• 생물환경조절학회지
• /
• 제16권4호
• /
• pp.407-414
• /
• 2007

슬러지퇴비의 제조과정에서 2, 6, 8, 12주째 시료의 수용성 추출액이 몇 가지 식물의 종자 발아율과 뿌리생장에 미치는 영향에 대하여 조사한 결과는 다음과 같다. 퇴비시료 중의 총 질소 함량의 변화는 퇴비화 6주째까지는 그 함량이 다소 증가하다가 그 이후에는 다시 감소하는 경향을 나타내었다. 유기물 함량은 퇴비 화가 진행될수록 전반적으로 유기물 함량이 감소하는 경향을 나타내었고, pH는 감소하다가 퇴비화 후반부에서는 중성 부근을 나타내었으며 EC는 6주째에는 증가하다가 다시 낮아지는 경향을 보였다. 시료의 수용성 추출액의 총 질소 함량의 변화는 점차 그 함량이 증가하다가 퇴비화 12주째에는 감소하였다. 암모니아태 질소의 함량변화는 총질소의 변화와 같은 양상이었으며 암모늄태질소와 질산태질소와의 비율은 8주째까지는 증가하다가 12주째에는 오히려 감소하는 경향을 보였다. 양이온 함량은 퇴비화가 진행됨에 따라 퇴비화 초기 단계보다 퇴비화 후반부에서 모든 양이온 함량이 감소하는 경향을 나타냈다. pH는 뚜렷한 변화를 보이지 않았으며 평균 pH 6.48정도를 나타내었으며 EC는 퇴비화 2주째는 $3.43dS{\cdot}m^{-1}$에서 12주째 $1.72dS{\cdot}m^{-1}$로 낮게 나타났다. 배추 종자에서는 뿌리 생장에 대한 저해가 종자 발아에 대한 저해 보다 더 크게 나타났으나 상추 종자에서는 뿌리 생장에 비해 종자 발아에 대한 저해가 더 크게 나타났다. 퇴비화 과정 중 시료의 수용성 추출액에 대한 콩과 보리 종자의 발아시험 결과 콩 종자에서는 발아 저해가 있었으나 그 정도는 극히 미약했다. 반면 보리 종자에서는 발아 저해 작용이 뚜렷하게 나타났으며 특히 퇴비화 2주, 6주, 8주째 시료의 수용성 추출액 처리구에서는 발아가 전혀 이루어지지 않았다. 결론적으로 퇴비의 수용성 추출액의 저해작용은 식물의 종에 따라 그 정도는 다르게 확인되었으며, 종자 발아와 뿌리 생육에 대한 저해는 퇴비의 부숙시간이 경과함에 따라 다소 감소하는 경향을 보였다. 전체적으로 부숙 초기 퇴비의 수용성 물 추출액이 종자 발아와 뿌리 생장에 대한 저해가 크게 나타났으며 퇴비화가 진행될수록 종자 발아 및 뿌리 생장이 회복되는 경향을 나타내었다.

• Journal of Plant Biotechnology
• /
• 제5권3호
• /
• pp.137-142
• /
• 2003

The morphology of the leaves and the flowers of angiosperms exhibit remarkable diversity. One of the factors showing the greatest variability of leaf organs is the leaf index, namely, the ratio of leaf length to leaf width. In some cases, different varieties of a single species or closely related species can be distinguished by differences in leaf index. To some extent, the leaf index reflects the morphological adaptation of leaves to a particular environment. In addition, the growth of leaf organs is dependent on the extent of the expansion of leaf cells and on cell proliferation in the cellular level. The rates of the division and enlargement of leaf cells at each stage contribute to the final shape of the leaf, and play important roles throughout leaf development. Thus, the control of leaf shape is related to the control of the shape of cells and the size of cells within the leaf. The shape of flower also reflects the shape of leaf, since floral organs are thought to be a derivative of leaf organs. No good tools have been available for studies of the mechanisms that underlie such biodiversity. However, we have recently obtained some information about molecular mechanisms of leaf morphogenesis as a result of studies of leaves of the model plant, Arabidopsis thaliana. For example, the ANGUSTIFOLIA (AN) gene, a homolog of animal CtBP genes, controls leaf width. AN appears to regulate the polar elongation of leaf cells via control of the arrangement of cortical microtubules. By contrast, the ROTUNDIFOLIA3 (ROT3) gene controls leaf length via the biosynthesis of steroid(s). We provide here an overview of the biodiversity exhibited by the leaf index of angiosperms. Taken together, we can discuss on the possibility of the control of the shapes and size of plant organs by transgenic approaches with the results from basic researches. For example, transgenic plants that overexpressed a wildtype ROT3 gene had longer leaves than parent plants, without any changes in leaf width. Thus, The genes for leaf growth and development, such as ROT3 gene, should be useful tools for the biodesign of plant organs.

• 대한치과보철학회지
• /
• 제41권4호
• /
• pp.440-450
• /
• 2003

Statement of problem : The joints of removable partial denture alloys have failed frequently after routine usage. Purpose : The purpose of this study was to evaluate the mechanical properties of the laser welded Co-Cr alloys. Material and method : For this study 20 Co-Cr specimens were casted and 10 of them were seperated on the middle area and laser welded with Alpha laser welding machine(Siro Lasertec, Pforzheim, Germany). Rest of them which were as cast, were used as a control group. For the section of the experimental specimens, wire cutting machine was used to make a even gap of the all specimens. Laser welding was done with manufacturer's instrunction and tested each specimen by Instron Machine. Tensile strength, 0.2% yield strength and % elongations were recorded. Fractured surfaces were investigated with SEM. Results : The results were as follows : 1. The tensile strength of the laser welded group(617.7MPa) was about 75% of the as cast group(820.4MPa). It had stastically significant differences(p<0.05). 2. The % elongation of the experimental group was 6.6 which was lower than the control group(14.3). 3. Fracture of the experimental group occured in the welded surface and showed many voids. In contrast, the fracture surface of the control group was showed rough surfaces without any voids. Conclusion : The tensile strengths of the as-cast joints were higher than those for the laser welded joints, and the % elongation of the experimental group was lower than the control group. Porosity was found in laser-welded joints.

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2003년도 식물바이오벤처 페스티발
• /
• pp.49-55
• /
• 2003

The morphology of the leaves and the flowers of angiosperms exhibit remarkable diversity. One of the factors showing the greatest variability of leaf organs is the leaf index, namely, the ratio of leaf length to leaf width. In some cases, different varieties of a single species or closely related species can be distinguished by differences in leaf index. To some extent, the leaf index reflects the morphological adaptation of leaves to a particular environment. In addition, the growth of leaf organs is dependent on the extent of the expansion of leaf cells and on cell proliferation in the cellular level. The rates of the division and enlargement of leaf cells at each stage contribute to the final shape of the leaf, and play important roles throughout leaf development. Thus, the control of leaf shape is related to the control of the shape of cells and the size of cells within the leaf. The shape of flower also reflects the shape of leaf, since floral organs are thought to be a derivative of leaf organs. No good tools have been available for studies of the mechanisms that underlie such biodiversity. However, we have recently obtained some information about molecular mechanisms of leaf morphogenesis as a result of studies of leaves of the model plant, Arabidopsis thaliana. For example, the ANGUSTIFOLIA (AN) gene, a homolog of animal CtBP genes, controls leaf width. AN appears to regulate the polar elongation of leaf cells via control of the arrangement of cortical microtubules. By contrast, the ROTUNDIFOLIA3 (ROT3) gene controls leaf length via the biosynthesis of steroid(s). We provide here an overview of the biodiversity exhibited by the leaf index of angiosperms. Taken together, we can discuss on the possibility of the control of the shapes and size of plant organs by transgenic approaches with the results from basic researches. For example, transgenic plants that overexpressed a wild-type ROT3 gene had longer leaves than parent plants, without any changes in leaf width. Thus, The genes for leaf growth and development, such as ROT3 gene, should be useful tools for the biodesign of plant organs.

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.597-608
• /
• 2021

The control head components used in small military vessels are designed to be domestically produced, prototypes, structural analysis, and casting methods are designed and cast. The control head assembly consists of a lever, an aluminum outside cover, Middle, front gear cover, back gear cover, and a zinc worm gear. In order to reverse the design of each component, 3D scanning device was used, 3D modeling was performed by CATIA, and prototype productions were carried out by 3D printer. In order to reduce the cost of components, gating system is used by gravity casting method. The SRG ratio of 1:0.9:0.6 was set by applying non-pressurized gating system to aluminum parts, 1:2.2:2.0 and pressurized gating system to zinc parts, and the shapes of sprue, runner and gate were designed. The results of porosity were also confirmed by casting analysis in order to determine whether the appropriate gating system can be designed. The results showed that all parts started solidification after filling completely. ANSYS was used for structural analysis, and the results confirmed that all five components had a safety factor of 15 more. All castings are free of defects in appearance, and CT results show only very small porosity. ZnDC1 zinc alloy worm gear has a tensile strength of 285 MPa and an elongation of 8%. The tensile strength of the four components of A356 aluminum alloy is about 137-162 MPa and the elongation is 4.8-6.5%.

• 생물환경조절학회지
• /
• 제6권1호
• /
• pp.15-25
• /
• 1997

피망(Capsicum annuum L.) 플러그 육묘시 초장 조절을 위해 주야간 온도차(DIF)에 따른 16조합 처리를 50일간 실시한 뒤 각각의 묘소질에 따른 정식후 생육에 관하여 실험하였다. 주야간 온도차 처리에 따른 피망 플러그묘의 초장은 주간온도가 증가함에 따라 증가하였고, 같은 일평균 온도에서는 -DIF에 의해 억제되고, +DIF에 의해 촉진되었다. 엽전개 속도는 DIF처리 효과보다는 일평균 온도에 의해 좌우되었고, 생체중 및 건물중은 일평균 온도가 증가할수록 증가하였고 야간온도에 비해 주간온도가 크게 영향을 미쳤다. 엽면적과 줄기직경은 주야간온도가 16$^{\circ}C$부터 24$^{\circ}C$로 증가할 때까지 증가하다가 그 이상의 온도에서는 감소하였다. 육묘시 온도처리에 따른 제 1번화의 착생 절위는 일평균 온도가 증가할수록 낮아졌으나 화뢰의 퇴화는 오히려 증가하였다. 이상의 결과를 종합해 볼 때 피망육묘시 DIF를 조절하여 육묘시 초장조절이 가능하며 -DIF 처리로 초장이 억제된 유묘일지라도 정식후 +DIF 조건에서 재배함으로써 생육을 촉진시킬 수 있었다. 또한 엽전개 속도(생육속도)와 제 1번 화의 화아 분화도 일평균 온도를 조절함으로써 조절이 가능하며, 적온 범위 내에서 일평균 온도를 증가시킴으로써 화아 분화를 촉진시킬 수 있다고 판단된다.

• 한국잠사곤충학회지
• /
• 제17권1호
• /
• pp.69-74
• /
• 1975

우리나라 생사의 품질수준을 통계적 관리법으로 분석하여 다음과 같은 결과를 얻었다. 1. 우리나라제사공장의 생사제조에 있어서의 품질관리법으로서는 2A격 이상의 생사를 생산할 수 없었다. 2. 생사의 품질을 향상시키기 위하여서는 사조반평균점과 대중절점을 중점적으로 관리하여야 한다. 3. 생사검사항목별로 볼 때에 재조와 신도성적은 매년 악화되어 가고 있다. 4. X-$\sigma$관리도로 볼 때 사조반열등점은 안정화되어 있으나 대중절점은 불안정한 상태로서 그의 편차의 변동범위가 컸었다.

• 생명과학회지
• /
• 제23권1호
• /
• pp.8-14
• /
• 2013

고추 탄저병균의 포자 발아 단계에서 발현되는 유전자를 파악하기 위해 포자 발아단계cDNA library를 제작하고, 임의로 선택된 cDNA clone들에 대한 EST sequencing을 실시하였다. 총 983개 EST를 확보하여 contig assembly를 실시한 결과, 197개 contigs와 267개 singletons으로 조합되어, 최종적으로 464개의 유전자를 동정하였다. 464개 유전자 서열에서 유추한 아미노산 서열을 이용한 상동유전자 검색을 통해 절반의 유전자가 GenBank에 기존 등록된 유전자와 유의성 있는 유사성을 보였다. 가장 높은 빈도로 발현된 유전자는 elongation factor, histone protein, ATP synthease, 14-3-3 protein, clock controlled protein을 암호화하는 유전자들이었다. 그리고 고추 탄저병균의 세포 발달과정에 관여 하는것으로 추정되는 GTP-binding protein, MAP kinase, transaldolase, ABC transporter 유전자들도 검출되었다. 또한 고추탄저병균의 병원성에 영향을 미치는 것으로 파악되는 ATP citrate lyase, CAP20, manganese-superoxide dismutase 유전자들도 검출되어, EST sequencing 을 통한 세포 발달 단계 발현 유전자 탐색이 효과적임을 알 수 있었다.

• The Korean Journal of Ecology
• /
• 제15권2호
• /
• pp.173-180
• /
• 1992

Pb, Zn tolerance of phaseolus multiflorus was investigated, based on the elongation of root and stem, pollen Germination and progeny quality in various pb, zn concentrations. The result obtained by water culture showed that the growth of roots and steams of phaseolus multiflorus from pb-zn mine site is less inhivited than that of the control site. The flower of phaseolus multiflorus from which pollen was taken were grown without added pb, zn and percent germination of pollen observed in a range of pb, zn concentrations. The percent germination of pollen from pb-zn mine site was higher than the control site. phaseolus multiflorus collected at a pb-zn mine site and the control site was site were grown at different pb, zn concentrations, its progeny was retreated with same concentrations of pb-zn mine site was more vigorous than the control site. thus, pb-zn tolerance was able to expressed in both pollen and sporophytes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.645-650
• /
• 2000

In the prestressed concrete structures, the effective prestressing force of tendon is basically most important item for structural safety and serviceability. The frictional loss is one of the major items for determinating the effective prestressing force and depend on the construction accuracy of the structures. In this thesis, it will be analyzed and found through measured hydraulic jack pressure, tendon elongation and prestressing control system that the tendancy of apparent curvature friction coefficient, the ratio of jacking force and required prestressing force, the ratio of initial jacking force and required prestressing force and compatibility of specified friction loss coefficient. The specified control limit for curvature friction coefficient of prestressing control system is about 0.25 and wobble friction coefficient 0.005. Thus, the control limit should be modified according to changed vale of friction coefficient.