• Journal of Environmental Impact Assessment
• /
• v.16 no.4
• /
• pp.277-283
• /
• 2007

Since the Kyoto Protocol became into effect, Korea has been expected to be part of the Annex I countries performing the duty of GHG reduction in the phase of post-Kyoto. Therefore, it is necessary to develop emission factors appropriate to Korean circumstances. In order to develop emission factors this study utilized the CleanSYS, which is the real-time monitoring system for industrial smoke stacks to calculate the emission rate of $CO_2$ continuously. In this study, the main focus was on the power generation plants emitting the largest amount of $CO_2$ among the sectors of fossil fuel combustion. Also, an examination on the comparison of $CO_2$ emission was made among 3 generation plants using the different types of fuels such as bituminous coal and LNG; one for coal and others for LNG. The $CO_2$ concentration of the coal fired plant showed Ave. 13.85 %(10,384 ton/day). The LNG fired plants showed 3.16 %(1,031 ton/day) and 3.19 %(1,209 ton/day), respectably. Consequently, by calculating the emission factors using the above results, it was found that the bituminous coal fired power plant had the $CO_2$ emission factor average of 88,726 kg/TJ, and the LNG fired power plants had the $CO_2$ average emission factors of 56,971 kg/TJ and 55,012 kg/TJ respectably which were similar to the IPCC emission factor.

• Journal of Korean Society of societal Security
• /
• v.2 no.1
• /
• pp.65-74
• /
• 2009

In this study, the air pollution management system based GIS has been developed to estimate the emission rate and air pollution modeling of air pollutants, effectively. This system is able to estimate emission rate of air pollutant and to analyze the emission characteristics with high spatial and temporal resolution. air pollution modeling. The air pollution management system was applied to Gwangyang Bay including large industry complex with a large number of emission sources. The air pollution management system was constructed using the spatial database of emission sources in Gwangyang Bay. It was found that the estimated emission rates of air pollutants is similar to the emission characteristics in Gwangyang Bay. Also, the spatial distribution of pollutants was similar to the location of emission sources. The predicted results of air pollution model was showed a good correlation coefficient (0.75) for TSP. The air pollution management system is expected to be effective tool (database system (GIS)) for the management and the control of air pollution.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.185-194
• /
• 2014

Internal engine is the main power source of vehicle and is the main source of air pollution. To satisfy this getting rigorous emission regulation, it must be solved simultaneously the dilemma of reducing emission gas and increasing heat efficiency. Diesel engine is preferred compare with gasoline engine in aspect of energy consumption but it must be solved reducing the containing of NOx, CO and HC. In this study: 1. Looking for alternative of performance improvement of Exhaust Gas Recirculation(EGR) which is emission gas reduction system. 2. Reducing malfunction of controlling emission gas. 3. Made possible precision control.

• Advances in environmental research
• /
• v.9 no.2
• /
• pp.97-107
• /
• 2020

The indiscriminate growth in global population poses a threat to the world in handling and disposal of Municipal solid waste. Rapid urban growth increases the production, consumption and generation of Municipal solid waste which leads to a drastic change in the environment. The methane produced from the Municipal Solid waste accounts for up to 11% global anthropogenic emissions, which is a major cause for global warming. This study reports the methane emission estimation using IPCC default, TNO, LandGEM, EPER and close flux chamber from open dump yards at Perungudi and Kodungaiyur in Chennai, India. The result reveals that the methane emission using close flux chamber was in the range of 8.8 Gg/yr-11.3 Gg/yr and 6.1Gg/yr to 9.1 Gg/yr at Kodungaiyur and Perungudi dump yard respectively. The per capita waste generation was estimated based on waste generation and population. The waste generation potential was projected using linear regression model for the period 2017-2050. The trend of CH₄ emission in the actual field measurement were increased every year, similarly the emission trend also increased in IPCC default method (mass balance approach), EPER Germany (zero order decay model) where as TNO and Land GEM (first order decay model) were decreased. The present study reveals that Kodungaiyur dump yard is more vulnerable to methane emission compared to Perungudi dump yard and has more potential in waste to energy conversion mechanisms than compare to Perungudi dump yard.

• Journal of Environmental Impact Assessment
• /
• v.16 no.4
• /
• pp.301-310
• /
• 2007

For the improvement of air quality in the metropolitan area, Korea has enforced the air pollutant emission cap regulation from the 1st of July, 2007, and the companies that intend to install a new or an enlarged facility in the metropolitan area will be restricted. However, the current regulation on permission does not describe a standard of judgement distinctly. In this study, therefore, a method of permission on the installation of a new or an enlarged facility was developed by supplementing the law in force based on the foreign cases. To develop a specific permit regulation and procedure, the developed nations' cases such as US, Canada, EU were reviewed thoroughly. Also, an appropriate method was suggested to apply domestically for a new or an enlarged facility permit within the regulations of the metropolitan special law. The method consists of first, calculating the possible permit quantity from the difference between an estimated annual emission cap and the annual emission provided by the implementation plan in each region. Second, permitting a new or an enlarged facility construction within the difference of the emission between the regional emission cap and the implementation plan in 2014. Third, distributing emissions allowable to each performance year based on the regional emission cap and the implementation plan in 2014. Fourth, making use of the emission difference between the implementation plan and the performance result in each year. Considering the general domestic conditions, the convenience of the permit authority and permitted companies, the most reasonable method was to use the fourth. To enforce the suggested permit method in a more flexible way, parts of the related regulations need to be revised and continuous research and analysis on the results from the implemented system and on foreign cases is necessary to develop this method a suitable system for domestic conditions and to settle the air pollutant emission cap system.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.204-208
• /
• 2013

CO2 emission makes up more than 80% of whole green gas. Therefore CO2 is recognized as the main culprit of global warming. IPCC (Intergovernmental Panel on Climate Change) is advising the 3 methods measuring CO2 emission. TIER1 is measured CO2 emission by criteria the energy consumption, TIER2 measure by criteria the emission factor according to the emission control technique each kind of vehicle, TIER3 is measured by criteria the distance each kind of vehicle. Currently, the most of CO2 emission measurement is used by TIER1. But it is not standardized that CO2 emission measurement method have the factor as work condition each distance. Specially, it is not suggest that methodology has the condition changing load of equipment according to site condition and the same position work as construction equipment. So, this study is suggested the CO2 emission measurement methodology of construction equipment.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.40 no.1
• /
• pp.21-33
• /
• 2015

This paper develops an analytic model for minimizing the cost of distributing items by truck from one supplier to many customers under Milk run logistics strategy. The model derives formulas for not only inventory and transportation costs but also costs associated with carbon emission trading scheme. In addition, monetary investment for reducing carbon emissions is considered. We analyze how to determine optimal shipment size and carbon emission reduction investment. The purpose of this work is to evaluate the effects of carbon emission trading scheme on the Milk run logistics strategy in terms of how much to reduce carbon emissions and/or inventory and transportation costs. We analytically show that it is possible to reduce carbon emissions while reducing inventory and transportation costs by introducing cap-and-trade carbon emission trading scheme under certain conditions.

• Journal of Korean Society for Quality Management
• /
• v.17 no.1
• /
• pp.48-59
• /
• 1989

The motor vehicle emission is expected to be constrained strongly in the future in accordance with the current policy as to prevention of air pollution. This paper establishes a sequential rectifying inspection plan which satisfies the standard motor vehicle emission for the automobile producers who are currently producting the automobiles with catalytic converts. This plan also considered the constraint of the effective motor vehicle emission by way of rectifying the certification test in the past. In order to evaluate the performance of the inspection plan, the recent certification test data have also been applied. The result of the application has proved that the rectified sequential inspection plan presented in this paper satisfies the standard motor vehicle emission and can be the optimal economic inspection plan. As a result the inspection plan given in this paper will be contributed to constrain the motor vehicle emission most effectively.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.11
• /
• pp.7-18
• /
• 2020

Purpose: The Emission Trading Scheme (ETS), which enables structuring emission credits as a financial product, is taking a crucial position of global collaboration against climate change. Previous studies that have covered ETS subjects from the macro perspective contribute to facilitating legal enactment of this scheme. However, they have rarely addressed challenges aligned with issues arising from labor burdens for ETS works from the business perspective. Research Design, data and methodology: This study presents conceptual models that are expected to help design an electronic system. The study model contains four modules: emission allocation, data interface, reduction technology sharing, and emission trading. Two validation approaches, the Analytic Hierarchy Process (AHP) and regression analysis, are applied in confirming the feasibility of the proposed model. Results: This study suggests an IT system methodology to help improvement of the current K-ETS mechanism. In particular, this study addresses effectiveness for real businesses and the adaptability of this mechanism to other nations. Conclusions: The proposed IT platform diagram can contribute to successful operation of ETS by providing multiple benefits to participating companies through in-house allocation mechanisms, the soft-landing of ETS adoption to participating companies through reduction of technology-sharing, group purchases, and transaction costs through the trading system.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2058-2063
• /
• 2010

United Nations Framework Convention on Climate Change(UNFCCC) is one of the international environmental convention with the goal of stabilizing Greenhouse Gas(GHG) concent in the atmosphere and preventing potentially dangerous change in the earth's climate. The purpose of this convention is to reduce fossil fuel consumption and to prevent GHG emission. The Republic of Korea was one of the Annex-II parties submitted its national communication to the UNFCCC. As a developing county, there is no GHG emission reduction commitments made by South Korea during first commitment period(2008~2012). On the contrary, South Korea' status as an OECD member, joining in 1996, ranks 6th in GHG emission. Furthermore the rate of increase of GHG is first among OECD countries in year 2005. As a result, Korea will probably be incorporated into Annex-I in second commitment period (after 2013). So, Korea government established and announced Voluntary GHG Reduction scheme to reduce emissions of 4%(accounting for 30% reduction base on Business As Usual) from the 2005 level by the year 2020 for mitigation of reduction duty impact. In specific case of Korea, transportation section occupied almost 21% of total energy consumption and nearly 17% of total GHG emission at 2005, so systematic emission management is required. To do so, in this research, we focus on systematic way of GHG management system to handle GHG reduction duties in Railroad section.