• Journal of Climate Change Research
• /
• v.4 no.3
• /
• pp.201-210
• /
• 2013

In recent years, with the rising interest to reduce greenhouse gas emissions, the demand for using environmentally friendly product with low greenhouse gas emission is increasing in the printing industry as well. In this study, the carbon footprint of environmentally friendly product mineral paper that uses less plastic and wood than normal printing paper materials was analyzed by utilizing the life cycle assessment (LCA) technique. An analysis utilizing the LCA technique was done per the Korea carbon footprint certification guidelines and, for scope of study, it included the premanufacturing stage and manufacturing stage except for the use and disposal stages. As a result of the study, the emission coefficient of the mineral paper was calculated to be $0.81kg\;CO_2eq/kg$ and the emission from electricity usage of the entire greenhouse gas emission was calculated to be 45.85% ($0.37kg\;CO_2eq/kg$). In order to reduce greenhouse gas emission, required are the efforts to reduce the environmental loads by using energies that have relatively lower environmental loads, such as improvement in electricity usage efficiency and renewable energy, by increasing product completion rates during the manufacturing process of mineral paper.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.3
• /
• pp.64-73
• /
• 2013

The application of the Life Cycle Assessment (LCA) methodology to analyze the environmental impact to different swine waste treatment systems was investigated. The first part of LCA is to organize an inventory of parameters and emissions released due to the system under investigation. In the following step of the Life Cycle Impact Assessment, the inventory data were analyzed and aggregated in order to finally get one index representing the total environmental burden. For the Life Cycle Impact Assessment (LCIA) the Eco-indicator 95 method has been chosen because this is well documented and regularly applied impact method. Two different swine waste treatment systems such as aerobic and anaerobic digestion systems were chosen as an example for the life cycle impact analysis. For establishing the parameters to be assessed the agricultural environmental effects to above swine waste treatment systems, it has been observed that there was high at T-P emission in anaerobic digestion system and $CO_2$ emission in aerobic digestion system. For Eco-indicator values per environmental effect for swine waste treatment systems related to one tonne of swine waste, it was shown that there was a negative index for global warm potential and soil acidification in aerobic digestion system, but relatively high positive index for eutrophication in anaerobic digestion system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.500-507
• /
• 2010

Regard to the global warming, the shipping industries are progressed the dedicated endeavor to reduce greenhouse gas. As the study results of 2009 GHG study team, the $CO_2$ emission of shipping industries exceeded slightly 1.0 billion ton during one year(2007) and it is 3.3% of total $CO_2$ amount exhausted from all industries. This paper are introduced the energy efficiency design index / operation indicator monitoring system(EDiMS) which matched with EVAMOS software released by the dynamics laboratory of Mokpo maritime university. EDiMS can continuously be monitored amounts of $CO_2$, NOx, SOx, and PM emitted from ship and it can be applied as the useful tool of the inventory work of air pollution and the ship energy management plan for the mitigation or reduction of ship emission.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.31-36
• /
• 2010

SAI(Secondary Air Injection) system has been studied widely as one of the promising countermeasure for reducing HC emission at cold start. In this paper, in order to find out the optimal position of SAI, computational thermal fluid analysis on exhaust system adapted SAI system is performed using commercial 3-D CFD code, CFX. The present results showed that SAI position strongly affected the uniformity of air distribution in front of catalyst. And also through the decision process of optimal position of SAI, new index, uniformity of air distribution($U_{\phi}$) is proposed to define it quantitively. Because $U_{\phi}$ is very simple equation and similar with flow uniformity, it is very easy to figure out the physical meaning and to apply it to practices. Finally, we applied the index $U_{\phi}$ to the decision process of the optimal position of SAI, so that we could get the clear comparison results.

• KSTLE International Journal
• /
• v.8 no.1
• /
• pp.1-6
• /
• 2007

Chromatic device was developed using light emitting diodes, optic fibers and photodiodes. Chromatic ratio and total contamination parameters based on transmitted light intensity in Red, Green, and Blue wavelengths were used for oil chemical and particulate contamination assessment. Chromatic ratio criterion was found independent of the particulate contamination of oil; but depended on chemical degradation, being more sensitive for synthetic than mineral hydraulic oil. Total contamination index of the sensor depended on both the chemical degradation and particulate contamination of the oil; being most sensitive in blue wavelength, and least in the red. Test results for synthetic hydraulic oils monitored corroborated with results of other tests such as viscosity, total acid number, elemental optical emission spectroscopy, particulate counts and UV-VIS photospectrometry. Chromatic ratio showed a clearer indication of oil degradation, compared to key monitoring parameters such as total acid number, viscosity and particle counts. The results showed that these parameters are effective criteria for the condition monitoring of synthetic hydraulic oils.

• Journal of Information Display
• /
• v.11 no.3
• /
• pp.123-127
• /
• 2010

Fluorescent white organic light-emitting diodes showing high color-rendering indices (CRIs) of up to 81 was demonstrated, with a silicon-cored anthracene derivative (PATSPA) doped with DPAVBi utilized as the deep-blue host and dye materials, and the commercial dyes rubrene and DCM2 utilized as the orange- and red-light-emitting dyes. The devices, consisting of three emissive layers, showed bright-white-light emission, but the ratio of the blue peak to the orange and red peaks changed with the current density and the thickness of the blue emissive layer. A high CRI was achieved with the use of a deep-blue emitter doped in a novel host and by optimizing the blue-layer thickness. The device with a blue-layer thickness of 10 nm showed the Commission Internationale de l'Eclairage (CIE) color coordinate of (0.33, 0.35), a high CRI of 81, and a moderate external quantum efficiency of 2% at a current density of $2.5\;mA/cm^2$.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.487-492
• /
• 1995

The chemical compositions and pyrolysis characteristics of oil shales and source rocks distributed in the southwestern and southeastern parts of the Korean peninsular have been investigated. In order to compare the results of Korean samples with those of shales giving high oil yields, two Colorado oil shale samples and one Paris source rock samples were also investigated. Chemical compositions of the samples were analysed by means of gravimetry, CHN analysis, X-ray diffraction method, inductively coupled plasma atomic emission spectrometry and atomic absorption spectrometry. A custom made pyrolyser and a Rock-Eval system were used for the pyrolysis studies. Pyrolyses of the samples were carried out by means of a temperature controlling device to $600^{\circ}C$ at a heating rate of $5^{\circ}C/min$ with a helium flow rate of $1200m{\ell}/min$. The results of pyrolysis study indicated that Colorado shale samples belong to type I and all the other samples belong to type II.

• Korean Journal of Ecology and Environment
• /
• v.45 no.1
• /
• pp.42-51
• /
• 2012

This study investigated the characteristics of natural organic matter (NOM) with general water characteristics (pH, DO, electrical conductivity, BOD, COD, TN, TP, Chl-$a$, DOC, $UV_{254}$, SUVA) and the 3D fluorescence excitation-emission matrix (FEEM) in the Yeongsan River basin. FEEM was used to classify protein-like and fulvic & humiclike substances with fluorescence intensity in the matrix of excitation and emission wavelength. The concentration of BOD, COD, TN, electrical conductivity and DOC in the region of Gwangju city (Gwangju sewage treatment plant: GJS, Gwangjucheon: GJC, Gwangju 2: GJ2) was relatively higher than the upper reaches and lower reaches of the Yeongsan River basin. SUVA in most sites was lower than 3 L $mg^{-1}\;m^{-1}$ as the hydrophilic substances, except Damyang (DY) in the upper reaches of Yeongsan river was higher than 3 L $mg^{-1}\;m^{-1}$ as the hydrophobic substances during winter and autumn. In the FEEM investigation the fulvic and humic substances were found in most sites, and in sites regarding Gwangju city (GJS, GJC, GJ2) during winter and GJC in summer, protein-like substances were found. The trend of fluorescence intensities from the upper reaches to the lower reaches in most sites corresponded to that regarding the concentration of water characteristics (BOD, COD, TN, DOC). That is why the region of Gwangju city (GJS, GJC, GJ2) was relatively higher. This results were an equivalent trend to those of fluorescence index (FI) in most sites, and the higher FIs in the sites of Gwangju city indicate more microbial-derived substances due to enormous effluent organic matters (EfOM) from huge Gwangju sewage treatment plants.

• Journal of Technology Innovation
• /
• v.25 no.4
• /
• pp.263-284
• /
• 2017

The purpose of this research is to analyze the performance of national R&D projects and to find out measures to improve the performance indicators, focusing on energy HRD projects. The main analysis target is 86 energy manpower projects supported since 2010. The performance indicators of the energy HRD projects are related to the research capacity, the number of emission workers, industry-university linkage, job creation and so on, and analyzed by using the 11 indicators of human resource performance index called KPI index. As a result of analyzing the attainment level of the proposed target by task, the index with the highest achievement level is the corporation linkage rate, and the index with the lowest achievement level is the participating company employment. As a result of examining the effects of job creation in company - linked activities, it was found that the greater the number of participating companies in the business, the greater the employment creation effect of the number of internships. As a result of the above analysis, the following policy alternatives are proposed. First, it is necessary to consider adding indicators that can express the quality performance of the business and performance indicators that can express actual business linkages. Second, it is necessary to strengthen the management of differentiated performance indicators according to policy performance targets and major target groups. Third, it is necessary to improve information input and accumulation system along with improvement of performance index.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.5
• /
• pp.1-8
• /
• 2010

Recently subscribers in mobile communication services increase gradually, and the new multifunctional portable terminals can provide various functionalities. However this trend may not be desirable in Green IT respect because the emission of carbon dioxides emitted during operations of base station and mobile stations can cause significant effect on the emissions of carbon dioxides. In this paper the power saving scheme which can adjust slot index while the system is in a paging phase has been proposed and its performance has been evaluated. The slot cycle index can be adjusted according to individual user's property, its effect on the system performance has been investigated. In order to mitigate its adverse effect, power ramping scheme is considered and evaluated thereafter.