• Journal of the Korean Vacuum Society
• /
• v.7 no.1
• /
• pp.17-23
• /
• 1998

$Pb(Fe_{0.5}Nb_{0.5}O_3(PFN)$ thin films were prepared by rf magnetron co-sputtering method on $SiO_2/Si$, ITO/glass, and $Pt/Ti/SiO_2/Si$ substrates and post-annealed at the $N_2$ atmosphere by RTA(rapid thermal annerling). The degree of crystallinity of PFN films was identified on various substrates. Electrical properties of PFN films was characterized for $Pt/PFN/Pt/Ti/SiO_2/Si$ structure. The composition of PFN films was estimated by EPMA (electron probe micro analysis). PFN films would be crystallized better to perovskite phase on ITO/glass substrate than $SiO_2/Si$ substrate. This may be induced by the deformation of Pb deficient pyrochlore phase due to Pb diffusion into $SiO_2/Si$ substrate. PFN films on $Pt/Ti/SiO_2/Si$ substrate. PFN films with 5-10% Pb excess were crystallized to perovskite phase from $500^{\circ}C$ temperature. In summary, we show that Pb composition and annealing temperature were critically influenced on crystallinity to perovskite phase. When PFN film with 17% Pb excess was annealed at $600^{\circ}C$ at the $N_2$ atmosphere for 300kV/cm and 88. Its remnant polarization coercive field $2.0 MC/cm^2$ and 144kV/cm, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.67-67
• /
• 2011

Pulsed DC $BCl_3/SF_6$ 플라즈마를 사용하여 GaAs와 AlGaAs의 건식 식각을 연구하였다. 식각 공정 변수는 가스 유량 (50~100 % $BCl_3$ in $BCl_3/SF_6$), 펄스 파워 (450~600 V), 펄스 주파수 (100~250 KHz), 리버스 시간 (0.4~1.2 ${\mu}s$)이었다. 식각 공정 후 표면 단차 측정기 (Surface profiler)를 사용하여 표면의 단차와 거칠기를 분석하였다. 그 결과를 이용하여 식각률 (Etch rate), 표면거칠기 (Surface roughness), 식각 선택비 (Selectivity)와 같은 특성 평가를 하였다. 실험 후 주사 현미경 (FE-SEM, Field Emission Scanning Electron Microscopy)을 이용, 식각 후 시료의 단면과 표면을 관찰하였다. 실험 결과에 의하면 1) 18 sccm $BCl_3$ / 2 sccm $SF_6$, 500 V (Pulsed DC voltage), 0.7 ${\mu}s$ (Reverse time), 200 KHz (Pulsed DC frequency), 공정 압력이 100 mTorr인 조건에서 GaAs와 Al0.2Ga0.8As의 식각 선택비가 약 48:1로 우수한 결과를 나타내었다. 2) 펄스 파워 (Pulsed DC voltage), 리버스 시간(Reverse time), 펄스 주파수(Pulsed DC frequency)의 증가에 따라 각각 500~550 V, 0.7~1.0 ${\mu}s$, 그리고 200~250 KHz 구간에서 AlGaAs에 대한 GaAs의 선택비가 감소하게 되는 것을 알 수 있었다. 이는 척 (chuck)에 인가되는 전류와 파워를 증가시키고, 따라서 GaAs의 식각률이 크게 증가했지만 AlGaAs 또한 식각률이 증가하게 되면서 GaAs에 대한 식각 선택비가 감소한 것으로 생각된다. 3) 표면 단차 측정기와 주사전자현미경 사진 결과에서는 GaAs의 경우 10% $SF_6$ (18 sccm $BCl_3$ / 2 sccm $SF_6$)가 혼합된 조건에서 상당히 매끈한 표면 (RMS roughness < 1.0 nm)과 높은 식각률 (~0.35 ${\mu}m$/min), 수직의 식각 측벽 확보에서 매우 좋은 결과를 보여주었다. 또한 같은 공정 조건에서 AlGaAs는 식각이 거의 되지 않은 결과 (~0.03 ${\mu}m$/min)를 보여주었다. 위의 결과들을 종합해 볼 때 Pulsed DC $BCl_3/SF_6$ 플라즈마는 GaAs와 AlGaAs의 선택적 식각 공정에서 매우 우수한 공정 결과를 나타내었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.348-348
• /
• 2011

Carbon nanotube (CNT) field effect transistors and sensors use CNT as a current channel, of which the resistance varies with the gate voltage or upon molecule adsorption. Since the performance of CNT devices depends very much on the CNT/metal contact resistance, the CNT/electrode contact must be stable and the contact resistance must be small. Depending on the geometry of CNT/electrode contact, it can be categorized into the end-contact, embedded-contact (top-contact), and side-contact (bottom-contact). Because of difficulties in the sample preparation, the end-contact CNT device is seldom practiced. The embedded-contact in which CNT is embedded inside the electrode is desirable due to its rigidness and the low contact resistance. Fabrication of this structure is complicated, however, because each CNT has to be located under a high-resolution microscope and then the electrode is patterned by electron beam lithography. The side-contact is done by depositing CNT electrophoretically or by precipitating on the patterned electrode. Although this contact is fragile and the contact resistance is relatively high, the side-contact by far has been widely practiced because of its simple fabrication process. Here we introduce a simple method to embed CNT inside the electrode while taking advantage of the bottom-contact process. The idea is to utilize a eutectic material as an electrode, which melts at low temperature so that CNT is not damaged while annealing to melt the electrode to embed CNT. The lowering of CNT/Au contact resistance upon annealing at mild temperature has been reported, but the electrode in these studies did not melt and CNT laid on the surface of electrode even after annealing. In our experiment, we used a eutectic Au/Al film that melts at 250$^{\circ}C$. After depositing CNT on the electrode made of an Au/Al thin film, we annealed the sample at 250$^{\circ}C$ in air to induce eutectic melting. As a result, Au-Al alloy grains formed, under which the CNT was embedded to produce a rigid and low resistance contact. The embedded CNT contact was as strong as to tolerate the ultrasonic agitation for 90 s and the current-voltage measurement indicated that the contact resistance was lowered by a factor of 4. By performing standard fabrication process on this CNT-deposited substrate to add another pair of electrodes bridged by CNT in perpendicular direction, we could fabricate a CNT cross junction. Finally, we could conclude that the eutectic alloy electrode is valid for CNT sensors by examine the detection of Au ion which is spontaneously reduced to CNT surface. The device sustatined strong washing process and maintained its detection ability.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.2
• /
• pp.105-115
• /
• 2012

The consolidants have been widely used for the consolidation of decaying heritage stone surfaces. In this study, X-ray diffraction analysis, polarized and stereo-microscope and scanning electron microscope were used to study the surface characterization of granite, sandstone and marble, and to assess the efficiency and the effects of the developed condolidants in the field. The developed consolidants used in this experiment are 100%1T1G and 3%40nm/97%1T1G. The effects of consolidants are 3%40nm/97%1T1G${\gg}$100%1T1G in granite, 3%40nm/97%1T1G>100%1T1G in sandstone, and 3%40nm/97% 1T1G=100%1T1G in marble. The characteristics of rock surface when treated with consolidants show different result according to consolidantes type. This result of treating with consolidant can be used for the conservation of an decaying heritage stone.

• Journal of Powder Materials
• /
• v.24 no.4
• /
• pp.302-307
• /
• 2017

In this study, Fe-Cu-C alloy is sintered by spark plasma sintering (SPS). The sintering conditions are 60 MPa pressure with heating rates of 30, 60 and $9^{\circ}C/min$ to determine the influence of heating rate on the mechanical and microstructure properties of the sintered alloys. The microstructure and mechanical properties of the sintered Fe-Cu-C alloy is investigated by X-ray diffraction (XRD) and field-emission scanning electron microscopy (FE-SEM). The temperature of shrinkage displacement is changed at $450^{\circ}C$ with heating rates 30, 60, and $90^{\circ}C/min$. The temperature of the shrinkage displacement is finished at $650^{\circ}C$ when heating rate $30^{\circ}C/min$, at $700^{\circ}C$ when heating rate $60^{\circ}C/min$ and at $800^{\circ}C$ when heating rate $90^{\circ}C/min$. For the sintered alloy at heating rates of 30, 60, and $90^{\circ}C/min$, the apparent porosity is calculated to be 3.7%, 5.2%, and 7.7%, respectively. The hardness of the sintered alloys is investigated using Rockwell hardness measurements. The objective of this study is to investigate the densification behavior, porosity, and mechanical properties of the sintered Fe-Cu-C alloys depending on the heating rate.

• Economic and Environmental Geology
• /
• v.19 no.1
• /
• pp.1-18
• /
• 1986

A group of 16 $Zn+Pb{\pm}Ag$ deposits distributed in the Pyeongchang-Jucheon area, Kangwon-do, South Korea, were semi-regionally investigated. These deposits are contact metasomatic and/or hydrothermal replacement types hosted in the carbonate-dominated Cambrian Machari Formation and Ordovician Ibtanri Formation, and also in the carbonate interbeds of the Precambrian argillic metasediments. Comparing some key aspects of the individual deposits, it is found that the ore deposits hosted in the Machari and Ibtanri Formations are mostly of steeply-dipping chimneys with or without skarn minerals and are rich in Ag and Pb>Zn in metal grade whereas those occuring in the carbonate interbeds of the Precambrian argillic metasediments are gently-dipping conformable lenticular orebodies mostly with skarn minerals and are generally poor in Ag and Zn>Pb. The skarn mineralization in the area appears to have occurred during the lower Cretaceous (118.7Ma) to mid-Cretaceous (107.8Ma) time assumed from the K-Ar dates of the Dowon and Pyeongchang granites which are closely associated with the skarn ore deposits. The Rb/Ba/Sr ratios of these granites indicate that they are of strongly differentiated anomalous granites, and the Nb vs. Y and Rb vs. Y+Nb plots fall on the field of volcanic arc setting. The contact aureoles are zoned, giving the sequence in order of increasing distance from igneous contact: garnet-wollastonite, granet-wollastonite-clinopyroxene and garnet-clinopyroxene in such as the Pyeongchang and Yeonwol 114 areas. Electron microprobe analyses reveal that garnets and clinopyroxenes are generally low in Fe and Mn. Garnets are grossular to intermediate grandite except for those from the Ogryong exoskarn which are richer in andradite, pyrope and spessartine fractions. This indicates that the oxidation state of skarn-forming environment at Ogryong was higher than at the other deposits. Clinopyroxenes are mostly salitic except for those from the Ogryong exoskarn which involve considerable amounts of hedenbergite and johansenite fractions. The ${\delta}^{18}O$ value of Jurassic biotite granite at Ogryong is higher (+10.21‰) than that of Cretaceous one at Chodun (+8.41‰). The ${\delta}^{13}C$ values of carbonate rocks range from -0.89‰ to 0.68‰ and the ${\delta}^{18}O$ values range from +11.91‰ to + 19.34‰ indicating that these carbonate rocks are of marine origin. However, the ${\delta}^{13}C$ values of skarn calcite and vein calcite are -4.80‰ and -12.92‰, and the ${\delta}^{18}O$ values are +5.56‰ and +10.32‰, respectively, indicating that these calcites are of hydrothermal origin. The ${\delta}^{34}S$ values of sulfide minerals range from +4.4‰ to +8.7‰ suggesting that the sulfurs are of magmatic origin.

• Applied Microscopy
• /
• v.38 no.2
• /
• pp.89-96
• /
• 2008

Dolomedes spiders of the family Pisauridae are one of free wandering spiders with semi-aquatic habitation. They do not build web for prey-hunting but build a nursery web for spiderlings. This paper describes the fine structure of the silkspinning spigots of the fishing spider Dolomedes sulfureus revealed by the field emission scanning electron microscope (FESEM). The fishing spider Dolomedes sulfureus possesses only three types of silk glands which connected through the typical spinning tubes on the spinnerets. The silk spigots of this spider were identified as three groups: ampullates, pyriforms and aciniforms. Two pairs of major ampullate glands send secretory ductules to the anterior spinnerets, and another two pairs (or $1{\sim}2$ pairs in males) of minor ampullate glands supply the middle spinnerets. In addition, the pyriform glands feed silk into the anterior spinnerets ($62{\sim}68$ pairs in females and $45{\sim}50$ pairs in males), and the aciniforms send ductules to the middle ($33{\sim}40$ pairs in females and $18{\sim}25$ pairs in males) and the posterior spinnerets ($42{\sim}50$ pairs in females and $24{\sim}28$ pairs in males). Among these, the ampullate one is the most predominate gland in both sexes.

• Textile Coloration and Finishing
• /
• v.21 no.6
• /
• pp.1-11
• /
• 2009

Super-hydrophobic surface, with a water contact angle greater than $150^{\circ}$, has a self cleaning effect termed 'lotus effect'. We introduced super-hydrophobicity onto aramid/rayon mixture fabric with dual-scale structure by assembling silica nano-sol. Mixture fabric was treated with silica nano-sol, fluoric polymer using various parameters such as particle size, concentration. Silica nano-sol size were measured using particle size analyzer. Morphological changes by particle size were observed using field emission scanning electron microscopy(FE-SEM), contact angle measurement equipment. The contact angle of water was about $134.0^{\circ}$, $137.0^{\circ}$, $143.0^{\circ}$, $139.5^{\circ}$ and $139.0^{\circ}$ for mixture fabric coated with 100.2nm, 313.7nm, 558.2nm, 628.5nm and 965.4nm silica nano-sol, compared with about $120.0^{\circ}$ for mixture fabric coated with fluoric polymer. When we mixed particle sizes of 100.2nm and 558.2nm by 7:3 volume ratio, the contact angle of water was about $146.2^{\circ}$. And we mixed particle sizes of 313.7nm and 558.2nm by 7:3 volume ratio, the contact angle of water was about $141.8^{\circ}$. Also we mixed particle sizes of 558.2nm and 965.4nm by 7:3 volume ratio, the best super-hydrophobicity was obtained. In this paper, we fabricated the water-repellent surfaces with various surface structures by using four types of silica nano-sol, and we found that the dual-scale structure was very important for the super-hydrophobicity.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.4
• /
• pp.355-358
• /
• 2015

BACKGROUND: Changes in Korea's agricultural soil properties were analyzed at a four-year interval from 1999 to 2002 on a national scale and used as basis for the determination of the appropriate agricultural policy on maintaining food safety and soil quality. The scope of this study ideally requires sampling thousands of paddy, greenhouse, upland and orchard land across the country, however, due to limitations in economic and manpower resources, it was deemed necessary to reduce sampling site to greenhouse soil. In this study, we try to investigate the applicability of cultivated crops as criteria for selecting representing fields in greenhouse soils.METHODS AND RESULTS: Soil samples were collected from red pepper, oriental melon, watermelon and strawberry cultivated soil. Principal components analysis (PCA) was performed on soil chemical properties of the selected fields: pH, electron conductivity (EC), available phosphate (Av-P₂O₅), organic matter (OM), and exchangeable cation (Ex.-K, Ca, and Mg). Soil chemical properties of oriental melon cultivated soil was separated from red pepper, watermelon, and strawberry cultivated soil on PC1 and red pepper cultivated soil was separated from watermelon cultivated soil on PC2. Position on PC1 was strongly correlated with pH, Ex.-Ca and Ex.-Mg and position on PC2 was strongly correlated with OM and Av-P₂O₅.CONCLUSION: The soil chemical properties of greenhouse soil was assorted amongst the different crops. Therefore, the cultivated crops as a criteria for the selection of representative field in greenhouse soil would be used in the future.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.502-507
• /
• 2016

This study was conducted to develop novel antimicrobial nano-composites, with the aim of fully utilizing antimicrobial properties of multi-walled carbon nanotubes (MWCNTs), nickel (Ni) and zinc oxide (ZnO). Ni coated-MWCNTs (Ni-CNT) were prepared and evaluated for their potential application as an antimicrobial material for inactivating bacteria. Field emission scanning electron microscopy (FE-SEM), and X-ray energy dispersive spectroscopy (EDS) were used to characterize the Ni coating and morphology of Ni-CNT. Staphylococcus aureus (S. aureus) and Escherichia coil (E. coil) were employed as the target bacterium on antimicrobial activities. Comparing with the nitric acid treated MWCNTs and Ni-CNT which have been previously reported to possess antimicrobial activity towards S. aureus and E. coil, Ni-CNT/ZnO exhibited a stronger antimicrobial ability. The nickel coating was confirmed to play an important role in the bactericidal action of Ni-CNTs/ZnO composites. Also, the addition of ZnO to the developed nanocomposite is suggested to improve the antimicrobial property.