatio-temporally.

• Journal of Korea Water Resources Association
• /
• v.47 no.3
• /
• pp.285-295
• /
• 2014

We applied the ISPSO-GLUE method, which integrates the Isolated-Speciation-based Particle Swarm Optimization (ISPSO) with the Generalized Likelihood Uncertainty Estimation (GLUE) method, to the uncertainty analysis of the Topography Model (TOPMODEL) and compared its performance with that of the GLUE method. When we performed the same number of model runs for the both methods, we were able to identify the point where the performance of ISPSO-GLUE exceeded that of GLUE, after which ISPSOGLUE kept improving its performance steadily while GLUE did not. When we compared the 95% uncertainty bounds of the two methods, their general shapes and trends were very similar, but those of ISPSO-GLUE enclosed about 5.4 times more observed values than those of GLUE did. What it means is that ISPSOGLUE requires much less number of parameter samples to generate better performing uncertainty bounds. When compared to ISPSO-GLUE, GLUE overestimated uncertainty in the recession limb following the maximum peak streamflow. For this recession period, GLUE requires to find more behavioral models to reduce the uncertainty. ISPSO-GLUE can be a promising alternative to GLUE because the uncertainty bounds of the method were quantitatively superior to those of GLUE and, especially, computationally expensive hydrologic models are expected to greatly take advantage of the feature.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.441-446
• /
• 2008

This study was conducted to determine the effect of heat stress on laying hen performance during summer. A total of 180 Hyline-brown layers, 98 days of age, were housed in a enclosed house. The daily maximum temperature in the house was ranged $26{\sim}36^{\circ}C$. The egg production was markedly fallen than other days when daily maximum temperature in the layer house became more than $33^{\circ}C$. As water intake and feed intake increased to $490\;mL\;bird^{-1}\;day^{-1}$ and $240\;g\;bird^{-1}\;day^{-1}$, the egg production soared. But it was hardly increased more than them. Based on these results, layer house roof should be amply insulated to improve the egg production of layers. If not insulated, the shade curtain should be installed above roof and cool water sprayed before and after 2 p.m. And layers should be provided cool drinking water of about $15^{\circ}C$ in the day time.

• Journal of Animal Environmental Science
• /
• v.17 no.2
• /
• pp.101-106
• /
• 2011

One hundred and forty-four cross-bred market pigs weighing approximately 110 kg were randomly divided into four groups in a 2 (handling stress; minimal vs stimulated) ${\times}$ 2 (transport vehicle type; enclosed box vs conventional open) factorial arrangement of treatments. The stimulated handling stress group received overally rough handling including electric prod stimulation during loading, transport and lairage at least once at each step. All the animals received 3-h lairage prior to slaughter. Blood and longissimus dorsi muscle (LM) samples were taken at slaughter and after overnight chilling of the carcass, respectively. Plasma concentrations of stress indicators glucose, cortisol, creatine kinase and lactate dehydrogenase were greater in the stimulated vs minimal handling stress group. There were no interactions between the handling stress and transport vehicle type in their effects on these blood variables. The incidence of pale, soft and exudative (PSE) carcass and drip loss of LM, 24-h postmortem LM pH and color including the lightness and redness were not affected by the handling stress and transport vehicle type. In conclusion, results suggest that rough handling inflicts a stimulated stress on the animal, which is manifested by increased blood concentrations of stress indicators, and therefore should be avoided for animal welfare.

• Journal of Animal Environmental Science
• /
• v.16 no.2
• /
• pp.109-114
• /
• 2010

In South Korea, mora than 90% of swine barns had open-style side wall by winch operation, and less than 5% of swine barns were semi-windowless or windowless style. The aisle ventilation system of the barn was changed to roof-wall ventilation system, and the width and the length of barns were 10~12 m and 30~50 m, respectively. The width of aisle satisfying energy save was 2~3 m. The re-modeled barns inhaled air through duct which was opened to aisle and exhaled through forced ventilation fans on the windowless wall which was accomplished by installing planks on the open wall. After remodelling, the culling ratio and energy cost were decreased from 11% (47 heads) to 3% (12 heads) and from 1,550,000 won to 730,000 won, respectively. Hence, re-modeled swine barns raising 400 heads could save 2,835,680 won during winter (from December to March).

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.2
• /
• pp.68-74
• /
• 2009

Polycyclic aromatic hydrocarbons (PAHs), one of ubiquitous organic pollutants in marine environments, are major toxic components of petroleum and are produced during the incomplete combustion of organic materials. As shipyards are located inside of natural or artificial semi-enclosed bay, even a relatively weak environmental disturbance by ship-building activity can cause severe damage to marine ecosystem in the bay. Many studies of pollution in shipyard area have been focused on the antifouling agent, like tributyltin. This study aimed to investigate the effect of ship-building activity on PAH contamination. Total PAHs concentration was higher nearby and inside shipyard area than outside, implying that shipyard could be one of major source area of PAH contamination to pose harmful effects to surrounding environments. Through PAH profile and source recognition index, the source of PAHs inputs in this area was estimated to originate from both petrogenic and pyrogenic origin. PAH levels showed a significant correlation with total butyltins, indicating that ship-building activity influenced PAH concentration and distribution. Vertical distribution of PAHs historically confirmed the correlation between shipbuilding activity and PAHs contamination.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.4
• /
• pp.113-122
• /
• 2018

Thermal stress of pigs causes decreased feed consumption and weight gain rate, immunosuppression, reproductive disorders, and increased mortality. The concept of the temperature-humidity index (THI) has been widely used to evaluate the degree of thermal stress of pigs. However, use of this concept is strongly restricted for animals living in the enclosed facilities. In this study, Building Energy Simulation (BES) technique was used to realize the energy flow among outside weather conditions, building materials, and animals. Especially, mechanisms of sensible and latent heat generation from pigs according to surrounding air temperature and their weight were designed to accurately evaluate the THI values inside the pig house. The THI values computed by the BES model were compared to those calculated by method of the report (NIAS, 2016), the model of this study predicted the start date of heat stress about 9~76 days earlier compared to the NIAS model. Results of the BES model also showed higher frequencies of the THI above the THI threshold for pigs, indicating that conventional model has a possibility of underestimating the degree of heat stress of pigs.