• 한국전기전자재료학회논문지
• /
• 제20권8호
• /
• pp.716-719
• /
• 2007

The effects of the evaporation rate of MgO films using an electron beam on the MgO properties and the discharge characteristics of a plasma display panel (PDP) were investigated and analyzed. MgO films were deposited with the various MgO evaporation rates. The MgO properties such as the crystal orientation, the surface roughness, and the film structure were inspected using XRD (X-ray diffraction), AFM (atomic force microscopy). From the experiments and Paschen law, the maximum value of the secondary electron emission coefficient $({\gamma})$ was obtained at the evaporation rate of $5{\AA}/sec$. The XRD results and cathode-luminescence (CL) spectra show the ${\gamma}$ values are correlated with F/F+ centers of the molecular structure of MgO films. The minimum firing voltage and the maximum luminous efficiency were obtained at an evaporation rate of $5{\AA}/sec$. In the MgO film deposited at $5{\AA}/sec$, the (200) orientation and F+ center were most intensive.

• 한국공작기계학회논문집
• /
• 제16권4호
• /
• pp.13-21
• /
• 2007

This paper presents characteristics of steady flow by variation of a combustion chamber and an intake port. Gas flow field inside a combustion chamber is the important factor in improving combustion stability and reduction of emission level. The flow characteristics such as flow coefficient, tumble ratio and swirl ratio are measured by the steady flow rig test with an impulse meter in this study. In the measuring, the valve lifts are varied between 1mm to 10mm. The three combustion chambers and two intake ports were applied to the steady flow apparatus in order to investigate the effect of swirl and tumble on the in-cylinder flow. As a result, tumble ratio were found to be different by variation of the combustion chambers and the intake ports. The data from the present study can be applied to design of a similar engine as basic data.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.284-287
• /
• 2013

In this work, we have fabricated TiC films by using unbalanced magnetron sputtering method with graphite and Ti targets for contact strip application of electric railway. TiC films were deposited with various substrate temperatures. We investigated various properties of TiC films prepared with various substrate temperatures, such as the hardness, surface roughness, friction coefficient, resistivity, FESEM (Field Emission Scanning Electron Microscopy), HRTEM (High Resolution Transmission Electron Microscopy) and XPS (X-ray Photoelectron Spectroscopy). The hardness and friction coefficient properties of TiC films were improved with increasing substrate temperature. These results indicate that the improvement of hardness and resistivity is related to the increase of sp2 clusters in TiC films. And also, the resistivity value of TiC films were decreased with increasing substrate temperature.

• Asian Journal of Atmospheric Environment
• /
• 제9권1호
• /
• pp.86-90
• /
• 2015

Temperature was considered to estimate the minimum detectable absorption coefficient of aerosol particles from photothermal spectroscopy. Light energy absorbed by subsequent emission from the aerosol results in the heating of the aerosol sample and consequently causes a temperature change as well as changes in thermodynamic parameters of the sample. This thermal effect is the basis of photothermal spectroscopy. Photothermal spectroscopy has several types of techniques depending on how the photothermal effects are detected. Photothermal interferometry traces the photothermal effect, refractive index, using an interferometer. Photoacoustic spectroscopy detects the photothermal effect, sound wave, using a microphone. In this study, it is suggested that the detection limit for photothermal spectroscopy can be influenced by the introduction of a slip correction factor when the light absorption is determined in a high temperature environment. The minimum detectable absorption coefficient depends on the density, the specific heat and the temperature, which are thermodynamic properties. Without considering the slip correction, when the temperature of the environment is 400 K, the minimum detectable absorption coefficient for photothermal interferometry increases approximately 0.3% compared to the case of 300 K. The minimum detectable absorption coefficient for photoacoustic spectroscopy decreases only 0.2% compared to the case of 300 K. Photothermal interferometry differs only 0.5% point from photoacoustic spectroscopy. Thus, it is believed that photothermal interferometry is reliably comparable to photoacoustic spectroscopy under 400 K.

• 대한전자공학회논문지
• /
• 제22권2호
• /
• pp.44-54
• /
• 1985

양전자 방출 CT에서는 고해상도를 얻기 위해서 즙은 폭의 검출기와 충분히 큰 검출효률이 동시에 요구된다. 검출기의 폭을 수 mm까지 줄이면 검출기준이 급감소하고 누설률이 급상승하여 이를 사용함이 인난하여진다. 특히 사각으로 입사하는 포톤의 경우 후각하다. 이를 해결하는 방법으로 쐐기형 검출기를 제안하였고 이에 관련된 문제들을 탐구하였다. 4∼8mm BGO 검출기의 쐐기형을 사용한 시스템이 종미 요육양체형을 사용한 시스템보다 해상도가 증가하였다. 예를들면 회 8mm의 BGO 검출기 200개를 난제하게 배치한 시스템이 이점 샘플링할 경우 쐐기형의 해상도가 5.4mm FWHM으로 같은 조건의 직육면체형의 6.6mm FWHM보다 향상됨을 시뮬레이션으로 확인하였다. 3∼7mm FWHM의 초고해상도 시스템의 검출기에 대하여 형태와 크기에 따른 특성도 시뮬레이션으로 구하여 제시하였다. The high resolution of positron emission tomography, in particular, requires the use of detector crystals of narrow width but still with sufficiently high detection efficiency. If the crystal width is reduced to several millimeters, degradation of detection efficiency and leakage coefficient becomes significant, particularly in case of obliquely incident photons. Alleviation of such a problem can be made possible by modification of the detector shape from the conventional rectangular type to a wed농e type. The Proposed wedge shape makes the absorption length longer for obliquely incident photons, thus increasing the detection efficiency and suppressing leakage coefficient. For the BGO detectors of 4-8mm width, the computer simulation result of the system using wedge detectors reveals resolution improvement to the system using conventional detectors. For the system composed of 200 BGO detectors of 8mm width with 2 point sampling motion, the simulation resolution system using conventional detectors. For the very high resolution system of 3-7mm FWHM, the characteristics of the detector shape and size is studied by computer simulation.

• 생물환경조절학회지
• /
• 제28권3호
• /
• pp.204-211
• /
• 2019

본 연구는 국내 온실의 환경설계 기준 설정에 필요한 기초자료 제공을 목적으로 온수난방 방식을 채택하고 있는 상업용 온실 2곳에서 난방 중 열환경 계측 실험을 실시하고, 온수난방 배관의 열전달 특성을 분석하여 난방배관의 단위길이 당 방열량 자료를 제시하였다. 실험 기간동안 두 온실의 평균기온은 각각 $16.3^{\circ}C$와 $14.6^{\circ}C$로 조절되었으며, 난방배관의 온수 온도는 평균 $52.3^{\circ}C$와 $45.0^{\circ}C$로 관측되었다. 실험결과 난방배관 표면의 자연대류열전달계수는 $5.71{\sim}7.49W/m^2^{\circ}C$의 범위로 분석되었다. 난방배관 내의 유속이 0.5m/s 이상일 때에는 관내의 수온과 관 외부의 표면온도 차이가 크지 않은 것으로 나타났다. 이를 바탕으로 난방배관의 관류열전달계수를 수평원통에서의 층류 자연대류열전달계수의 형태로 유도하였다. 유도된 관류열전달계수 식을 변형하여 관의 규격과 온수-실내공기의 온도차를 입력 변수로 하는 난방배관의 단위길이 당 방열량 산정식을 개발하였다. 본 연구 결과를 기존에 제공되고 있는 국내외 여러 자료와 비교한 결과 JGHA 자료와 가장 유사한 것으로 나타났다. 국내 온실의 설계에서 적용하고 있는 NAAS 자료와 국외의 BALLS 및 ASHRAE 자료는 값이 너무 큰 것으로 판단된다. 따라서 국내 온실의 환경설계기준을 제정하고, 고시하기 위해서는 추가적인 실험을 통해 이 부분에 대한 충분한 검토가 필요할 것으로 판단된다.

• 한국대기환경학회지
• /
• 제26권6호
• /
• pp.657-665
• /
• 2010

Carbon dioxide ($CO_2$) is known to be a major greenhouse gas partially emitted from waste combustion facilities. According to the greenhouse gas emission inventory in Korea, the quantity of the gas emitted from waste sector in 2005 represents approximately 2.5 percent of all domestic greenhouse gas emission. Currently, the emission rate of greenhouse gas from the waste sector is relatively constant partly because of both the reduced waste disposal in landfills and the increased amounts of waste materials for recycling. However, the greenhouse gas emission rate in waste sectors is anticipated to continually increase, mainly due to increased incineration of solid waste. The objective of this study was to analyze the property of Municipal Solid Waste (MSW) and estimate $CO_2$ emissions from domestic MSW incineration facilities. The $CO_2$ emission rates obtained from the facilities were surveyed, along with other two methods, including Tier 2a based on 2006 IPCC Guideline default emission factor and Tier 3 based on facility specific value. The $CO_2$ emission rates were calculated by using $CO_2$ concentrations and gas flows measured from the stacks. Other parameters such as waste composition, dry matter content, carbon content, oxidation coefficient of waste were included for the calculation. The $CO_2$ average emission rate by the Tier 2a was 34,545 ton/y, while Tier 3 was 31,066 ton/y. Based on this study, we conclude that Tier 2a was overestimated by 11.2 percent for the $CO_2$ emission observed by Tier 3. Further study is still needed to determine accurate $CO_2$ emission rates from municipal solid waste incineration facilities and other various combustion facilities by obtaining country-specific emission factor, rather than relying on IPCC default emission factor.

• 환경정책연구
• /
• 제6권4호
• /
• pp.55-81
• /
• 2007

CGE모형을 이용하여 우리나라를 포함한 OECD 국가와 중국, 브라질 등 18개 국가를 대상으로 다양한 비율의 $CO_2$ 저감량이 할당되는 경우 그에 따라 예상되는 국가별 GDP손실액을 추정하고 그 결과를 이용하여 각국의 $CO_2$ 저감에 따른 총비용곡선, 한계비용곡선, 평균비용곡선의 형태를 비교하였다. 대다수 국가의 총비용곡선, 한계비용곡선 그리고 평균비용곡선은 우상 향하는 형태를 나타내었으나 국가별로 실행가능한 저감영역이 다르고 또 각 함수의 기울기와 절편 등이 다르게 나타났다. 향후 post-kyoto 온실가스감축 의무부담방안 협상 시 온실가스 저감에 따른 각국의 GDP손실액 유형을 고려하여 우리나라와 비슷한 패턴을 가지고 있는 국가들과 공동으로 의무부담방안을 모색하는 것이 필요하다.

• 한국환경과학회지
• /
• 제14권6호
• /
• pp.543-553
• /
• 2005

In recent days, photochemical smog due to the rapid industry development and vehicle increasement has become a critical pollutant in the metropolitan area and the number of ozone alarm signal has increased every year. This research was performed to evaluate VOCs emission source characteristics and concentration of VOCs in Daegu. The site average concentration was observed in the following order: industrial area > commercial area > residential area. Most of the VOCs species except toluene showed variations with higher concentration during nighttime, and lower concentration during the daytime. The major VOCs of stationary emission source were BTEX(benzene, toluene, ethylbenzene. xylene) and methylene chloride, trichloroethene and styrene. Also, those of automobile exhaust were toluene and benzene. Also, the major VOCs concentration emited by the vehicle fuel was observed in the following order: gasoline > light oil > liquefied petroleum gas (L.P.G). Correlation coefficients values were estimated between major VOCs such as toluene, ethylbenzene, m,p-xylene, o-xylene. Results showed that correlation coefficient values were significant magnitude above 0.76. Also, there showed highly significant correlations among ethyl benzene, m,p-xylene, and o-xylene concentration(Pearson correlation coefficients, r=0.868-0.982). Calculated correlation coefficients among commercial area,industrial area and residential area were 0.934-0.981, they showed high correlation. There showed highly correlation between stationary emission source and industrial area, compared with commercial area and residential area. Also, calculated correlation coefficients among commercial area, industrial area, residential area and automobile exhaust were 0.732, 0.725, 0.777, respectively.

• 한국ITS학회 논문지
• /
• 제20권6호
• /
• pp.177-191
• /
• 2021

전 세계가 직면한 심각한 대기오염의 주요 원인 중 하나는 도로 이동원의 배출 가스이다. 차량 배출 가스 저감을 위해 여러 국가가 노력하고 있으며 서울시도 2030년까지 온실가스 배출 40% 감축 목표를 설정하여 활발한 배출 가스 감축 정책을 실시하고 있다. 이러한 정책의 시행을 위해서는 실질적인 정책적 지표가 필요하다. 국내 배출 가스량은 대부분 환경부 산하국립환경과학원의 속도 함수인 배출계수에 의해 산정되지만 동적 변수인 속도는 친환경차량목표 보급 대수 산정 지표로 활용하기에 한계가 있다. 따라서 본 연구는 서울시 자동차 등록정보와 한국교통안전공단 자동차 검사 정보를 활용하여 서울시 배출 가스량 원단위를 산정하였다. 차종, 연료, 주행거리 등 주요 변수에 따른 배출 가스 경향성을 파악하여 그룹화하고 자동차 검사에서 측정하는 일산화탄소, 탄화수소, 질소산화물, 매연을 기준으로 하였다. 그 결과 모델연도와 주행거리에 따라 배출 가스량 원단위가 유의미한 추세를 보였다. 이는 서울시 친환경 차량 전환 시 모델연도가 오래되고 주행거리가 긴 영업용 차량을 우선적으로 전환하기 위한 정책적 지표로 활용할 수 있을 것이다.