• 한국방재안전학회논문집
• /
• 제16권4호
• /
• pp.45-59
• /
• 2023

세계적으로 온실가스 감축을 위해 주로 이산화탄소 발생에 초점을 맞춰왔지만, 최근에는 메탄 발생에 대한 관심이 커지고 있다. 습지, 저수지, 호소 등 수중 환경을 포함한 자연은 온실 가스 중요한 발원지이다. 호수와 저수지 바닥에 쌓인 퇴적된 유기 오염물질은 산소가 부족한 상태에서 미생물 분해를 통해 메탄과 같은 온실 가스를 생성할 수 있다. 메탄 배출은 비점오염원의 증가와 하천에 설치되는 횡단 구조물에 의한 흐름변화에 의해 증가하고 있는 실정이다. 또한, 기후 변화로 인한 수온의 상승 등은 메탄 배출을 가속화하는 원인이다. 메탄은 다양한 경로를 통해 대기로 배출될 수 있다. 따라서, 본 연구에서는 메탄발생의 주요인자가 미치는 영향을 정량화하기 위하여 BMP test을 수행하였다. 실험조건에 따라 메탄발생량을 직접 계측하였으며, 실험조건은 온도, 기질의 종류, 전단응력 및 퇴적물 특성으로 구분하였다. 또한, 바닥의 전단 응력은 실험적으로 측정하기가 어려워 수치모의를 수행하였다. 실험결과, 생화학적 요소는 메탄 생성에 영향을 미치지만, 전단 속도는 메탄 분리에 영향을 미치는 것으로 나타났으며, 퇴적물 특성은 메탄 생성 및 분리에 영향을 미칠 수 있다. 메탄 생성과 주요인자들 간의 관계를 경험식으로 제시하였으며, 향후 전단응력 및 유기물에 대한 실험조건을 구체화하고 실험규모를 확대한다면 메탄발생과 생지화학 및 수환경인자간의 관계를 도출할 수 있을 것으로 기대된다.

• 마케팅과학연구
• /
• 제19권1호
• /
• pp.23-35
• /
• 2009

A hypermarket as the one of the most globally standardized retailing format is also the type of store among various types of stores that the most active in expanding into other foreign markets. Recently, as several Korean retailing companies start to penetrate into Chinese market they differentiate themselves with modern facilities and customers service oriented high-end concept. China and Korea as Far East Asian countries share many common values, however precise and careful analysis should be carried out since there may also be critical differences in socio-economic aspects as well as in consumption patterns due to the level of development stages of retail industry among two countries. Even though precise and careful study is crucial on Chinese retailing market and consumers, none of researches and studies on 'how the quality of service dimensional structure is different between Korea and China', and 'what will be the most important and influential service dimensional factors for Chinese consuers compared to the hypermarkets customers in Korea' in order to improve the level of Chinese consumers satisfaction' have been fulfilled At this point of view, this study uses KD-SQS (Rho Eun Jung & Sir Yong Gu, 2008) which is a measure of Korean hypermarkets service quality to set up a hypothesis on Korean and Chinese consumers, and an empirical analysis is conducted. We try to get the answers about how the comparative importance of Service quality dimensions which decides the level of customer satisfaction is different depending on the cultural dimensions and socio-economic factors among two countries, Korea and China. Based upon the results, we try to give a valuable suggestion of what service dimensional factors should be reinforced to improve the level of CS in Chinese retailing market. Hypotheses for this study are as follows : H1. Each dimension of Service Quality significantly affects the level of CS H2. The effect of 'Basic Benefit' in service quality dimensions on the level of CS is greater in China than in Korea H3. The effect of 'Promotion' in service quality dimensions on the level of CS is greater in China than in Korea H4. The effect of 'Physical Aspects'in service quality dimensions on the level of CS is greater in Korea than in China. H5. The effect of 'Personal Interaction' in service quality dimensions on the level of CS is greater in China than in Korea H6. The effect of 'Policy' in service quality dimensions on the level of CS will be greater in Korean than in China H7. The effect of additional convenience in service quality dimensions on the level of CS will be greater in Korean than in China. More than 1,100 data were collected directly from the surveys of Chinese and Korean consumers in order to verify the hypotheses above. In Korea, stores which have floor space of over $9,000m^2$and opened later than year 2000 were selected for the samples, and thus Gayang, Wolgye, Sangbong, Eunpyeong, Suh-Suwon, Gojan stores and their customers were surveyed. In China, notable differences in the income levels and consumer behaviors between cities and regions were considered, and thus the research area was limited to the stores only in Shanghai. 6 stores which have the size of over $6,000m^2$ and opened later than 2000, such as Ruihong, Intu, Mudanjang, Sanrin, Raosimon, and Ranchao stores were selected for the survey. SPSS 12.0 and AMOS 7.0 were used as statistical tools, and exploratory factor analysis, confirmatory factor analysis, and multi-group analysis were conducted. In order to carry out a multi group analysis that decides whether the structure variables which shows the different effects of 6 service dimensions in Korean and Chinese groups is statistically valid, configural invariance, metric invariance, and structural invariance are tested in order. At the results of the tests, 3 out of 7 hypotheses were supported and other 4 hypotheses were denied. According to the study, 4 dimensions (Basic Benefit, Physical Environment, Policy, and additional convenience) were positively correlated with CS in Korea, and 3 dimensions (i.e. basic benefit, policy, additional convenience) were significant in China. However, the significance of the service-dimensions was turned out to be partially different in Korea and China. The Basic Benefit is more influential in deciding the level of CS in china than Korea, however Physical Aspect is more important factor in Korea. 'Policy dimension' did not make significant difference between two countries. In the 'additional convenience dimension', the differences in 'socio-economic factors' than in'cultural background' were considered as more important in Chinese consumers than Korean. Overall, the improvement of Service quality will be crucial factors to increase the level of CS in Chinese market same as Korean market. In addition, more emphases need to be placed on the service qualities of 'Basic Benefit' and 'additional convenience' dimensions in China. In particular, 'low price' and 'product diversity' that constitute 'Basic Benefit' are proved to be comparatively disadvantageous and weak points of Korean companies compared to global players, and thus the prompt strengthening those dimensions would be urgent for Korean retailers. Moreover, additional conveniences such as various tenants and complex service and entertaining area will be more important in China than in Korea. Besides, Applying advanced Korean Hypermaret`s customer policy to Chinese consumers will help to get higher reliability and to differentiate themselves to other competitors. However, as personal interaction, physical aspect, promotions were proved as not significant for the level of CS in China, Korean companies need to reconsider the priority order of resource allocations when they tap into Chinese market.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Asia pacific journal of information systems
• /
• 제20권1호
• /
• pp.141-170
• /
• 2010

User created content (UCC) is created and shared by common users on line. From the user's perspective, the increase of UCCs has led to an expansion of alternative means of communications, while from the business perspective UCCs have formed an environment in which an abundant amount of new contents can be produced. Despite outward quantitative growth, however, many aspects of UCCs do not meet the expectations of general users in terms of quality, and this can be observed through pirated contents and user-copied contents. The purpose of this research is to investigate effective methods for fostering production of creative user-generated content. This study proposes two core elements, namely, reward and motivation, which are believed to enhance content creativity as well as the mediating factor and users' committement, which will be effective for bridging the increasing motivation and content creativity. Based on this perspective, this research takes an in-depth look at issues related to constructing the dimensions of reward and motivation in UCC services for creative content product, which are identified in three phases. First, three dimensions of rewards have been proposed: task dimension, social dimension, and organizational dimention. The task dimension rewards are related to the inherent characteristics of a task such as writing blog articles and pasting photos. Four concrete ways of providing task-related rewards in UCC environments are suggested in this study, which include skill variety, task significance, task identity, and autonomy. The social dimensioni rewards are related to the connected relationships among users. The organizational dimension consists of monetary payoff and recognition from others. Second, the two types of motivations are suggested to be affected by the diverse rewards schemes: intrinsic motivation and extrinsic motivation. Intrinsic motivation occurs when people create new UCC contents for its' own sake, whereas extrinsic motivation occurs when people create new contents for other purposes such as fame and money. Third, commitments are suggested to work as important mediating variables between motivation and content creativity. We believe commitments are especially important in online environments because they have been found to exert stronger impacts on the Internet users than other relevant factors do. Two types of commitments are suggested in this study: emotional commitment and continuity commitment. Finally, content creativity is proposed as the final dependent variable in this study. We provide a systematic method to measure the creativity of UCC content based on the prior studies in creativity measurement. The method includes expert evaluation of blog pages posted by the Internet users. In order to test the theoretical model of our study, 133 active blog users were recruited to participate in a group discussion as well as a survey. They were asked to fill out a questionnaire on their commitment, motivation and rewards of creating UCC contents. At the same time, their creativity was measured by independent experts using Torrance Tests of Creative Thinking. Finally, two independent users visited the study participants' blog pages and evaluated their content creativity using the Creative Products Semantic Scale. All the data were compiled and analyzed through structural equation modeling. We first conducted a confirmatory factor analysis to validate the measurement model of our research. It was found that measures used in our study satisfied the requirement of reliability, convergent validity as well as discriminant validity. Given the fact that our measurement model is valid and reliable, we proceeded to conduct a structural model analysis. The results indicated that all the variables in our model had higher than necessary explanatory powers in terms of R-square values. The study results identified several important reward shemes. First of all, skill variety, task importance, task identity, and automony were all found to have significant influences on the intrinsic motivation of creating UCC contents. Also, the relationship with other users was found to have strong influences upon both intrinsic and extrinsic motivation. Finally, the opportunity to get recognition for their UCC work was found to have a significant impact on the extrinsic motivation of UCC users. However, different from our expectation, monetary compensation was found not to have a significant impact on the extrinsic motivation. It was also found that commitment was an important mediating factor in UCC environment between motivation and content creativity. A more fully mediating model was found to have the highest explanation power compared to no-mediation or partially mediated models. This paper ends with implications of the study results. First, from the theoretical perspective this study proposes and empirically validates the commitment as an important mediating factor between motivation and content creativity. This result reflects the characteristics of online environment in which the UCC creation activities occur voluntarily. Second, from the practical perspective this study proposes several concrete reward factors that are germane to the UCC environment, and their effectiveness to the content creativity is estimated. In addition to the quantitive results of relative importance of the reward factrs, this study also proposes concrete ways to provide the rewards in the UCC environment based on the FGI data that are collected after our participants finish asnwering survey questions. Finally, from the methodological perspective, this study suggests and implements a way to measure the UCC content creativity independently from the content generators' creativity, which can be used later by future research on UCC creativity. In sum, this study proposes and validates important reward features and their relations to the motivation, commitment, and the content creativity in UCC environment, which is believed to be one of the most important factors for the success of UCC and Web 2.0. As such, this study can provide significant theoretical as well as practical bases for fostering creativity in UCC contents.