• 한국분말재료학회지
• /
• 제17권3호
• /
• pp.223-229
• /
• 2010

Iron(Fe)-Molybdenum(Mo) alloyed nanoparticles and nanowires were produced by the chemical vapor condensation(CVC) process using the pyrolysis of iron pentacarbonyl($Fe(CO)_5$) and Molybdenum hexacarbonyl($Mo(CO)_6$). The influence of CVC parameter on the formation of nanoparticle, nanowire and size control was studied. The size of Fe-Mo alloyed nanoparticles can be controlled by quantity of gas flow. Also, Fe-Mo alloyed nanowires were produced by control of the work chamber pressure. Moreover, we investigated close correlation of size and morphology of Fe-Mo nanoparticles and nanowires with atomic quantity of inflow precursor into the electric furnace as the quantitative analysis. Obtained nanoparticles and nanowires were investigated by field emission scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction.

• KIEAE Journal
• /
• 제10권1호
• /
• pp.19-24
• /
• 2010

Modern people are spending most of time in interior area. Indoor air environmental problem is one of the most effective factors influenceable to human health. Furthermore, saving energy and making ventilation system for pleasant indoor environment are necessary when it is faced shortage of energy over the world. In our country's case, it is already imposed that required quantity of air ventilation in buildings is 0.7 times per hour on "The regulation on building engineering system". As on the rise of the interests about Indoor air environment, Heat and Carbon dioxide emissions from User's metabolism, activity, furniture, and construction materials etc. could be the causes of Indoor air pollution. If these materials stays in Indoor air for so long, it could directly influence the user's health condition with a disease. As of building's sterilization improved that raised more mechanical ventilation. It also leads much energy waste in a period of high price of fossil fuel. Therefore, the way that saves energy and effective control of indoor ventilation is urgently needed. So, this study places the purpose on validating volume of indoor ventilation and user's comfortable degree by comparison CO2 emission rate through changing floor temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.247-250
• /
• 2001

We studied optical properties of SiON thin-film in the applications of optical waveguide. SiON thin-film was grown in 300$^{\circ}C$ by PECVD(plasma enhanced chemical vapor deposition) system. The change of SiON thin-film composition and refractive Index was studied as a function of varying NH$_3$ gas flow rate. As NH$_3$ gas flow rate was increased, Quantity of N and refractive index were increased at the same time. By the results, we could form the SiON thin-film to use of a waveguide with refractive index of 1.6. We analyzed the conditions of the thin-film with FTIR(fourier transform infrared) and OES(optical emission spectroscopy). N-H bonding(3390cm$\^$-1/) can be removed by thermal annealing. And we could observe the SiH bonding state and quantity by OES analysis in SiH$_4$

• 한국분무공학회지
• /
• 제28권4호
• /
• pp.169-175
• /
• 2023

Multi-injection scheme is being applied to GDI combustion to reduce PM and PN emission to meet the EU7 regulation. However, very short injection duration encounters the ballistic injection region, which injection quantity does not increase linearly with injection duration when applying multi-injection. In this study, numerical studies were conducted to reveal the cause of ballistic injection and the effect of design parameters on ballistic region using 1-D simulation, AMESim. Injection rate and injection quantity were compared with experiment to validate the established model, which showed the accuracy with 10% error. The model revealed that the tendency of ballistic region coincides with the needle motion behavior, which means that parameters at the upper part of needle such as electro-magnetic force, needle spring force and needle friction force have dominant effect on ballistic injection. To figure out the effect of electro-magnetic and needle friction force on ballistic, those parameters were varied to plus and minus 10% with model. The result showed that those parameters clearly changed the ballistic region characteristics, however, the impact became insignificant for outside of ballistic region, which means that the ballistic injection is mainly influenced by initial motion of injector needle.

• 한국측량학회지
• /
• 제29권2호
• /
• pp.183-191
• /
• 2011

이 연구의 목적은 GIS를 이용하여 기후변화에 대응하고 도시의 온실가스를 효율적으로 관리하기 위한 도시지역의 기후지도 제작방안에 대하여 연구하는데 있다. GIS를 이용한 도시기후지도 제작을 위하여 기후변화와 관련된 온실가스 통계자료와 공간자료를 수집 및 분석하고, 도시기후지도 제작 방안 정립, 도시기후지도 작성을 위한 GIS 프레임웍 데이터 구축방안수립, 시범지역에 대한 도시기후지도 작성 및 분석 등을 통하여 도시기후톱 유형과 도시 기후변화와의 상관관계를 분석하였다. 도시기후지도 작성을 통해 도시기후톱 유형별로 정확한 온실가스 배출량 및 흡수량을 산정 할 수 있음을 알 수 있었으며, 가정지역, 상업지역, 산업지역에서의 기온이 높은 것을 알 수 있었으며, 교통지역과 산업지역에서 단위면적당 배출량이 높은 것을 알 수 있다. 도시기후톱 유형별 도시기후 변화를 제시함으로써 도시개발에 따른 기후변화 영향을 제시하고, 기후변화 대응 및 적응을 위한 도시지역의 에너지 절감 및 온실가스 저감 정책 수립에 활용 될 수 있을 것으로 판단된다.

• 대한지리학회지
• /
• 제50권3호
• /
• pp.277-287
• /
• 2015

본 논문은 REDD(Reducing Emissions from Deforestation and forest Degradation, 개발도상국의 산림파괴 및 산림황폐화 방지를 통한 온실가스 감축) 기준선 설정시 토지이용변화 예측모형 적용의 한계점을 지적한다. REDD는 산림을 보호하는 대가로 탄소배출권을 생성하고 이를 거래하는 내용이 골자를 이루는 국제환경보전 정책이다. 탄소배출권의 규모는 기준선(reference level)에 근거해 정해지는데, '기준선'이란 산림파괴 패턴이 현상태 그대로 유지될 경우 미래에 발생할 탄소배출량을 의미한다. 본 논문에서는 토지이용변화 예측모형인 Geographic Emission Benchmark(GEB)와 GEOMOD의 모델링 결과를 비교하여 공간적 스케일이 변함에 따라 이들의 정확도가 어떻게 달라지는지를 분석하였다. 두 모형을 중국 운남성 시솽반나 열대림 사례에 적용한 결과, GEB가 상대적으로 양적 예측이 더 우수한 것으로 나타났고, GEOMOD는 위치적 예측이 더 정확한 것으로 밝혀졌다. 양적 예측은 몇 헥타르의 산림이 미래에 경작지로 개간이 될 것인가에 대한 결과를 의미하고, 위치적 예측은 그 개간이 어디에서 일어날 것인가에 대한 결과를 가리킨다. 또한, 위치적 예측이 다소 부정확하더라도 양적인 예측이 우수하면 전반적으로 특정 모형이 우수한 결과를 나타낼 수 있는 것으로 나타났다. 이는 REDD 기준선 설정시 양적 예측과 위치적 예측이 모두 중요한 만큼 다양한 조건 하에서의 정확도 변이를 고려하여 신중하게 토지이용변화 예측모형 적용해야지만 정확한 기준선을 설정할 수 있음을 시사한다.

• 한국자동차공학회논문집
• /
• 제23권4호
• /
• pp.444-453
• /
• 2015

In the previous study, several problems were observed in a NG conversion vehicle, which were fail of air-fuel ratio closed loop control, aggravated fuel economy, increased harmful emission and declined roadability. It was provisionally supposed that the mismatch of injection system with the engine caused these performance deterioration. In this context, the characteristics of fuel injection system of commercial conversion kit for NG were investigated experimentally varying the engine speed, fuel rail pressure and volume. The results are as follows; The injection quantity decreases as the engine speed increases due to the extremely small rail volume of the presenting system and flow rate of No. 2 injector are always lower than that of the other ones regardless of the speed under the dynamic operation condition. Furthermore the existing system does not meet the required fuel quantity for the normal engine operation over 3000 RPM. On the other hands, the large rail volume systems ease and/or eliminate the difference of injection quantity between the injectors according to the speed variation, however, these systems decrease injection flow rate and still cannot supply sufficient fuel. Finally, suitable combination of the higher rail pressure and the larger rail volume might be a solution about these problems.

• 자원ㆍ환경경제연구
• /
• 제14권1호
• /
• pp.135-166
• /
• 2005

본 연구의 목적은 한국의 24개 광업과 제조업종을 대상으로 1995~1999년간 통합된 오염원단위 지수와 변화지수를 제시하고 이를 통하여 환경성과를 측정하고자 함이다. 본 연구는 오염원단위의 새로운 정의와 통합된 오염원단위를 측정하는 새로운 기법을 제시한다. 광업과 제조업을 경공업, 중공업 그리고 중공업내 오염산업과 여타중공업으로 구분하고 실증적으로 통합원단위 지수와 변화지수를 계측한다. 통합오염원단위 지수 기준으로 중공업내 오염산업은 가장 오염집약적인 업종인 반면, 같은 중공업내 여타 중공업에 속한 업종은 가장 오염저감에 성공적이다. 통합오염원단위 변화지수를 기준으로 산업 전체의 평균치는 1,091로서 오염배출량변화지수가 1.133으로 연간 13.3% 증가한 반면 산출량변화지수는 1.039로 연간 3.9% 증가하여 약 9.1% 상승하였다. 경공업과 중공업의 통합원단위 변화지수는 각각 1.125와 1.042였고, 오염산업의 평균이 1.287로 가장 높았음에도 중공업의 평균이 낮았던 것은 역시 여타 중공업의 평균이 0.913으로 연간 약 9% 가량 감소하였기 때문이다.

• 환경영향평가
• /
• 제17권5호
• /
• pp.321-330
• /
• 2008

Methane is a potent greenhouse gas and methane emissions from landfills have been linked to global warming. In this study, LandGEM (Landfill Gas Emission Model) was applied to predict landfill gas quantity over time, and then this result was compared with the data surveyed on the site, Cheongju Megalo Landfill. LandGEM allows the input of site-specific values for methane generation rate (k) and potential methane generation capacity $L_o$, but in this study, k value of 0.05/yr and $L_o$ value of $170m^3/Mg$ were considered to be most appropriate for reflecting non-arid temperate region conventional landfilling, Cheongju Megalo Landfill. High discrepancies between the surveyed data and the predicted data about landfill gas seems to be derived from insufficient compaction of daily soil-cover, inefficient recovery of landfill gas and banning of direct landfilling of food garbage waste in 2005. This study can be used for dissemination of information and increasing awareness about the benefits of recovering and utilizing LFG (landfill gas) and mitigating greenhouse gas emissions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.967-972
• /
• 2001

The emission of $NO_{x}$ during coal combustion is a major reason of environment impact. $NO_{x}$ is an acid rain precursor and participates in the generation of smog through ozone production. $NO_{x}$ can be divided into thermal $NO_{x}$, fuel $NO_{x}$ and prompt $NO_{x}$. Thermal $NO_{x}$ is formed in a highly temperature condition dependent. Fuel $NO_{x}$ is dependent on the local combustion characteristics and initial concentration of nitrogen bound compound, while prompt $NO_{x}$ is formed in a significant quantity in some combustion environments, such as low temperature and short residence times. This paper presents numerical simulation of the flow and combustion characteristics in the furnace of a tangential firing boiler of 500MW with burners installed at the every comer of the furnace. The purpose of this paper is to investigate the reduction of $NO_{x}$ emission in a 500MW pulverized coal tangential firing boiler with different OFA's and burner angles. Calculations with different air flow rates of over fired air(OFA) and burner angles are performed.