• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.52-55
• /
• 2006

The OLEDs(Organic Light-Emitting Diodes) structure organizes the bottom layer using glass, ITO(indium thin oxide), hole injection layer, hole transport layer, emitting material layer, electron transport layer, electron injection layer and cathode using metal. OLED has various advantages. OLEDs research has been divided into structural side and emitting material side. The amount of emitting light and luminescence efficiency has been improved by continuing effort for emitting material layer. The emitting light mechanism of OLEDs consists of electrons and holes injected from cathode and anode recombination in emitting material layer. The mobilities of injected electrons and holes are different. The mobility of holes is faster than that of electrons. In order to get high luminescence efficiency by recombine electrons and holes, the balance of their mobility must be set. The more complex thin film structure of OLED becomes, the more understanding about physical phenomenon in each interface is needed. This paper observed what the thickness change of hole transport layer has an affection through the below experiments. Moreover, this paper uses numerical analysis about carrier transport layer thickness change on the basis of these experimental results that agree with simulation results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.46-47
• /
• 2008

Organic light-emitting diode is quick response speed, low power consumption and the self-interest has many advantages, such as insanity. So, organic light-emitting diode mechanism of light-emitting diode in order to more clearly understand the changes in the thickness of emitting materials for OLED characteristics of the simulation. emitting layer to a thickness of 10 [nm] ~ 100 [nm] changed the experiment, and hole transport layer 190 [nm] as a fixed. and emitting layer 10 [nm] ~ 100 [nm] to change the simulation results. Changes in the thickness of emitting layer gradually increased. depending on the emitting was 20 [nm] in the high 441 [lm / W] shows. and was gradually reduced. emitting layer 190 [nm] when fixed, hole transport layer, depending on changes in the thickness of 70 [nm] in the efficiency maximum value of 477 [lm / W], and was gradually reduced.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.853-858
• /
• 2008

The structure of organic light-emitting diodes(OLEDs) with typical heterostructure consists of anode, hole injection layer, hole transport layer, light-emitting layer, electron transport layer, electron injection layer, and cathode. 4,4bis[N-(1-napthyl)-N-phenyl-amino]-biphenyl(NPB) used as a hole transport layer and 4'4-bis(2,2'-diphenyl vinyl)-1,1'-biphenyl(DPVBi) used as a blue light emitting layer were graded-mixed at selected ratio. Interface at heterojunction between the hole transport layer and the elecrtron transport layer restricts carrier's transfer. Mixing of the hole transport layer and the emitting layer reduces abrupt interface between the hole transport layer and the electron transport layer. The operating voltage of OLED devices with graded mixed-layer structure is 2.8 V at 1 $cd/m^2$ which is significantly lower than that of OLED device with typical heterostructure. The luminance of OLED devices with graded mixed-layer structure is 21,000 $cd/m^2$ , which is much higher than that of OLED device with typical heterostructure. This indicates that the graded mixed-layer enhances the movement of carriers by reducing the discontinuity of highest occupied molecular orbital(HOMO) of the interface between hole transport layer and emitting layer.

• 한국산업정보학회논문지
• /
• 제10권2호
• /
• pp.76-81
• /
• 2005

본 연구에서는 차세대 디스플레이 소자로 각광을 받고 있는 유기발광 소자의 전기적인 특성을 해석적으로 접근하였다. 기본적인 OLED의 동작 메카니즘은 일함수(work function)가 낮은 음극(cathode) 전극으로부터 주입된 전자(electron)와 양극(anode) 전극으로 주입된 정공(hole)이 수송층을 지나 발광층으로 유입되어 여기상태(exciton state)를 거치며 재결합함으로써 발광되는 것으로 알려져 있다. 따라서 음극과 양극을 통해 들어오는 수송자(carrier)들이 원활한 전자-정공 쌍(electron - hole pair)을 이루기 위해 다층 박막 구조로 소자를 제작하여 높은 에너지 장벽을 완만하게 만들고 또한 박막의 두께를 조절하여 정공과 전자의 이동도 밸런스(balance)를 맞추어 수송자-전자와 정공-들이 수송층(CTL : carrier transport layer)을 통해 발광층(EML : emitting material layer)으로 주입을 용이하게 만든다 따라서 본 논문에서는 유기 발광소자의 최적의 발광특성을 얻기 위해서는 수치 해석을 통한 가장 높은 발광 효율을 가지게되는 박막의 두께를 예측하고 예측된 유기발광소자의 수치해석 값이 실제 제작된 소자의 특성 값과 일치하여 타당성이 있음을 증명하고자 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.31-32
• /
• 2008

The structure of OLEDs with conventional heterostructure consists of anode, hole injection layer, hole transport layer, light-emitting layer, electron transport layer, electron injection layer, and cathode. NPB used as a hole transport layer and DPVBi used as a blue light emitting layer were graded-mixed at selected ratio. Interface at heterojunction between the hole transport layer and the elecrtron transport layer restricts device's stability. Mixing of the hole transport layerand the emitting layer removes abrupt interface between the hole transport. layer and the electron transport layer. The stability of OLED with graded mixed-layer developed in this study was improved.

• ETRI Journal
• /
• 제45권6호
• /
• pp.1056-1064
• /
• 2023

The optical properties of the materials composing organic light-emitting diodes (OLEDs) are considered when designing the optical structure of OLEDs. Optical design is related to the optical properties, such as the efficiency, emission spectra, and color coordinates of OLED devices because of the microcavity effect in top-emitting OLEDs. In this study, the properties of top-emitting blue OLEDs were optimized by adjusting the thicknesses of the thin metal layer and capping layer (CPL). Deep blue emission was achieved in an OLED structure with a second cavity length, even when the transmittance of the thin metal layer was high. The thin metal film thickness ranges applicable to OLEDs with a second microcavity structure are wide. Instead, the thickness of the thin metal layer determines the optimized thickness of the CPL for high efficiency. A thinner metal layer means that higher efficiency can be obtained in OLED devices with a second microcavity structure. In addition, OLEDs with a thinner metal layer showed less color change as a function of the viewing angle.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.265-268
• /
• 1997

Electroluminescent(EL) devices are constructed using multilayer organic thin film. A cell structure of glass substrate/Indium-Tinoxide/TPD as a hole transporting layer/Alq3+Rhodamine 101 perchrolate(Red3) as an emitting layer/Alq3 as an electrron transporting layer/Al as an electrode was employed. Optimal thickness of emitting layer in EL cell was performed from the viewpoint of the electronics properties of emitting layers. The general vapor-deposition method was used to control the thickness of omitting layer in EL devices and electro-optical characteristics were measured. It is clarified that controlling thickness of emitting layer in vapor-deposition film had an effect on the change of carrier injection and EL spectrum. The intensity of red omission with luminance of 81cd/$m^2$ was achived at 11V driving voltage. The surface morphology of emitting layer in EL devices was investigated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.53-56
• /
• 2002

The effect of $\alpha$-septithiophene (${\alpha}-7T$) layers on the organic light emitting diode(OLED) was studied. The ${\alpha}-7T$ was used for a buffer layer in OLED. Hole injection was investigated and improved emission efficiency. The OLEDs structure can be described as indium tin oxide(ITO)/ buffer layer / hole transporting layer / emitting layer / electron transporting layer / LiF / Al. The hole transporting layer were composed of N,N-diphenyl-N,N-di(3-methylphenyl)-1,1-biphenyl-4,4-diamine(TPD), and N,N-di(naphthalene-1-ly)-N,N-diphenyl-benzidine( ${\alpha}$-NPD). The emitting layer, and electron transporting layer consist of tris(8-hydroxyquinolinato) aluminum($Alq_3$). All organic layer were deposited at a background pressure of less than $10^{-6}$ torr using ultra high vacuum (UHV) system. The ${\alpha}-7T$ layer can substitute the hole blocking layer, and improve hole injection properties.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.837-840
• /
• 2014

Novel materials of $Zn(HPB)_2$ and Ir-complexes were respectively synthesized as blue or red emitting material. White Organic Light Emitting Diodes (OLED) were fabricated by using $Zn(HPB)_2$ for a blue emitting layer, Ir-complexes for a red emitting layer and $Alq_3$ for a green emitting layer. White OLED was fabricated by using double emitting layers of $Zn(HPB)_2$ and $Alq_3:Ir$-complexes, and hole blocking layer of BCP. We also varied the thickness of BCP. When the thickness of BCP layer was 5 nm, white emission was achieved. We obtained a maximum luminance of $3,500cd/m^2$. The CIE coordinates was (0.375, 0.331). From this study, we could propose that the hybrid structure is efficient in lighting application of white OLED by improvement of color purity.

• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.850-853
• /
• 2009

We have optimized the device structure by using the dielectric layer such as anti-reflection thin film to improve the emitting efficiency of white organic light emitting device (WOLED). Basically, dielectric layer with anti-reflection characteristics can enhance the emitting efficiency of WOLED by compensating the refractive index of organic layer, ITO, and Glass. Here, WOLED was designed and optimized by Macleod simulator. The refractive index of 1.74 was calculated for Dielectric layer and was selected as $TiO_2$. The optimal thicknesses of $TiO_2$ and ITO were 119.3 and 166.6 nm, respectively, at the wavelength of 600 nm. The transmittance of ITO was measured with the thickness variation of dielectric layer and ITO in Organic layer/ITO/Dielectric layer structure. The transmittance of ITO was 95.17% and thicknesses of $TiO_2$ and ITO were 119.3 and 166.6 nm, respectively. This result, calculated and measured values were coincided.