• Journal of Information Processing Systems
• /
• v.2 no.3 s.4
• /
• pp.143-146
• /
• 2006

We have designed an embedded controller for the control of a diesel generator using an embedded system. The generator is monitored and controlled remotely via the internet in real-time. The proposed digital controller is designed to handle precisely the distortions and noises of the signals emanating from the diesel generator, and enables abnormal operation of the diesel generator to be notified to the remote manager using the Short Message Service (SMS) of the Internet, which enables the appropriate personnel to take action by remote control according to the incoming messages.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1655-1658
• /
• 2004

In this paper, we design and implement remote servo motor control system with real-time micro embedded operating system. The system, where controller and camera image grabber are mounted, handles control commands transmitted from a remote PC web browser. A hard real-time servo motor driver running on the real-time micro embedded OS and then a digital control application which confirms precise sampling time intervals is constructed. Frame grabber images transmitted from camera are saved in a image data format to view on remote PC web browser.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.12
• /
• pp.1160-1166
• /
• 2007

This paper presents the design and implementation of an embedded image stabilization control system for a mobile phone with a built-in camera. Image stabilization is a family of techniques for reducing image blur resulting from minute camera shake due to hand-held shooting, thereby allowing the use of shutter speeds slower than values normally required to obtain sharp images. A mechanical image stabilizer mechanism developed for a camera mobile phone is introduced and a digital control system as a part of the image stabilization system is designed and implemented on an 8-bit microcontroller with integer arithmetic in C. This paper focuses primarily on issues that need to be taken into consideration for fixed-point implementation of the digital controller. Several experimental results are presented to demonstrate the performance of the implemented image stabilization control system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.4
• /
• pp.143-151
• /
• 2010

In this paper, We designed the robot controller with Linux OS, Cygwin under the Marvell Monahan PXA320 embedded platform. Cygwin is a collection of tools for using the Linux-like environment for commercially released x86 32 bit and 64 bit versions of Windows and is a DLL that acts as a Linux API emulation layer providing substantial Linux API functionality. TinyOS-2. x is a component based embedded OS by UC Berkeley and is an open-source OS designed for interfacing the sensor application with specific C-language. The results of experiment are described to show the improvement of sensor interfacing functionality under the PXA320 embedded RTOS platform.

• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.100-102
• /
• 2001

This paper resents digital controller of emergency power generator system. The controller offers an integrated alternative for Genset control, metering and remote monitoring. Proposed controller used 80c196kc one chip microprocessor for digital control, it measures parameters of generator and provides output signals to control starting and stopping of generator. Additionally protection and alarm functions are considered to system stability. As almost parts of controller are embedded by digital microprocessor and FPGA techniques, the controller has a more flexible feature and an improvement of precision. The developed system has a big merit economically and is suitable for any kW size generator.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1827-1834
• /
• 2016

This paper presents a high efficient generator with PM(Permanent Magnet) exciter. The proposed PM exciter for the generator can produce a linear output voltage according to the engine speed. This output voltage is directly used to control the field current of the generator to adjust the generator output voltage. In the proposed generator system, since the field winding current can be supplied by the PM exciter, the generator can self-start without any battery or an external power supply due to the low residential flux. Furthermore, the operating efficiency of the generator is higher than a conventional winding exciter. The main problem of the proposed generator system, the field winding current controller has to be embedded inside the generator, and it rotates according to the generator shaft. In this paper, the proper embedded current controller is designed for the proposed generator system. Due to the embedded controller cannot be connected to the outside the generator controller, the measured instantaneous output voltage of the generator is transferred by the photo isolated communication using shaft aligned infrared transmitter and receiver to keep the constant generator output voltage. In this paper, 10kW, 380V engine generator with PM exciter and the embedded DAVR(Digital Automatic Voltage Regulator) are described. The proposed high efficiency generator is simulated and tested to verify the effectiveness.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.17 no.3
• /
• pp.9-15
• /
• 2021

In this paper, the Embedded MEMS system to the power apparatus used Edge Impulse machine learning tools and therefore an improved predictive system design is implemented. The proposed MEMS embedded system is developed based on nRF52840 system and the sensor with 3-Axis Digital Magnetometer, I2C interface and magnetic measurable range ±120 uT, BM1422AGMV which incorporates magneto impedance elements to detect magnetic field and the ARM M4 32-bit processor controller circuit in a small package. The MEMS embedded platform is consisted with Edge Impulse Machine Learning and system driver implementation between hardware and software drivers using SensorQ which is special queue including user application temporary sensor data. In this paper by experimenting, TensorFlow machine learning training output is applied to the power apparatus for analyzing the status such as "Normal, Warning, Hazard" and predicting the performance at level of 99.6% accuracy and 0.01 loss.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.64.5-64
• /
• 2002

This paper concerns a new digital redesign (DR) technique for an observer-based output-feedback control (OBOFC) system. The term DR involves converting an analog controller into an equivalent digital one in the sense of state-matching. The considered DR problem is formulated as convex minimization problems of the norm distances between linear operators to be matched. The stability condition is easily embedded and the separation principle on the DR of the OBOFC is explicitly shown. A numerical example is included for visualizing the feasibility of the proposed technique.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.199-202
• /
• 2002

This parer concerns a design methodology of the observer-based output-feedback digital controller for Takagj-Sugeno (TS) fuzzy systems using intelligent digital redesign (IDR). The term of IDR involves converting an analog fuzzy-mode-based controller into an equivalent digital one in the sense of state-matching. The considered IDR problem is viewed as convex minimization problems of the norm distances between linear operators to be matched. The stability condition is easily embedded and the separations principle is explicitly shown.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.327-331
• /
• 2008

본 논문에서는 ALtera Cyclone II FPGA와 VGA Controller, ISP1362 Host Controller, DM9000A Ethernet Controller를 사용하여 FPGA를 구성하고, ${\mu}Clinux$를 포팅하여 Nano-X 기반에서 JPEG 파일을 디스플레이 시키는 임베디드 디지털 액자를 구현한다. 구현한 시스템은 일반적인 마이크로프로세서를 사용하지 않고 Altera 사의 Cyclone II FPGA를 이용해 직접 프로세서를 설계하고, ISP1362 Host Controller를 이용하여 USB 드라이브를 인식하며, DM9000A를 통해 웹과 연결하여 웹서버로부터 전송되어진 JPEG 이미지를 Display 할 수 있도록 설계하였다.