• Korean Journal of Materials Research
• /
• v.9 no.11
• /
• pp.1144-1147
• /
• 1999

The effect of the heat treatment on electrochromic properties of $\textrm{MoO}_3$ thin films is investigated by studing optical modulation, optical density, response time, and cyclic voltammetry. From the results of XRD analysis, heat-treated at $450^{\circ}C$ in air for 1 hour Moo3 thin films are found to be crystalline while as-deposited and heat- treated at low temperature ($\leq\;300^{\circ}C$) film are amorphous. The electrochromic devices using as-deposited $\textrm{MoO}_3$ films exhibit good electrochromic properties compared to those using the heat treated $\textrm{MoO}_3$ films. It has shown that the heat-treatment affected the reversible color change and the electrochromic properties of $\textrm{MoO}_3$ films.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.221-226
• /
• 2000

After manufacturing the electrochromic device (structure: ITO glass/$WO_3$/electrolyte/$V_2O_5$/ITO;glass) by using of sol-gel process and evaporation, optical properties and migration effect were investigated. The result shows that electrochromic device with heat treated (at water vapor ambient, $500^{\circ}C$, 1 hour) sol-gel coated $WO_3$ and $V_2O_5$ films had the highest transmittance variance. Electrochromic devices are based on the reversible insertion of guest atoms into structure of the host solid. But after cyclic operation, we find that the tungsten in $WO_3$ film and the indium in ITO film were migrated with each other. For the purpose of blocking migration, tungsten barrier film is inserted between ITO and $WO_3$ film. The result of cyclic voltamogram and the Auger depth profile show that the peak separation of cyclic voltamogram is reduced to below 1/10 and we could effectively block the indium and tungsten migration that is caused by flow of Li ions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.166-166
• /
• 2015

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.303-304
• /
• 2003

Conducting polymers show several unique features, wherein electrical and optical properties change drastically during electrochemical reaction. By making use of these phenomena, several electronic devices have been fabricated, for instance, electrochromic displays, rechargeable batteries and electroplasticity memory devices. Electromechanical actuators using conducting polymers have been proposed by Baughman et. al [1]. (omitted)

• Membrane Journal
• /
• v.20 no.1
• /
• pp.8-12
• /
• 2010

Poly(3,4-ethylenedioxythiophene) (PEDOT), which has the highest stability in conducting polymer was employed to electrochromic (EC) film and studied about electrochromic properties according to the film fabrication method. PEDOT films were coated by two different methods, electropolymerization (EP) and vapor phase polymerization (VPP). Both of PEDOT films showed dark blue color at dedoped neutral state. Spectroelectrochemistry, switching ability and stability of the devices were investigated by UV-Vis Spectrophotometer and Cyclic voltammetry. Surface morphologies of the PEDOT VPP film at oxidized and reduced state were obtained by AFM. The average surface roughness of the PEDOT-VPP film was 50 nm and more homogeneous than that of the PEDOT-EP. The EC property from the PEDOT-VPP film was improved compared to that of the PEDOT-EP film, to show a response time of 1.5 sec, transmittancechange of 49%, and coloration efficiency of 402.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.405-410
• /
• 2011

A study on chemical vapor deposition(CVD) of $WO_3$ and the electrochromic properties of the CVD $WO_3$ films have been carried out. The crystalinity, purity, and growth rate of the films depending on substrate temperatures are investigated. The highest growth rate is $8{\mu}m/min$ at the substrate temperatures above $300^{\circ}C$ and the estimated activation energy for overall film growth is about 45.9 kJ/mol at the temperatures of $225{\sim}275^{\circ}C$, where the CVD process is controlled by a surface reaction kinetics. The films grown below $275^{\circ}C$ are amorphous, while those deposited above $300^{\circ}C$ are crystalline. The effects of thickness and deposition temperature of the $WO_3$ films on electrochromic activity are also investigated. The coloration efficiency of the films increases with increase in film thickness and decrease in deposition temperature.

• Membrane Journal
• /
• v.31 no.5
• /
• pp.333-342
• /
• 2021

A flexible electrochromic device (ECD) is a promising technology that is expected to be applied in various fields such as smart windows. Polymer electrolyte is an important component that determines the bleaching-coloration performance and physical stability of flexible ECDs. In this study, a pore-filled polymer electrolyte membrane (PFPEM) with excellent dimensional stability was developed to effectively fabricate flexible ECDs and improve durability. Polyvinyl acetate, which has excellent adhesion, and polyethylene glycol, which can improve ionic conductivity, were filled in the pores of a porous substrate made of polyethylene, which is inexpensive and has excellent physical and chemical stability. The optimal lithium salt (LiTFSI) content of the prepared PFPEM was determined at about 27 wt%, and it was confirmed to possess excellent dimensional stability, adhesive strength, and ion conductivity close to that of conventional polymer electrolytes. Although the visible light transmittance was lowered by the use of the porous substrate, it was expected to act as an advantage in the colored state.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1220-1222
• /
• 1995

In the design of a complementary electrochromic windows based on $WO_3/Li^+$ conducting electrolyte/$V_2O_5$ system, a characterization of electrochromic properties of $WO_3/V_2O_5$ complementary devices as a function of thickness combinations is necessary in order to predict such as the safe operating voltage, the optical modulation range and the optical switching response. In this paper, the effects of $WO_3\;and\;V_2O_5$ thin films thickness combinations on device performance were systematically investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.37-40
• /
• 2004

Electrochromic displays offer the possibility of providing high brightness in reflective mode due to the fact that no polarization of the incident or reflected light is required. The use of appropriately roughened reflective layers can enable the diffuse or Lambertian reflection of light. truly imitating the optical nature of paper as a reading medium. Furthermore, the use of an electrochromic system, essentially an electrochemical device, allows for the integration of charge storage layers, endowing such devices with an on-state memory and associated low power consumption. In this paper we describe the $NanoChromics^{TM}$ system and overview the several strategies employed towards the migration of this technology to flexible display formats.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.23-29
• /
• 2020

Electrochromic (EC) device is an element whose transmittance is changed by electrical energy. Coloring and decoloring states can be easily controlled and thus used in buildings and automobiles for energy saving. There exist several types of EC devices; EC using electrolytes, polymer dispersed liquid crystal (PDLC), and suspended particle device (SPD) using polarized molecules. However, these devices involve solutions such as electrolytes and liquid crystals, limiting their applications in high temperature environments. In this study, we have studied all-solid-state EC device based on Tin(IV) oxide (SnO₂). A coloring phase is achieved when electrons are accumulated in the ultraviolet (UV)-treated SnO₂ layer, whereas a decoloring mode is obtained when electrons are empty there. The UV treatment of SnO₂ layer brings in a number of localized states in the bandgap, which traps electrons near the conduction band. The SnO₂-based EC device shows a transmittance of 70.7% in the decoloring mode and 41% in the coloring mode at a voltage of 2.5 V. We have achieved a transmittance change as large as 29.7% at the wavelength of 550 nm. It also exhibits fast and stable driving characteristics, which have been demonstrated by the cyclic experiments of coloration and decoloration. It has also showed the memory effects induced by the insulating layer of titanium dioxide (TiO₂) and silicone (Si).