• 공업화학
• /
• 제31권4호
• /
• pp.404-410
• /
• 2020

본 연구에서는 Box-Behnken 설계모델(BBD-RSM)을 사용하여 회화나무꽃 추출물을 첨가한 cosmeceuticals 유화액의 안정성 조건을 최적화하였다. BBD-RSM의 독립변수로는 유화제의 첨가량, 회화나무꽃 추출물 첨가량, 유화시간, 유화속도 등을 설정하고, 반응치로는 O/W 유화액의 평균액적크기(MDS), 점도 및 유화안정도지수(ESI)를 설정하였다. BBD-RSM 최적화 분석결과 세 가지 반응치를 동시에 부합하는 최적조건은 유화시간(17.8 min), 유화속도(5505 rpm), 유화제의 첨가량(2.28 wt.%), 회화나무꽃 추출물 첨가량(1.05 wt.%)으로 산출되었으며, 이 조건에서의 BBD-RSM 예측결과는 MDS (1875.5 nm), 점도(1789.7 cP), ESI (93.8%)로 얻었다. 또한 이 조건에서 실제 실험을 통해 얻은 결과는 이론 결과에 비래 평균오차율은 5% 이하로 나타났다. 따라서 본 연구에서 BBD-RSM 최적화 분석을 적용할 경우 비교적 높은 유의수준의 만족하는 결과를 얻을 수 있었다.

• 한국환경과학회지
• /
• 제6권5호
• /
• pp.473-480
• /
• 1997

Microorganisms producing bioemulslfiler were isolated from the sea water In Pusan coastal area. The isolated strain which had the highest emulsification activity and stability was identified as the genus Achetobacter from the results of morphological. cultural and biochemical tests and named Achetobacter sp. EL-C6 for convenience. The compositions of optimum medium for emulsification of crude oil by Acinetobacter sp. EL-C6 were crude oil 2.0%, NH4NO3 0.2%, $K_2HPO_4$ 0.01%, $MgSO_4$.$7H_2O$ 1.o%, $CaCl_2$.$2H_2O$ 0.1% and NaCl 3.0% at initial pH 7.5 and 3$0^{\circ}C$, respectively. The cultivation for emulsification of crude ell was carried out in 500m1 shaking flask containing 100m1 of the optimum medium at 3$0^{\circ}C$. The highest emulsification was observed after 5 days. The utilization on the various hydrocarbon of the Achetobacter sp. EL-C6 showed that utilization of n-alkane compounds were better than that of aromatic compounds. Among the petroleum compounds, crude ell was best utilized by the Achetobacter sp. EL-C6.

• 한국응용과학기술학회지
• /
• 제15권2호
• /
• pp.25-32
• /
• 1998

The emulsion stability of W/O emulsion prepared by D phase emulsification during storage and handling is studied by using phase diagrams. The process of D phase emulsification begins with the formation of isotropic surfactant solution, followed by formation of oil-in-surfactant (O/D) gel emulsion by dispersion of octamethylcyclotetrasiloxane(OMCS) in the surfactant solution. Polyols were essential components for this purpose. To understand the function of polyols, the solution behavior of nonionic surfactant/oil/water/polyol systems were investigated by the ternary phase diagrams of polyoxyethylene oleyl ether/OMCS/propylene glycol(PG) aqueous solutions. The addition of PG increased the solubility of oil in the isotropic surfactant phase. D phase emulsification method has been applied to a new type of cosmetics. By using this emulsification technique, O/W emulsion were formed without a need for adjust of HLB. Fine and stable W/O emulsions were prepared by D phase emulsion.

• Membrane and Water Treatment
• /
• 제10권5호
• /
• pp.361-372
• /
• 2019

Effect of different alkane based solvents on the stability of emulsion liquid membrane was investigated using normal alkanes (n-hexane, n-heptane, n-octane and n-decane) under various operating parameters of surfactant concentration, emulsification time, internal phase concentration, volume ratio of internal phase to organic phase, volume ratio of emulsion phase to external phase and stirring speed. Results of stability revealed that emulsion liquid membrane containing n-octane as solvent and span-80 (5 % (w/w)) as emulsifying agent presented the highest amount of emulsion stability (the lowest breakage) compared with other solvents; however, operating parameters (surfactant concentration (5% (w/w)), emulsification time (6 min), internal phase concentration (0.05 M), volume ratio of internal phase to organic phase (1/1), volume ratio of emulsion phase to external phase (1/5) and stirring speed (300 rpm)) were also influential on improving the stability (about 0.2% breakage) and on achieving the most stable emulsion. The membrane with the highest stability was employed to extract acridine orange with various concentrations (10, 20 and 40 ppm) from water. The emulsion liquid membrane prepared with n-octane as the best solvent almost removed 99.5% of acridine orange from water. Also, the prepared liquid membrane eliminated completely (100%) other cationic dyes (methylene blue, methyl violet and crystal violet) from water demonstrating the efficacy of prepared emulsion liquid membrane in treatment of dye polluted waters.

• 한국미생물·생명공학회지
• /
• 제25권4호
• /
• pp.420-426
• /
• 1997

Pseudomonas sp. lipase (lipase AK) catalyzed transesterification reaction between fructose and vinyl laurate in anhydrous pyridine. The product of this process was identified as monoester of fructose and vinyl laurate. The synthetic product has been found to be an excellent emulsifier. The synthetic bioemulsifier showed a good emulsification activity and stability in comparison with other commercial emulsifiers, and good emulsification activity on various emulsifying substrates.

• Applied Biological Chemistry
• /
• 제50권1호
• /
• pp.12-17
• /
• 2007

태백산 토양에서 유화활성과 안정도가 높은 biosurfactant 생산균주 TBM 3101을 분리하여 동정한 결과 B. subtilis로 판명되었다. B. subtilis TBM 3101의 배양액에서 표면장력은 최저 29mN/m까지 감소되었고, 이후 장시간 계속 유지되었다. 또한, tributyrin을 기질로 사용하였을 때 2.68로 가장 큰 유화력을 보였고, 그 외에 soybean oil, crude oil, tetradecane 에서도 비슷한 활성을 보였다. 각종 다른 합성계면활성제의 유화활성 및 안정성을 고려하여 비교 분석한 결과 B. subtilis TBM 3101 생산하는 biosurfactant는 tween류와 span 85와 유사한 유화활성을 나타내었고, tween 80과 triton X-100과 비슷한 유화 안정도를 보여주었다.

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.299-306
• /
• 2009

The purpose of this study was to prepare stable water-in-corn oil (W/O) emulsion droplets coated by polyglycerol polyricinoleate (PGPR). W/O emulsions (20 wt% aqueous phase, 80 wt% oil phase containing 8 wt% PGPR) were produced by high pressure homogenization (Emulsions 1), however, appreciable amount of relatively large water droplets (d>$10{\mu}m$) were found. To facilitate droplet disruption, viscosity of each phase was adjusted: (i) increased the viscosity of aqueous phase by adding 0.1 wt% xanthan (Emulsions 2); (ii) decreased the viscosity of oil phase and aqueous phase by heating them separately at $50^{\circ}C$ for 1 hr immediately before emulsification (Emulsions 3). Homogenizing at the elevated temperature clearly led to a smaller water droplet size, whereas xanthan neither improved nor adversely affected on the microstructures of the emulsions. In addition, the Emulsions 3 had good stability to droplet aggregation under shearing stress, thermal processing, and long term storage.

• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.1478-1486
• /
• 2018

Liquid crystals offer plenty of useful activities as improving the stability of emulsion, increasing moisturizing power, drug release, improving skin feeling and visual effect for cosmetics fields. In order to prepare stable semi-transparent gel emulsion, liquid crystal emulsification method was used. The emulsion stabilities of systems containing glycerin, fatty alcohols, surfactants, water and oil were investigated at various temperatures as time passed. The stabilities of all emulsions were evaluated by means of a polarizing microscope, SEM, rheometer, colorimeter and DSC. Even though the samples stored at $50^{\circ}C$ thermostatic chamber were occurred the reduction of hardness, turbidity and ${\Delta}H$ and the peak shift, the semi-transparent gel emulsion was very stable without separation between water and oils phase in emulsion.

• 공업화학
• /
• 제32권3호
• /
• pp.357-360
• /
• 2021

Emulsions were prepared using a mixture of bio-oil obtained from the pyrolysis of sawdust in an N₂ environment and Quercus mongolica in a CH₄ environment for both non-catalytic and catalytic cases. Both prepared emulsions were examined by measuring the physical stability and Fourier transform infrared spectroscopy. The emulsion with HLB 5.8 (Span 80 and Atlox 4916) for the ratio of bio-oil (B-oil and C-oil): surfactant: diesel = 10% : 3% : 87% showed stability for 15 days. Combining oils produced in N₂ and CH₄ environments could be a potential solution for generating high-quality emulsions with a high heating value.

• 한국환경과학회지
• /
• 제16권8호
• /
• pp.873-879
• /
• 2007

For the purpose of development of an environmentally friendly aqueous cleanser, some experimental researches on emulsification of D-limonene were performed. OA series surfactants with different molecular weight were adapted as an emulsifier for preparation of O/W emulsion. Cleaning power of aqueous cleanser was measured by a dipping method adapting abietic acid(AA) as a solubilizate. Besides, drop size and drop size distribution, contact angle and storage stability of the aqueous cleansers were also measured and relationships among them were examined. Decrease in molecular weight of surfactant induced small drop size and contact angie, resulting in high cleaning power of aqueous cleanser. Aqueous cleanser consisted of 3wt.% OA300 and 30wt.% D-limonene showed the highest cleaning power, but displayed unfortunately with low storage stability. The storage stability of the aqueous cleanser with OA300 was significantly enhanced by addition of 0.5wt.% OA600 at the expanse of decrease in cleaning power.