• 한국공간구조학회논문집
• /
• 제3권1호
• /
• pp.57-68
• /
• 2003

This paper have performed to investigate the influence of certain parameters, including the boundary condition types, load ratios of the steel beams, and span/depth ratios of the beams itself on the structural behaviour of the steel beams at elevated temperatures. This paper is analysed the stress and vertical deflection at mid-span of the steel beams at elevated temperatures and also predicted 'failure' temperatures of the steel beams at elevated temperatures. Fire analysis used here is analysed by software VULCAN. Design examples are given to describe the structural behaviour of the steel beams at elevated temperatures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.877-881
• /
• 2002

Much research efforts have been made on the equal channel angular pressing(ECAP) which produces ultra-fine grains. In this paper the ECAP processes with Zr-702 alloy at elevated temperature and at room temperature are considered. Both two-dimensional and three-dimensional finite element analyses have been employed to investigate the deformation behaviors of specimen during ECAP process.

• 한국농림기상학회지
• /
• 제15권4호
• /
• pp.245-263
• /
• 2013

본 시험은 기후변화의 영향과 관련하여 기온 및 $CO_2$ 농도 상승이 '후지'/M.9 사과나무의 광합성 및 과실품질에 미치는 영향을 알아보고자 지난 4년(2009-2012)동안 시험이 이루어졌다. 처리구들은 'Ambient' (대기온도+대기 $CO_2$ 농도), 'High $CO_2$'(대기온도+상승 $CO_2$ 농도), 'High Temp'. (상승온도+대기 $CO_2$ 농도), 'High $CO_2$+High Temp'. (상승온도+상승 $CO_2$ 농도)이었다. 상승온도 처리구들은 대기온도보다 $4^{\circ}C$ 상승시켰고, 상승 $CO_2$ 농도 처리구들은 $700{\mu}mol{\cdot}mol^{-1}$로 유지하였다. 4년 동안 매년 처리기간은 4월말부터 11월초까지였다. $CO_2$ 상승은 기공전도도와 잎의 엽록체함량(SPAD 계량기 값)을 감소시켰으나, 광합성속도, 세포 내 $CO_2$ 농도(Ci) 및 잎의 전분함량은 증가시켰다. 수체생장에 있어, 기온 상승은 나무당 총 신초수와 총 신초생장량을 증가시켰으나, $CO_2$ 상승은 평균 신초장을 감소시켰다. 과실품질에 있어, $CO_2$ 상승은 착색, 가용성 고형물 함량, 및 에틸렌 발생량을 증진시켰다. 결론적으로, $CO_2$ 농도가 상승되면 생육초기에 사과나무의 광합성속도가 증가되었으나 생육후기에는 $CO_2$ 상승에 따른 광합성속도 증진 효과가 감소되었다. 반면에 기온 상승은 생육초기 광합성속도를 감소시켰으나 생육후기에 광합성속도를 증진시키는 경향이 있었다. $CO_2$와 기온의 동시 상승은 각 요인에 의한 광합성 감소 정도가 줄어드는 경향이 있었다.

• 생물환경조절학회지
• /
• 제18권2호
• /
• pp.148-152
• /
• 2009

본 연구는 배추 재배시 기후변화에 대비하여 고온과 고농도의 이산화탄소 조건에서 생육반응과 세포조직의 변화를 알아보고자 수행하였다. 처리는 '대기중 온도+대기중 $CO_{2}$ 농도(Control)', '대기중 온도+대기보다 $CO_{2}$ 2배 상승(Elevated $CO_{2}$)' '(대기온도보다 4$^{\circ}C$ 상승+대기중 $CO_{2}$ 농도(Elevated temp.)', '대기온도보다 4$^{\circ}C$ 상승+대기보다 $CO_{2}$ 2배 상승(Elevated temp.+$CO_{2}$)'의 4가지 조건으로 처리하였다. 그 결과, 대기조건보다 온도만 높아지게 되면 배추의 생체중이 현저하게 저하되어 수량이 떨어지는 것으로 나타났고, 온도가 높아지고 $CO_{2}$ 농도가 동시에 올라가게 되면 생육이 어느정도 회복되는 것으로 나타났다. 또한 칼륨과 인산함량은 처리별로 차이가 없었지만 칼슘과 총질소함량은 온도만 높인 처리에서 높았고, 마그네슘 함량은 온도와 $CO_{2}$ 농도를 동시에 높인 처리에서 높게 나타났다. 배추잎의 세포 관찰결과 $CO_{2}$ 농도를 2배 정도 높인 처리에서 잎내의 전분함량이 증가하는 것으로 나타났고, 온도만 높인 처리에서 전분 함량이 가장 낮았다.

• The Plant Pathology Journal
• /
• 제26권2호
• /
• pp.178-184
• /
• 2010

Four major diseases of chili pepper including two fungal diseases, anthracnose (Colletotrichum acutatum) and Phytophthora blight (Phytophthora capsici), and two bacterial diseases, bacterial wilt (Ralstonia solanacearum) and bacterial spot (Xanthomonas campestris pv. vesicatoria), were investigated under future climate-change condition treatments in growth chambers. Treatments with elevated $CO_2$ and temperature were maintained at $720ppm{\pm}20ppm$ $CO_2$ and $30^{\circ}C{\pm}0.5^{\circ}C$, whereas ambient conditions were maintained at $420ppm{\pm}20ppm$ $CO_2$ and $25^{\circ}C{\pm}0.5^{\circ}C$. Pepper seedlings or fruits were infected with each pathogen, and then the disease progress was evaluated in the growth chambers. According to paired t-test analyses, bacterial wilt and spot diseases significantly increased by 24% (p=0.008) and 25% (p=0.016), respectively, with elevated $CO_2$ and temperature conditions. On the other hand, neither Phytophthora blight (p=0.906) nor anthracnose (p=0.125) was statistically significant. The elevated $CO_2$ and temperature accelerated the progress of bacterial wilt by two days and bacterial spot by one day compared to the ambient treatment. Temperature regime studies of the diseases without changes in $CO_2$ confirmed that the accelerated bacterial disease progress was mainly due to the increased temperature rather than the elevated $CO_2$ conditions.

• International Journal of Automotive Technology
• /
• 제5권3호
• /
• pp.155-164
• /
• 2004

The direct injection gasoline spray-wall interaction was characterized inside a heated pressurized chamber using various visualization techniques, including high-speed laser-sheet macroscopic and microscopic movies up to 25,000 frames per second, shadowgraph, and double-spark particle image velocimetry. Two hollow cone high-pressure swirl injectors having different cone angles were used to inject gasoline onto a heated plate at two different impingement angles. Based on the visualization results, the overall transient spray impingement structure, fuel film formation, and preliminary droplet size and velocity were analyzed. The results show that upward spray vortex inside the spray is more obvious at elevated temperature condition, particularly for the wide-cone-angle injector, due to the vaporization of small droplets and decreased air density. Film build-up on the surface is clearly observed at both ambient and elevated temperature, especially for narrow cone spray. Vapor phase appears at both ambient and elevated temperature conditions, particularly in the toroidal vortex and impingement plume. More rapid impingement and faster horizontal spread after impingement are observed for elevated temperature conditions. Droplet rebounding and film break-up are clearly observed. Post-impingement droplets are significantly smaller than pre-impingement droplets with a more horizontal velocity component regardless of the wall temperature and impingement angle condition.

• Composites Research
• /
• 제22권5호
• /
• pp.30-36
• /
• 2009

복합재 부품의 전형적인 조인트 형태를 평가하기 위해서, 2열 볼트 체결 탄소섬유강화 복합재의 파손강도와 파손 모드에 대하여 연구를 수행하였다. 연구는 상온과 고온다습 조건에서 적층과 형상을 변수로 실험적으로 수행되었다. 실험결과를 바탕으로 다음과 같은 결론을 얻었다. 하중-변위 선도는 두 가지 형태로 관찰되었으며, 각 파손 모드는 하중-변위 선도로 특징지어진다. 고온다습 조건의 파손형태는 베어링 파손 모드이며, 베어링 파손 모드에서 파손 강도는 유효강성의 영향이 크지 않다고 분석된다. 고온다습 조건의 파손강도 감소는 침투한 수분에 의해 섬유와 모재의 층간 결합부의 물성 저하에 기인한다.

• Steel and Composite Structures
• /
• 제2권4호
• /
• pp.247-258
• /
• 2002

The high-temperature material properties of steel are very important to the fire resistance analysis of high-strength bolt connections. This paper reports on the results of the experimental studies on the high-temperature properties of 20 MnTiB steel which is widely used in high-strength bolts, and the friction coefficient of 16Mn steel plates at elevated temperature which is a necessary parameter for bolted frictional connection analysis. The test data includes yield strength, limit strength, modulus of elasticity, elongation and expansion coefficient of 20MnTiB steel at elevated temperature, and the friction coefficients between two 16Mn steel plates under elevated temperatures and after cooling. Based on the data from the tests, the mathematical models for predicting the mechanical properties of 20MnTiB steel and friction coefficients of 16Mn steel plates have been established.

• Mycobiology
• /
• 제32권1호
• /
• pp.11-16
• /
• 2004

Winter mushroom, Flammulina velutipes, needs low temperature during its cultivation. To save on farm costs, especially during summer, a strain adaptable to a higher or elevated-temperature must be developed. At the start of breeding program, parental strains which could endure high temperature were obtained. Seuenty four dikaryotic strains were collected and divided into four groups according to the nature of temperature. They also had different fruiting temperature. Finally we selected three brown strains ASI 4048, 4057 and 4072, and collected their spores. These selected strains can germinate even at a high temperature of $32^{\circ}C$, which were dramatically higher than the other strains. Based on these results, the new white strain adapted to mid-temperature by backcross mating was developed. Molecular markers were applied to select white fruitbody producing strains without cultivation. They showed a specific band which co-segregated with brown fruitbody forming strains in $BC_1F_1$ progenies. Selected white strains were tested under several elevated temperature conditions.

• 한국환경농학회지
• /
• 제28권3호
• /
• pp.233-237
• /
• 2009

It has widely been observed that the effect of elevating atmospheric $CO_2$ concentrations on rice productivity depends largely on soil N availabilities. However, the responses of ammonia volatilization from flooded paddy soil that is an important pathway of N loss and thus affecting fertilizer N availability to concomitant increases in atmospheric $CO_2$ and temperature has rarely been studied. In this paper, we first report the interactive effect of elevated $CO_2$ and temperature on ammonia volatilization from rice paddy soils applied with urea. Urea labeled with $^{15}N$ was used to quantitatively estimate the contribution of applied urea-N to total ammonia volatilization. This study was conducted using Temperature Gradient Chambers (TGCs) with two $CO_2$ levels [ambient $CO_2$ (AC), 383 ppmv and elevated $CO_2$ (EC), 645 ppmv] as whole-plot treatment (main treatment) and two temperature levels [ambient temperature (AT), $25.7^{\circ}C$ and elevated temperature (ET), $27.8^{\circ}C$] as split-plot treatments (sub-treatment) with triplicates. Elevated temperature increased ammonia volatilization probably due to a shift of chemical equilibrium toward $NH_3$ production via enhanced hydrolysis of urea to $NH_3$ of which rate is dependent on temperature. Meanwhile, elevated $CO_2$ decreased ammonia volatilization and that could be attributed to increased rhizosphere biomass that assimilates $NH_4^+$ otherwise being lost via volatilization. Such opposite effects of elevated temperature and $CO_2$ resulted in the accumulated amount of ammonia volatilization in the order of ACET>ACAT>ECET>ECAT. The pattern of ammonia volatilization from applied urea-$^{15}N$ as affected by treatments was very similar to that of total ammonia volatilization. Our results suggest that elevated $CO_2$ has the potential to decrease ammonia volatilization from paddy soils applied with urea, but the effect could partially be offset when air temperature rises concomitantly.