• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.267-275
• /
• 2020

Anthocyanins are antioxidant compounds susceptible to environmental factors. Anthocyanin encapsulation into yeast cells is a viable solution to overcome this problem. In this study, the optimal factors for anthocyanin encapsulation were investigated, including anthocyanin concentration, plasmolysis contraction agent, and ethanol concentration, and response surface methodology was evaluated, for the first time. Anthocyanin from Hibiscus sabdariffa L. flowers was encapsulated into Saccharomyces cerevisiae using plasmolysis contraction agent (B: 3%-20% w/v), ethanol concentration (C: 3%-20% v/v), and anthocyanin concentration (A: 0.15-0.45 g/ml). The encapsulation yield and anthocyanin loss rate were determined using a spectrometer (520 nm), and color stability evaluation of the capsules was performed at 80℃ for 30 min. The results of the study showed that these factors have a significant impact on the encapsulation of anthocyanin, in which ethanol agents have the highest encapsulation yield compared to other factors in the study. Statistical analysis shows that the independent variables (A, B, C), their squares (A², B², C²), and the interaction between B and C have a significant effect on the encapsulation yield. The optimized factors were anthocyanin, 0.25 g/ml; NaCl, 9.5% (w/v); and ethanol, 11% (v/v) with an encapsulation yield of 36.56% ± 0.55% and anthocyanin loss rate of 15.15% ± 0.98%; This is consistent with the expected encapsulation yield of 35.46% and loss rate of 13.2%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.270-270
• /
• 2016

We fabricated an organic-inorganic nano laminated encapsulation layer using molecular layer deposition (MLD) combined with atomic layer deposition (ALD). The $Al_2O_3$ inorganic layers as an effective single encapsulation layer were deposited at 80 degree C using ALD with alternating surface-saturation reactions of TMA and $H_2O$. A self-assembled organic layers (SAOLs) were fabricated at the same temperature using MLD. MLD and ALD deposition process were performed in the same reaction chamber. The prepared SAOL-$Al_2O_3$ organic-inorganic nano laminate films exhibited good mechanical stability and excellent encapsulation property. The measurement of water vapor transmission rate (WVTR) was performed with Ca test. We controlled thickness-ratio of organic and inorganic layer, and specific ratio showed a lowest WVTR value. Also this encapsulation layer contained very few pin-holes or defects which were linked in whole area by defect test. To apply into real OLEDs panels, we controlled a film stress from tensile to compressive and flexibility defined as an elastic modulus with organic-inorganic ratio. It has shown that OLEDs panel encapsulated with nano laminate layer exhibits better properties than single layer encapsulated in acceleration conditions. These results indicate that the organic-inorganic nano laminate thin films have high potential for flexible display applications.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.2005-2008
• /
• 2008

A cyclotetraphosphazene derivative with eight chains was synthesized from octachlorocyclotetraphosphazene. The vesicles were prepared using the cyclotetraphosphazene derivative and cholesterol. The resulting vesicles were characterized by TEM and measurements of their encapsulation efficiency. The stability of the vesicles was enhanced with the addition of dihexadecylphosphate. The size and the encapsulation efficiency of the vesicles changed according to the amount of cholesterol added. The size and the encapsulation efficiency of the vesicle were lowest when the mole ratio (cholesterol: the cyclophosphazene derivative) was 0.9.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.22-26
• /
• 2021

Thin-film encapsulation (TFE) technology is most effective in preventing water vapor and oxygen permeation in the organic light emitting diodes (OLED). Of those, a laminated structure of Al₂O₃ and MgO were applied to provide efficient barrier performance for increasing the stability of devices in air. Atomic layer deposition (ALD) method is known as the most promising technology for making the laminated Al₂O₃/MgO and is used to realize a thin film encapsulation technology in organic light-emitting diodes. Atomic layer deposited inorganic films have superior barrier performance and have advantages of excellent uniformity over large scales at relatively low deposition temperatures. In this study, the control system of the MgCP₂ precursor for the atomic layer deposition of MgO was established in order to deposit the MgO layer stably by the injection time of second level and the stable heating temperature. The deposition rate was obtained stably to be from 4 to 10 Å/cycle using the injection pulse times ranging from 3 to 12 sec and a substrate temperature ranging from 80 to 150 ℃.

• Archives of Pharmacal Research
• /
• v.14 no.4
• /
• pp.336-341
• /
• 1991

The effect of bovine serum albumin (BSA) on the encapsulation efficiency and stability of liposomes containing methotrexate (MTX) having different surface charges and cholesterol contents were investigated. The encapsulation efficiency of MTX was lower and the release of MTX was faster by the addition of BSA. The leaking of MTX from lipid bilayer depends upon the BSA concentrations. These results may be derived from the interaction of BSA with lipid bilayers. The dynamic structural changes of BSA were monitored indirectly using circular dichroism spectra. Observed dynamic structural changes of BSA with liposomes are presumed to reflect the interaction of BSA with liposomes. Negatively charged liposomes have more strong interaction with BSA than neutral and positively charged liposomes. BSA attacks lipid bilayers whether it is at the inner or at the outer phase of lipid bilayer and induces leakage of entrapped MTX. Especially, negatively charged liposomes are more sensitive than others. The inclusion of cholesterol in the lipid layers inhibits the interaction of BSA with liposomes and shows protective effect against BSA-induced leakage of MTX. To endure the attacking of BSA liposomes as drug carriers should be made using cholesterol.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.5
• /
• pp.333-336
• /
• 2005

The objective of this study was to investigate the stability of tetracycline HCl on encapsulation into and inside reverse micelles. To do so, tetracycline HCl was first mixed with cetyltrimethylammonium bromide, water and ethyl formate to make reverse micelles. The degradation kinetics of tetracycline HCl inside the reverse micelles was then assessed by scrutinizing its stability data. Under our experimental conditions, the reverse micelles formed spontaneously in absence of any mixing devices. During the preparation of the reverse micelles, however, considerable portions of tetracycline HCl underwent a chemical reaction (e.g., epimerization). For instance, $51.4{\pm}0.6%$ of an initial concentration of tetracycline HCl was transformed into a degradation product. Once dissolved inside the reverse micelles, the degradation of tetracycline HCl followed an exponential decay pattern. The plot of log{the degradation rate of tetracycline HCl} versus log{tetracycline HCl concentration} made it possible to determine the order of degradation reaction and rate constant. It was proven that the degradation of tetracycline HCl inside the reverse micelles followed a first order kinetics with a rate constant of 0.0027 $hour^{-1}$. Meriting further investigation might be formulation studies to stabilize tetracycline HCl on encapsulation into and inside the reverse micelles.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.1
• /
• pp.7-13
• /
• 2005

Chitosan-alginate capsules were formed by electrostatic interactions and exhibited an appropriate mechanical strength, permeability, and stability for the culture of hepatocytes. Pig hepatocytes were isolated and hepatocyte spheroids formed and immobilized in chitosan-alginate capsules. An encapsulation procedure of 3 min and spheroid formation period of 24 h were the optimum conditions for the best liver functions. Pig hepatocytes with a cell density of $6.0{\tomes}10^6$ cells/ml in the capsules were found to be most suitable for application in a bioartificial liver support system. The encapsulated pig hepatocyte spheroids exhibited stable ammonia removal and urea secretion rates in a bioreactor for 2 weeks. Accordingly, chitosan-alginate encapsulated hepatocyte spheroids in a packed-bed bioreactor would appear to have potential as a bioartificial liver.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.54-57
• /
• 2007

A cyclotetraphosphazene derivative having eight chains was synthesized from octachlorocyclotetraphosphazene, which was employed along with cholesterol for the preparation of vesicles. The resulting vesicles were characterized by TEM and encapsulation efficiency. The stability of the vesicles was enhanced in the presence of dihexadecylphosphate.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.3
• /
• pp.313-320
• /
• 2011

Encapsulation of L-ascorbic acid(AA) into BGsome was attempted to improve its stability. BGsome is a bio-compatible vesicular system prepared by dispersion of hydrated liquid crystalline phase formed through hydration of 1,3-butylene glycol(BG)-dissolved lecithin with an aqueous solution containing hydrophilic component. The characteristics of AA encapsulated BGsome, such as droplet size, surface charge, and solution appearance, was investigated. The concentration of AA solution had considerable effect on droplet size and surface charge of BGsome. Several tens nanometer droplet made by sonication treatment did not showed any change of size with storage time. Stability of AA was improved by encapsulation into BGsome, which was verified through DPPH test and HPLC assay.

• Korea-Australia Rheology Journal
• /
• v.13 no.4
• /
• pp.179-187
• /
• 2001

As part of continuing efforts to investigate nonlinear dynamics and stability of film casting process, our earlier results obtained by Lee et al. (2001b) have been extended in the present study to cover the film casting of both extension thickening and extension thinning fluids. The same instability mechanism and draw resonance criterion previously derived have been found valid here, and a rather complex dynamic behavior of film width in contrast to that of film thickness has also been confirmed. The effect of fluid viscoelasticity on draw resonance, however, exhibits opposite results depending on whether the fluid is extension thickening or thinning, i.e., it stabilizes film casting in the former while destabilizing in the latter. The encapsulation extrusion method which recently has been successfully employed to stabilize industrially important paper coating process, has been theoretically explained in the present study as to why such stabilization is possible.