• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.7
• /
• pp.1802-1814
• /
• 2012

In order to guide users to select the most optimal access network in heterogeneous wireless networks, a network selection algorithm is proposed which is designed based on multi-objective discrete particle swarm optimization (Multi-Objective Discrete Particle Swarm Optimization, MODPSO). The proposed algorithm keeps fast convergence speed and strong adaptability features of the particle swarm optimization. In addition, it updates an elite set to achieve multi-objective decision-making. Meanwhile, a mutation operator is adopted to make the algorithm converge to the global optimal. Simulation results show that compared to the single-objective algorithm, the proposed algorithm can obtain the optimal combination performance and take into account both the network state and the user preferences.

• Journal of Plant Biotechnology
• /
• v.45 no.3
• /
• pp.242-249
• /
• 2018

This study was conducted to develop an SNP set that can be useful for marker-assisted breeding (MAB) in watermelon (Citrullus. lanatus L) using Genotyping-by-sequencing (GBS) analysis of 20 commercial elite watermelon inbreds. The result of GBS showed that 77% of approximately 1.1 billion raw reads were mapped on the watermelon genome with an average mapping region of about 4,000 Kb, which indicated genome coverage of 2.3%. After the filtering process, a total of 2,670 SNPs with an average depth of 31.57 and the PIC (Polymorphic Information Content) value of 0.1~0.38 for 20 elite inbreds were obtained. Among those SNPs, 55 SNPs (5 SNPs per chromosome that are equally distributed on each chromosome) were selected. For the understanding genetic relationship of 20 elite inbreds, PCA (Principal Component Analysis) was carried out with 55 SNPs, which resulted in the classification of inbreds into 4 groups based on PC1 (52%) and PC2 (11%), thus causing differentiation between the inbreds. A similar classification pattern for PCA was observed from hierarchical clustering analysis. The SNP set developed in this study has the potential for application to cultivar identification, F1 seed purity test, and marker-assisted backcross (MABC) not only for 20 elite inbreds but also for diverse resources for watermelon breeding.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.31-39
• /
• 2007

The purpose of this study was to observe the kinematic pattern of elite women 100m hurdler race from start to finish and analyze how the change of horizontal velocity makes an influence on the athletes' performance. The analysis was based on the performance of Korean elite 100m hurdler A and international elite hurdlers B and C. Following results were drawn from the analyzation of elite 100m hurdlers' technical characteristics; During the race, hurdler A made more than 8 m/s of horizontal velocity at the 3rd, 4th, 6th, and the 7th hurdle. The horizontal velocity peaked at the 4th hurdle with 8.23 m/s. On the other hand, hurdler B and hurdler C maintained more than 8 m/s of horizontal velocity from the 2nd hurdle through the 10th hurdle. Hurdler B's fastest horizontal velocity was 8.67 m/s from the 6th to the 7th hurdle and hurdler C's fastest horizontal velocity was 8.85 m/s from the 5th to the 8th hurdle. From the start line to the 3rd hurdle, the times achieved by hurdlers A, B, and C were 4.90 sec, 4.65 sec, and 4.52 sec. In the middle of the race, which is from the 4th hurdle to the 7th hurdle, hurdlers A, B, and C ran in 9.10 sec, 8.60 sec, and 8.38 sec. And the latter part of the race to the 10th hurdle, the times hurdlers A, B, and C hit were 12.32 sec, 11.66 sec, and 11.32 sec. To the finish line, it took 1.15 sec for hurdler A, 1.1 sec for B, and 1.06 sec for C. Hence, to set the record of sub-13 sec, hurdler A should improve her acceleration from the start line to the 1st hurdle with the speed more than 5.4 m/s and should maintain more than 8 m/s of horizontal velocity from the 2nd hurdle through the 10th hurdle. In addition, hurdler A should improve her speed endurance to minimize the deceleration of horizontal velocity from the 4th hurdle to the final hurdle. If hurdler A could shorten 0.05 sec of time in each hurdle section, she would be able to set the record under 13 seconds.

• Korean Journal of Applied Biomechanics
• /
• v.34 no.1
• /
• pp.18-24
• /
• 2024

Objective: The purpose of this study was to evaluate the effects of an 8-week velocity-based training on the maximum vertical jump in elite sprinters. Method: Ten elite sprinters were participated in this study (age: 21 ± 0.97 yrs., height: 179 ± 3.54 cm, body mass: 72 ± 2.98 kg). An 8-week velocity-based power training was provided to all subjects for twice per week. Their maximum vertical jumps were measured before and after velocity-based training. A 3-dimensional motion analysis with 8 infrared cameras and 4 channels of EMG was performed in this study. A paired t-test was used for statistical verification. The significant level was set at α=.05. Results: There were no statistically significant differences were found between pre and post the training (p>.05). However, most variables included jump record, knee joint ROM, and muscle activation of rectus femoris showed increased pattern after the training. Conclusion: In this study, an 8-week velocity-based training did not showed the significant training effects. However, knee joint movement which is the key role of the vertical jump revealed positive kinematic and kinetic pattern after the training. From this founding, it is believed that velocity-based training seems positively affect the vertical jump which is the clear measurement of mechanical power of sprinter. In addition, to get more clear evidence of the training more training period would be needed.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.4
• /
• pp.324-333
• /
• 2013

The purpose of this paper is to improve the efficiency of multi-objective topology optimization using a genetic algorithm (GA) with bar-system representation. We proposed a new GA using an elite initial population obtained from a Solid Isotropic Material with Penalization (SIMP) using a weighted sum method. SIMP with a weighted sum method is one of the most established methods using sensitivity analysis. Although the implementation of the SIMP method is straightforward and computationally effective, it may be difficult to find a complete Pareto-optimal set in a multi-objective optimization problem. In this study, to build a more convergent and diverse global Pareto-optimal set and reduce the GA computational cost, some individuals, with similar topology to the local optimum solution obtained from the SIMP using the weighted sum method, were introduced for the initial population of the GA. The proposed method was applied to a structural topology optimization example and the results of the proposed method were compared with those of the traditional method using standard random initialization for the initial population of the GA.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.3
• /
• pp.567-578
• /
• 2014

PEAS (performance enhancement attitude scale) has been used to measure attitude and disposition toward doping in elite athlete. It is constructed of 17-item, 6-point scale. The purpose of this study was to verify validity of the PEAS for Korean elite player through Rasch model. The scale was administered to 438 Korean elite players. Principal component analysis was used to verify unidimensionality using SPSS program. Rasch measurement computer program, WISTEPS, was used to estimate goodness-of-fit of items and category structure. Differenctial item functioning by gender was also estimated by the WINSTEPS program. All alpha level was set at 0.05. First, principal component analysis showed that unidimensionality is satisfied as over 20.0% of variance of eigenvalue. Second, category probabilities curve showed 5-point scale was better than 6-point scaled statistically. Third, seven items (1, 9, 10, 12, 13, 14, 17) in the 17-item were not good model fit and three items (3, 12, 13) were estimated as the differential item functioning. This study showed that 9-item, 5-point scale is better PEAS to Korean elite player.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.1
• /
• pp.11-20
• /
• 2016

Objective: This study aimed to compare biomechanical data between elite and beginner cyclists during cycle pedaling by performing a comparative analysis and to provide quantitative data for both pedaling performance enhancement and injury prevention. Methods: The subjects of this study included 5 elite cyclists (age: $18{\pm}0years$, body mass: $64.8{\pm}9.52kg$, height: $173.0{\pm}4.80cm$) and 5 amateur cyclists (age: $20{\pm}0years$, mass: $66.6{\pm}2.36kg$, height: $175.6{\pm}1.95cm$). The subjects pedaled on a stationary bicycle mounted on rollers of the same gear (front: 50 T and rear: 17 T = 2.94) and cadence of 90. The saddle height was adjusted to fit the body of each subject, and all the subjects wore shoes with cleats. In order to obtain kinematic data, 4 cameras (GR-HD1KR, JVC, Japan) were installed and set at 60 frames/sec. An electromyography (EMG) system (Telemyo 2400T, Noraxon, USA) was used to measure muscle activation. Eight sets of data from both the left and right lower extremities were obtained from 4 muscles (vastus medialis oblique [VMO], vastus lateralis oblique [VLO], and semitendinosus [Semitend], and lateral gastrocnemius [Gastro]) bilaterally by using a sampling frequency of 1,500 Hz. Five sets of events ($0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$, and $360^{\circ}$) and 4 phases (P1, P2, P3, and P4) were set up for the data analysis. Imaging data were analyzed for kinematic factors by using the Kwon3D XP computer software (Visol, Korea). MyoResearch XP Master Edition (Noraxon) was used for filtering and processing EMG signals. Results: The angular velocity at $360^{\circ}$ from the feet was higher in the amateur cyclists, but accelerations at $90^{\circ}$ and $180^{\circ}$ were higher in the elite cyclists. The amateur cyclists had greater joint angles at $270^{\circ}$ from the ankle and wider knee joint distance at $0^{\circ}$, $180^{\circ}$, and $360^{\circ}$ than the elite cyclists. The EMG measurements showed significant differences between P2 and P4 from both the right VLO and Semitend. Conclusion: This study showed that lower body movements appeared to be different according to the level of cycle pedaling experience. This finding may be used to improve pedaling performance and prevent injuries among cyclists.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.3
• /
• pp.101-109
• /
• 2023

Objective: The aim of this study is to verify the differences in muscle characteristics of elite level swimmers before and after a 2-hour practice session. Method: The study was conducted on 15 elite swimmers. Preliminary measurements for each muscle (Anterior Deltoid, Triceps Brachii, Biceps Brachii, Flexor Carpi Ulnaris) were taken using the MyotonPRO device before training. After approximately 2 hours of training, the same muscle areas were measured again. The collected data was analyzed through descriptive statistics and two-way 2×2 RG·RM ANOVA, and all statistical significance levels were set at α=.05. Results: After analyzing the characteristics of the Flexor Carpi Ulnaris (FCU) before and after training in both proficiency level swimmers (excellent, non-excellent), it was found that the interaction effect of group X repetition in muscle tension (F), muscle stiffness (S), and body recovery time (R) was statistically significant. Secondly, in the analysis of the Biceps Brachii (BB), the main effect of repetition in muscle tension (F), muscle stiffness (S), and body recovery time (R) was statistically significant. Furthermore, the interaction effect of group X repetition in muscle stiffness (S) and body recovery time (R) was statistically significant. Conclusion: The efficient use of FCU and BB suggests that it is an important factor distinguishing the performance of excellent and non-excellent swimmers in swimming. Therefore, if we develop and apply measures to efficiently utilize FCU and BB during training, it can help improve the performance of the athletes.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.61-61
• /
• 2019

In any crop breeding program Selection and use of genetically diverse genotypes to develop cultivars with a broad genetic base is important. Molecular markers play a major role in selecting diverse genotypes. Molecular breeding programs of the crop can be made more efficient by use of molecular markers. The present study was done with an aim of analyzing genetic diversity and the population structure in 24 accessions of sunflower (Helianthus annus L.) from Kenya genetic diversity using 35 EST-SSR and gSSR primers.Out of the 35 markers 3 were not polymorphic as they indicated Polymorphic Information content( PIC) of value 0.00 and so the data analysis was done using 32 markers . The 32 set of markers used produced 29 alleles ranging from 2 to 7with a mean of 3.0 alleles per locus.The average value of polymorphic information contents(PIC) were 0.3 .Genetic diversity analysis using these markers revealed 3 major clusters. This result could be useful for designing strategies to make elite hybrid and inbreeding of crossing block for breeding and future molecular breeding programs to make elite variety.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2012

State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.