• Mass Spectrometry Letters
• /
• v.7 no.1
• /
• pp.26-29
• /
• 2016

Simultaneous determination of three corticosteroids (clobetasol propionate, betamethasone dipropionate, fluticasone propionate) in moisturizers was performed by using liquid chromatography (LC) coupled with tandem mass spectrometry (MS/MS). Sample preparation was conducted by the liquid-liquid extraction (LLE). Moisturizers include emulsifying agent and it forms micelles. In order to improve the extraction efficiency of corticosteroids trapped in micelle, newly developed-optimized extraction conditions which can remove the matrix effect from moisturizers was applied with various pH conditions in LLE extraction stage of sample preparation. Thus, the addition of 10 μL of 1 M HCl into moisturizers sample before extraction could improve the extraction efficiency. For the quantitative analysis, SRM table that contained specific transition of all of target corticosteroids was created. The developed method was validated for linearity, accuracy, precision, limit of detection (LOD), limit of quantization (LOQ) and recovery. Over the 0.99 r² value was obtained in calibration standard range. Effective accuracy and precision were also obtained. LODs were below 31 ng/mL and LOQs were estimated below 94 ng/mL for all corticosteroids tested.

• Membrane and Water Treatment
• /
• v.4 no.1
• /
• pp.11-25
• /
• 2013

Emulsion liquid membrane (ELM) process suffers from emulsion instability problem. So far, emulsion produced by mechanical methods such as stirrer and homogenizer has big size and high emulsion breakage. This paper discussed the application of emulsion produced by sonicator to extract cadmium in a batch ELM system. The emulsions consist of N,N-Dioctyl-1-octanamine (trioctylamine/TOA), nitrogen trihydride (ammonia/NH4OH), sorbitan monooleate (Span 80), and kerosene as carrier, stripping solution, emulsifying agent, and organic diluent, respectively. Effects of comprehensive parameters on extraction efficiency of Cd(II) such as emulsification time, extraction time, stirring speed, surfactant concentration, initial feed phase concentration, carrier concentration, volume ratio of the emulsion to feed phase, and pH of initial feed phase were evaluated. The results showed that extraction efficiencies of Cd(II) greater than 98% could be obtained under the following conditions: 15 minutes of emulsification time, 4 wt.% of Span 80 concentration, 4 wt.% of TOA concentration, 15 minutes of extraction time, 250 rpm of stirring speed, 100 ppm of initial feed concentration, volume ratio of emulsion to feed phase of 1:5, and initial feed pH of 1.53.

• Journal of the Korean Ceramic Society
• /
• v.41 no.3
• /
• pp.242-246
• /
• 2004

Nano-sized a-alumina with a narrow distribution was prepared by using Flame Spray Pyrolysis (FSP). The microemulsion of water in oil (W/O) was prepared to make ultrafine droplets for FSP process. Kerosene (fuel) as a continuos phase and Al(NO$_3$)$_3$$.$9$H_2O$ (oxidizer) aqueous solution as a dispersed phase were prepared for microemulsification. The microemulsion with dispersion stability was obtained by adjusting the composition of 80 vol% kerosene, 10 vol% aqueous solution, and 10 vol% emulsifying agent. Microemulsion was sprayed onto the flame by using two-fluid nozzle spray gun under the condition of 0.03 ㎫ air pressure. The synthesized products were $\alpha$-alumina phase with the size of 20 to 30 nm.

• Journal of the Korean Applied Science and Technology
• /
• v.3 no.1
• /
• pp.65-71
• /
• 1986

Four amphoteric surfactants, 1-(N-alkyl-N,N-dimethyl ammonio)-4-naphthalene sulfonates, were prepared by the alkylation of 1-(N,N-dimethylamino)-4,naphthalene sulfonic acid with chloroalkanes such as 1-decylchloride, 1-tetradecyl chloride and 1-hexadecyl chloride. These quaternary ammonium compounds such as 1-(N-decyl-N, N-dimethylammonio)-4-naphthalene sulfonate, 1-(N-dodecyl-N,N-dimethylammonio)-4-naphthalene sulfonate, 1-(N-tetradecyl-N,N-dimethylammonio)-4-naphthalene sulfonate and 1-(N-hexadecyl-N,N-dimethylammonio)-4-naphthalene sulfonate could be separated by means of thin layes chromatography and column chromatography. The surface chemical properties such as surface tension, foaming power, foam stability, wetting efficiency and solubilizing effect for these four compounds were measured. Also critical micelle concentration and hydrophilic-lipophilic balance(HLB) were evaluated. These compounds showed good surface as O/W type emulsifying agent and detergent.

• Journal of the Korean Applied Science and Technology
• /
• v.3 no.1
• /
• pp.57-64
• /
• 1986

1-(carboxyalkyl) trimethyl ammonium chlorides such as 1-(carboxyundecyl) trimethyl ammonium chloride and 1-(carboxytridecyl) trimethyiammonium chloride were synthesized by the reaction of ${\alpha}-bromoalkanoic$ acid with trimethyl amine hydrochloride. In other hand, (carboxymethyl) alkyl dimethyl ammonium chlorides such as (carboxymethyl) dodecyl dimethyl ammonium chloride and (carboxymethyl) tetradecyl dimethyl ammonium chloride were synthesized by the reaction of alkyl dimethylamine with sodium chloroacetate. The four kinds of alky carboxy betaine such as 2-(trimethylammonio) dodecanoate, 2-(trimethyl ammonio) tetradecanoate, (dodecyl dimethylammonio) ethanoate and (tetradecyl dimethyl ammonio) ethanoate were prepared from 1-(carboxyalkyl) trimethyl ammonium chlorides or (carboxymethy1) alkyl dimethyl ammonium chlorides. The surface activities including surface tension, emulsifying power, foaming power, foam stability, deflocculating effect, effectiveness of wettability and solubilizing effect were measured and also critical micelle concentration and hydrophilic-lipophilic. balance(HLB) were evaluated. These carboxy betaines show good surface activities as O/W type emulsifing agent and detergent.

• Journal of the Korean Applied Science and Technology
• /
• v.6 no.1
• /
• pp.51-57
• /
• 1989

A series of four sodium ${\alpha}-sulfo$ fatty vinyl ester oligomers including sodium ${\alpha}-sulfo$ lauric acid vinyl ester oligomer, sodium ${\alpha}-sulfo$ myristic acid vinyl ester oligomer, sodium ${\alpha}-sulfo$ palmitic acid vinyl ester oligomer and sodium ${\alpha}-sulfo$ stearic acid vinyl ester oligomer were examined for surface activities such as surface tension, foaming power, foam stability, emulsifying power, dispersion effect, solubilization of orange OT. The critical micelle concentration(CMC) was also evaluated. Consequently, these sodium ${\alpha}-sulfo$ fatty acid vinyl ester oligomers were shown to have a good cohesive power and dispersion effect.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.81-82
• /
• 2011

This paper is to compare and analyze WOE created by emulsifying waste oil & WOES added by stimulant with the existing SR in order to solve the problem of strength and reduction in fluidity occurring in time of the use of waste oil to reduce the autogenous shrinkage of high strength mortar. As experimental results, in case of WOE, there almost never happened a drop in fluidity at 1% replacement and compressive strength also showed the strength value similar to Plain. On the other hand, the effect of strength improvement consequent upon the use of stimulant was found to be insufficient. The change of autogenous shrinkage generally showed a better reduction effect in shrinkage comparing to Plain. In case of WOE1, reduction effect in autogenous shrinkage was found to be more excellent than the existing SR. Accordingly, WOE1 is analyzed to be desirable if reduction in autogenous shrinkage, strength & up to the aspect of fluidity are taken into consideration.

• Membrane and Water Treatment
• /
• v.10 no.5
• /
• pp.361-372
• /
• 2019

Effect of different alkane based solvents on the stability of emulsion liquid membrane was investigated using normal alkanes (n-hexane, n-heptane, n-octane and n-decane) under various operating parameters of surfactant concentration, emulsification time, internal phase concentration, volume ratio of internal phase to organic phase, volume ratio of emulsion phase to external phase and stirring speed. Results of stability revealed that emulsion liquid membrane containing n-octane as solvent and span-80 (5 % (w/w)) as emulsifying agent presented the highest amount of emulsion stability (the lowest breakage) compared with other solvents; however, operating parameters (surfactant concentration (5% (w/w)), emulsification time (6 min), internal phase concentration (0.05 M), volume ratio of internal phase to organic phase (1/1), volume ratio of emulsion phase to external phase (1/5) and stirring speed (300 rpm)) were also influential on improving the stability (about 0.2% breakage) and on achieving the most stable emulsion. The membrane with the highest stability was employed to extract acridine orange with various concentrations (10, 20 and 40 ppm) from water. The emulsion liquid membrane prepared with n-octane as the best solvent almost removed 99.5% of acridine orange from water. Also, the prepared liquid membrane eliminated completely (100%) other cationic dyes (methylene blue, methyl violet and crystal violet) from water demonstrating the efficacy of prepared emulsion liquid membrane in treatment of dye polluted waters.

• Journal of Digital Convergence
• /
• v.13 no.4
• /
• pp.417-423
• /
• 2015

Oil-in-water(o/w) nanoemulsions were prepared in the system of water/Span 80-Tween 80/long-chain paraffin oil via PIC method. With the increase of preparation temperature from 30 oC to 80 oC, the diameter of emulsion droplets decreased from 150 nm to 40 nm. By varying the HLB of mixed surfactants, we found that there was an optimum HLB around 13.0~14.0 corresponding to the minimum droplet size. The size of emulsion droplets increased upon increasing the ratio of oil/emulsifying agent. At $f{\leq}0.15$, the size of nanoemulsions could be kept constant more than 2 months. The increase in preparation temperature makes it possible for producing monodisperse nanoemulsions. Once the nanoemulsion is produced, the stability against Ostwald ripening is outstanding due to the extremely low solubility of the liquid paraffin oil in the continuous phase.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.1
• /
• pp.29-35
• /
• 2016

RS White (resorcinol bis-ethylhexanoate) is used in cosmetics as a skin whitening agent. In this study, we studied the possibility of nano-emulsion formation containing whitening agent, RS White, with different types of emulsifying agents. With Tween 80, 60, HCO 60 and 40 as a hydrophilic surfactants and Span 80 as ahydrophilic surfactant, nano-emulsions were formed at appropriate concentrations, but they were not formed in the system using the Myrj 52, Montanov L, and Tegocare 450 with Span 80. The diameter of nano-emulsion sphere was smaller than 100 nm. The emulsion showed a translucent appearance and maintained stability in stability evaluation with time. In vitro skin permeation experiments showed that amounts of skin permeated nano-emulsion for 24 h were $70.84{\mu}g/cm^2$ and those of O/W emulsion were $28.97{\mu}g/cm^2$. In conclusion, a stable nano-emulsion containing the resorcinol bis-ethylhexanoate is effective for potential efficacy system as an efficient delivery system of the functional materials into skin.