• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.5-6
• /
• 2011

CO₂ reduction is the most urgent issue the world is facing. So, there should be a measure to reduce the CO₂ emission in construction industry which has more released CO₂ gas than other industries. CO₂ emission of building depend on using energy. Then efficient energy use process working efficiently at CO₂ reduction. Therefore In this study, author find the technical possibility of saving the building energy using the PCM which is able to control heat, storage heat and potential heat. So, it considered that apply to floor heating type which is major heating system of living space in Korea. And evaluate the Using possibility.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.143-148
• /
• 2010

In this study, the potential possibility of biodiesel fuel(BDF) and oxygenated fuel(ethylene glycolvmono-n-butyl ether; EGBE) was investigated as an effective method of decreasing the smoke emission. The smoke emission of blending fuel (BDF and EGBE 0~20 vol-%) was reduced in comparison with diesel fuel and it was reduced approximately 64% at 2000 rpm, full load in the 20% of blending rate. But torque and brake specific energy consumption( BSEC) didn't have no large differences. Also, the effects of exhaust gas recirculation(EGR) for the reduction of NOx emission has been investigated. Consequently, It was found that simultaneous reduction of smoke and NOx emission was achieved with BDF(90 vol-%) and EGBE(10 vol-%) blended fuel and cooled EGR method(5~10%).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.5
• /
• pp.36-46
• /
• 2000

The performance improvement and emission reduction in a turbocharged D.I. diesel engine was studied experimentally in this paper. The system of intake port, fuel injection and turbochager are very important factors which have influence on the engine performance and exhaust emission because the properties in the injected fuel depend on the combustion characteristics. Through these experiments it can be expected to meet performance and emission by optimizing the main parameters; the swirl ratio of intake port, fuel injection system and turbocharger. The swirl ratio of intake port was modified by hand-working and measured by impulse swirl meter. Through this steady flow test, we knew that the increase of swirl ratio is decreasing the mean flow coefficient, whereas the gulf factor is increasing. And the optimum results of engine performance and emission are as follows; the swirl ratio is 2.43, injection timing is BTDC 13。 CA, compression ratio is 16, combustion bowl is re-entrant 5$^{\circ}$, nozzle hole diameter is $\Phi$0.28＊6, turbocharger is GT40 model which are compressor A/R 0.58 AND turbine A/R 1.19.

• Korea Trade Review
• /
• v.47 no.3
• /
• pp.157-175
• /
• 2022

This study calculates agglomeration indices of manufacturing specialization and diversification in different regions of South Korea. Two types of agglomeration indices are introduced into the spatial durbin model (SDM) to analyzes the effects of manufacturing agglomeration in Korea on CO₂ emission intensity. The subjects of this study are 17 regions of South Korea , and the research period is from 2013 to 2019. This study also uses partial differential to analyze the direct and spillover effect of specialization and diversification agglomeration on CO₂ emission intensity. From the perspective of direct effect, the results reveal that specialization agglomeration is an important factor contributing to Korea's CO₂ emissions. However, diversification agglomeration has an obvious CO₂ emission reduction effect. From the perspective of spillover effect, this study finds that specialization agglomeration in one region can also contribute to CO₂ emissions in nearby regions. However, the development of diversification agglomeration in one region can have CO₂ emission reduction spillover effect on neighboring regions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.43-45
• /
• 2012

As a part of recent CO₂ emission reduction studies in the concrete industry with active use of concrete admixtures with low basic unit of CO₂ emission such as blast furnace slag (BFS), basic unit of CO₂ emission by SBFS was computed in order to assess CO₂ emission by reinforced concrete building with smart blast furnace slag (SBFS). In addition, SBFS concrete was applied to the subject building for assessment of CO₂ emission during material production step among construction steps. Life cycle CO₂ emission assessment on the subject building was classified into 7cases according to mix ratio of BFS and SBFS.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.266-268
• /
• 2004

This paper presents the greenhouse gas emission trading scheme which is under progress as a pilot project at the power sector in preparation for UNFCCC. By referring UK's, Emission Trading is introduced incentive auction to maximize the reduction of greenhouse gas emission. At the 1st step, from year 2006 to 2008, only CO2 is regarded as an objective target to decrease but emission credit is excluded with an assumption and only 5 Generation company take part in as participants. The market operating procedure is composed of participants' registration, baseline verification, incentive auction, the registration of initial and yearly allocation, emission trading, yearly emission verification & approval, yearly obligation conformity, carry forward & incentive grant. It can be serve a guideline the whole aspects of emission trading which will start in 2006 including operation, verification and profit sharing.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.408-412
• /
• 2012

Recently, new climate change mechanism after 2020 year has been accepted with the parties, and so government is pushing ahead the GHG reduction policies to achieve the effective results. Especially, it is essential to enhance the role of railroad in the public traffic system as well as to develop new cars with high energy efficiency for the GHG reduction of transportation sector. Thus, the calculation method of GHG emission of railroad should be established to manage the emission continuously. In this study, the calculation method of GHG emission of railroad was defined with Tier level considering its emission sources to refer to 2006 IPCC guideline for national GHG inventories. Also, the GHG emission of railroad at Tier 1 level was investigated using the activity data related to the amount of diesel and electricity consumption from 2008 to 2010. As a result, total GHG emission in 2010 was about 2,060 thousands ton CO2e, which have 73% of electricity and 27% of diesel. In future, the plans on the GHG reduction of railroad will be accomplished by the analysis of the detailed trends on the basis of the emission management of Tier 3 level under operating patterns. Therefore, it is important to develop the specific GHG emission factors of railroad in advance.

• Journal of Climate Change Research
• /
• v.4 no.3
• /
• pp.291-303
• /
• 2013

After establishing national greenhouse gas emission reduction goals, the South Korean government has been pursuing sector- and industry-specific greenhouse gas emission reduction measures; in support of which, metropolitan city / state governing entities, such as Gyeonggi Province, etc., have been in lock steps by establishing and executing climate change measures that are appropriate for the regional characteristics. However, in the case of local governments, difficulties abound due to the fact that the per-unit greenhouse gas emission amounts and the future emission estimates for establishing reduction targets are not clear. In order to establish correct climate change measure policies, the policy directions and the assessment of verified greenhouse gas emission amounts would need to serve as the basis, and along with the national level climate change effect and vulnerability assessment, there's a need to develop methodologies that take into consideration the local characteristics and conditions. To this end, this study calculated the greenhouse gas emission amounts of the City of Siheung, a basic local government in Gyeonggi Province, by using the GEBT (Greenhouse gas Emission Business-as-usual Tool) developed by the National Institute of Environmental Research to facilitate easy calculations of BAU (business-as-usual) emission quantities by local governing entities.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1315-1319
• /
• 2011

As government's policy is enacted to reduce greenhouse gas emission in transportation sector, railroad sector has to estimate amount of emission and propose feasible methods to reduce emission. To calculate accurate emission of railroad sector, we performed a study on the calculation model development for Tier 3 GHG emission factors. According to IPCC guide line, Tier 3 emission factor reflects individual characteristic of diesel locomotive. For this reason, we estimated GHG emission factor by stratified diesel locomotive and the result show difference of emission factor by notch changing. Therefore, the analysis of notch frequency during operation is required to develop Tier 3 emission factor, and we analysed a running pattern of diesel locomotive. As a result, idle and 8 notch consist about 70% of total running distance. In conclusion, the calculation model suppose that Tier 3 GHG emission factor is the sum of multiplied emission factor by weights in each notch. This result can contribute to Tier 3 emission factor calculation and reduction method development of emission in railroad sector by managing driving efficiency and technology development.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.3
• /
• pp.437-445
• /
• 2016

This paper discussed the effect of ammonia concentration adsorbed on fly ash for the ammonia emission as AAFA (Ammonia Adsorbed Fly Ash) produced from coal fired plants due to operation of NOx reduction technologies was landfilled with distilled or sea water at closed and open systems, respectively. Ammonia bisulfate and sulfates adsorbed on fly ash is highly water soluble. The pH of ammonium bisulfate and sulfate solution had significant effect on ammonia odor emission. The effect of temperature on ammonia odor emission from mixture was less than pH, the rate of ammonia emission increased with increased temperature when the pH conditions were kept at constant. Since AAFA increases the pH of solution substantially, $NH_3$ in the ash can release the ammonia order unless it is present at low concentration. $NH_4{^+}$ ion is unstable in fly ash and water mixtures of high pH at open system, which is changed to nitrite or nitrate and then released as ammonia gas. The proper conditions for < 20 ppm of ammonia concentration released from the AAFAs landfilled in ash pond were explored using an open system with sea water. It was therefore proposed that optimal operation to collect AAFA of less than 168 ppm ammonia at the electrostatic precipitator were controlled to ammonia slip with less than 5 ppm at SCR/SNCR installations, and, ammonia odor released from mixture of fly ash of 168 ppm ammonia with sea water under open system has about 20 ppm.