• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.5
• /
• pp.131-136
• /
• 2018

Research on space development and satellites is being actively pursued. An interesting field is the study of reliable low-cost space launch vehicles. Since chemical fuel-based launching systems are expensive and take a lot of time and cost to maintain, the EML system, which is an electromagnetic force launching apparatus, is attracting attention. The EML system converts electrical energy stored in a capacitor into magnetic energy, and converts magnetic energy into mechanical kinetic energy, thereby accelerating the projectile. Although studies are actively conducted in the field, it is difficult to solve the equation because the impedance and speedance change with time and the nonlinearity is strong. Many researchers have solved this equation in a variety of methods. In this paper, the velocity analysis of the projectile was carried out by FEM (finite element method) using the commercial electromagnetic analysis program MAXWELL.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.3
• /
• pp.77-83
• /
• 1993

The goal of this research is to get a measuring system for absorption characteristics over the frequency band with 30MHz to 1, 000MHz concerning the ferrite electromagnetic wave absorbers, for example, grid-type and sintered flat type, etc. It is, however, very difficult to measure the absorption characteristics as in low frequency as in 30 MHz. In this research, therefore, we propose a standing wave method using parallel striplines, fabricate the measuring system, and measure the characteristic of ferrite microwave absorbers using the proposed mea-suring system.

• Journal of electromagnetic engineering and science
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2005

The implementation of a simple analog in-phase combiner is presented for a high capacity radio relay system with space diversity. It provides good performance in terms of simple hardware and easy control, and measured results are in good agreement with simulated ones. To suggest practical applications, signatures with/without diversity are measured for STM-1 signal of 64-QAM radio relay system combined with a 13-tap equalizer, and they provided more than 25 dB fade depth at 10$^{-3}$ BER under the frequency selective fading condition.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2492-2494
• /
• 2004

A system, featuring the electromagnetic levitation actuator for control in the vertical direction, of active microvibration control was proposed. The main components of this system are a vibration isolation table with built-in acceleration sensors for detecting microvibration, electromagnetic levitation actuators with built-in permanent magnets and electromagnets, and a digital controller with high precision signal converters.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.58-62
• /
• 2001

본 논문에서는 IMT-2000 통신방식 중 cdma-2000 방식의 시스템을 이용하여 이동통신 단말기 RF System에 미치는 위상 잡음의 영향성을 분석하였다. cdma-2000의 표준안인 TIA/EIA에서 권고한 IS-98-C 를 기초로 하여 위상 잡음 특성의 요구 조건을 유도하였다. 현재 상용화 된 부품을 이용하여 RF 시스템을 설계하여 위상 잡음 특성을 분석하였고 시스템에 가장 큰 영향을 미치는 oscillator의 위상 잡음의 양을 변화시켜 시스템에 미치는 영향을 Constellation Diagram과 Eye Diagram으로 제시 하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.324-327
• /
• 2001

In this paper, a 24GHz FMCW radar system which measures the range and the relative velocity of a vehicle in close range is described. The intended ranging accuracy is 15cm and a possible system concept to achieve this objective is presented. The VCO nonlinearity correction method using a reference delay-line and the data extrapolation algorithms based on AR(autoregressive) model are applied. The implemented system shows relatively satisfactory results in ranging accuracy.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.155-158
• /
• 1997

In design of current transformer, equivalent circuit parameters is obtained by electromagnetic analysis and used circuit simulation. Precise core secton area and turns of coil can be determined by circuit analysis. Therefore exact design of current transformer is possible by field and circuit analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1437-1443
• /
• 2000

This paper considers a channel estimation technique in a wireless local area network (WLAN) system with complementary code keying (CCK) signaling over multipath fading channels. This scheme uses the maximum correlator output of RAKE receiver for the extraction of the channel parameters. The performance of the proposed detection technique is compared with that of a noncoherent detection technique, and a significant improvement of performance is observed in terms of the bit error probability.

• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.76-81
• /
• 2008

The vibration test system of satellite environment test dept. has been used successfully for the vibration tests of a majority of korean space programs. To meet the recent needs of large size test facility available for the vibrational tests of the huge launch vehicles and satellites, KARI have developed the large size multi-electromagnetic shaking system with $3{\times}3m$ head expander system. The new system will consist of three electromagnetic shakers which has 160 kN thrust force individually, and be able to sustain up to 8 tons test load and 300 kNm overturing moment. This paper describes the design components in the development process of multi-excitation shaker system.

• Journal of Magnetics
• /
• v.19 no.3
• /
• pp.300-308
• /
• 2014

This paper develops a moving-magnet electromagnetic actuator for fast steering mirror (FSM). The actuator achieves a reasonable compromise between voice coil actuator and piezoelectric actuator. The stroke of the actuator is between the strokes of a piezoelectric actuator and a voice coil actuator, and its force output is a linear function of air gap and excitation current within our FSM travel range. Additionally, the actuator is more reliable than voice coil actuator as the electrical connection in the actuator is static. Analytically modeling the actuator is difficult and time-consuming. Alternatively, numerous finite element simulations are carried out for the actuator analysis and design. According to the design results, a real prototype of the actuator is fabricated. An experimental test system is then built. Using the test system, the force output of the fabricated actuator is evaluated. The test results validate the actuator analysis and design.