• 한국환경보건학회지
• /
• 제35권3호
• /
• pp.201-208
• /
• 2009

Oxidation of phenol in aqueous media by electro-Fenton process using Ru-Sn-Sb/graphite electrode has been studied. Hydrogen peroxide was electrically generated by reaction of dissolved oxygen in acidic solutions containing supporting electrolyte and $Fe^{2+}$ was added in aqueous media. Phenol degradation experiments were performed in the presence of electrolyte media at pH 3. Effect of operating parameters such as current, electrolyte type (NaCl, KCl and $Na_2SO_4$) and concentration, $Fe^{2+}$ concentration, air flow rate and phenol concentration were investigated to find the best experimental conditions for achieving overall phenol removal. Results showed that current of 2 A, NaCl electrolyte concentration of 2g/l, 0.5M concentration of $Fe^{2+}$, air flow rate of 1l/min were the best conditions for mineralization of the phenol by electro-Fenton.

• 한국표면공학회지
• /
• 제50권2호
• /
• pp.91-97
• /
• 2017

The aim of this paper is to investigate the characteristics of electrochemical corrosion with the plasma ion nitriding temperature for 16Cr-10Ni-2Mo stainless steel. The corrosion behavior was analyzed by means of galvanostatic experiment in natural seawater that applied various current density with plasma ion nitriding temperature parameters. In result of galvanostatic experiment, relatively less surface damage morphology and the less damage depth was observed at a nitrided temperature of $450^{\circ}C$ that measured the thickest nitrided layer(S-phase). On the other hand, the most damage depth and unified corrosion behavior presented at a temperature of $500^{\circ}C$.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.129-136
• /
• 2018

An accurate state-of-charge (SOC) estimation ensures the reliable and efficient operation of a lithium-ion battery management system. On the basis of a combined electrochemical model, this study adopts the forgetting factor least squares algorithm to identify battery parameters and eliminate the influence of test conditions. Then, it implements online SOC estimation with high accuracy and low run time by utilizing the low computational complexity of the unscented Kalman filter (UKF) and the rapid convergence of a particle filter (PF). The PF algorithm is adopted to decrease convergence time when the initial error is large; otherwise, the UKF algorithm is used to approximate the actual SOC with low computational complexity. The effect of the number of sampling particles in the PF is also evaluated. Finally, experimental results are used to verify the superiority of the combined method over other individual algorithms.

• 대한금속재료학회지
• /
• 제46권12호
• /
• pp.809-816
• /
• 2008

The influences of various parameters such as inclusions, surface roughness, exposed areas and chloride ion concentrations on the initiation of pitting of Fe-17Cr alloy were investigated, using micro-droplet cell technique. Micro-droplet cell allows one to align the micro-electrode to the desired spot of the working electrode and measure directly local currents with the potentiodynamic polarization. Micro electrochemical tests were carried out at the inclusions after EDX analysis of inclusion. EDX analysis identified inclusions as Cr-oxides. It was found that some active inclusions among Cr-oxide inclusions acted as initiation sites for pitting corrosion. In addition, the rougher surface and the denser chloride ion concentration offered easier pit initiation sites, causing the more susceptible to pitting corrosion.

• Bulletin of the Korean Chemical Society
• /
• 제15권6호
• /
• pp.456-460
• /
• 1994

Catalytic effects of various cobalt phenylporphyrin compounds on the reduction of thionyl chloride at glassy carbon electrode have been evaluated by determining kinetic parameters with cyclic voltammetric techniques. The concentration of catalysts and the electrode immersion time have been found to affect the catalyst performance strongly, leading to a conclusion that the compounds are first adsorbed at the electrode surface and act as catalysts. Significant improvements in cell performance have been noted in terms of both exchange rate constants of up to 3 times and current densities of up to 150% at glassy carbon electrode.

• Bulletin of the Korean Chemical Society
• /
• 제17권3호
• /
• pp.223-227
• /
• 1996

Catalytic effects of transition metal (Co2+, Ni2+) complexes of N,N-bis(salicylaldehyde)-o-phenylenediimine (SOPD), N,N-bis(salicylaldehyde)-m-phenylenediimine (SMPD), and N,N-bis(salicylaldehyde)-p-phenylenediimine (SPPD), on the reduction of thionyl chloride at glassy carbon electrode, are evaluated by determining the kinetic parameters with cyclic voltammetric technique. The charge transfer process for the reduction of thionyl chloride is strongly affected by the concentration of the catalysts. Some quadridentate Schiff base-M(Ⅱ) complexes show sizable catalytic activities for the reduction of thionyl chloride. Catalytic effects of [M(Ⅱ)(SOPD)] complexes are slightly larger compared to [M(Ⅱ)2(SMPD)2] and [M(Ⅱ)2(SPPD)2] complexes. On those electrodes deposited with the catalysts, the observed exchange rate constants (ko) are in the range of 0.89-2.28 × 10-7 cm/s, while it is 1.24 × 10-7 cm/s on the bare glassy carbon electrode.

• 전기화학회지
• /
• 제20권4호
• /
• pp.67-74
• /
• 2017

층상구조의 Ni-rich NCM계 양극활물질 $Li[Ni_xCo_{(1-x)/2}Mn_{(1-x)/2}]O_2$ ($x{\geq}0.6$)은 $LiCoO_2$ 대비 높은 에너지밀도와 가격 경쟁력의 장점을 가진다. Ni 함량에 비례하여 가역 방전용량이 증가하는 장점이 있는 반면, 합성 중에 발생하는 양이온 혼합으로 인해 안정적인 전기화학성능을 구현하기 어려운 문제가 있다. 본 연구에서는 합성 분위기, 리튬 원료물질, 합성 시간, 합성 온도, Li/M (M=transition metal) 비율 등의 다양한 합성조건을 변수로 하여 Ni 함량 증가에 따라 최적의 층상구조 Ni-rich NCM을 각각 합성하고 이에 대한 전기화학성능을 보고하였다. $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$ (NCM6)을 기준으로 Ni 함량이 증가한 $Li[Ni_{0.7}Co_{0.15}Mn_{0.15}]O_2$ (NCM7)와 $Li[Ni_{0.8}Co_{0.1}Mn_{0.1}]O_2$ (NCM8)의 합성시 전이금속 중 Ni의 비율이 증가함에 따라 양이온 혼합이 증가하는 것이 관찰되었고, 이는 전기화학 성능에 부정적인 영향을 끼치는 것으로 확인되었다. Ni 비율별 NCM에 대한 연구결과 비율 내확인한 최적의 조건에서 NCM6은 $180mAh{\cdot}g^{-1}$, 96.2% (50회), NCM7은 $187mAh{\cdot}g^{-1}$, 94.7% (50회), NCM8은 $201mAh{\cdot}g^{-1}$, 92.7% (50회)의 초기 방전용량 및 수명평가 후 용량유지율 값을 각각 구현하였다.

• 공업화학
• /
• 제21권6호
• /
• pp.689-693
• /
• 2010

톨루엔에 녹인 천연고무를 탄소가루의 결합재로 사용하여 바이오센서를 제작하였을 때, 반죽은 용매가 증발한 후 기계적 물성을 보였다. 이 특성은 탄소반죽전극 실용화의 선행 조건을 만족시키는 것으로, 이 특성의 활용성을 살펴보기 위하여 과산화수소 정량을 위한 바이오센서를 제작하고, 그것의 전기화학적인 정량 및 정성적 특성을 파악하기 위하여 여러 가지 속도론적 파라메타, 즉 대칭인자(0.37), 교환전류밀도($i_0$, $0.075mAcm^{-2}$), 이중층의 축전용량($C_d$, $9.7{\times}10^{-3}F$), 시간상수(${\tau}_A$, 0.92 s), 최대전류($i_{max}$, $5.92{\times}10^{-7}Acm^{-2}$), Michaelis 상수($K_M$, $1.99{\times}10^{-3}M$) 및 기타 상수들을 도출하였다. 이 실험적 결과는 천연고무가 탄소가루의 결합재로 활용될 수 있음을 보여 주었다.

• Corrosion Science and Technology
• /
• 제12권2호
• /
• pp.65-78
• /
• 2013

The present investigation deals with the corrosion inhibition of mild steel in 1M $H_2SO_4$ with 1, 4-dihydro pyridine and its derivatives prepared using microwave activation method. The synthesis of inhibitor was confirmed by IR spectra. The effect of 1, 4-dihydropyridine derivatives on the corrosion inhibition of mild steel in 1M $H_2SO_4$ was studied using weight loss and electrochemical polarization techniques. Influence of temperature (303-333K) and synergistic effect of halide ions ($I^-$, $Br^-$ and $Cl^-$) on the inhibition behaviour was also studied. Corrosion products on the metal surface were analyzed by scanning electron microscopy (SEM) and a possible mechanism of inhibition by the compounds is suggested. Thermodynamic parameters were calculated using weight loss data in order to elaborate the mechanism of corrosion inhibition. Polarization measurements revealed that the studied compounds acted as mixed type inhibitor but slightly anodic in nature. Electrochemical impedance measurements revealed that the compounds were adsorbed onto the carbon steel surface and the adsorption obeyed the Langmuir adsorption isotherm. The synergistic effect of halide ions on the IE increases with increase in concentration. The IE obtained from atomic absorption spectrophotometric studies was found to be in good agreement with that obtained from the conventional weight loss method. SEM revealed the information of a smooth, dense protective layer in presence of the inhibitors.

• 방사성폐기물학회지
• /
• 제12권3호
• /
• pp.245-251
• /
• 2014

사용후핵연료 파이로 공정은 전기화학 이론들에 기초하여 개발되고 있다. 공정 모사는 공정 개발과 실험데이터 해석에 주요한 방법 중 하나로 파이로 공정에서도 필요한 접근 방법 중 하나이다. 현재까지 파이로 공정의 공정 모사는 전해정련 공정 위주로 진행되어 왔으며 전해환원 공정에 대한 연구는 많지 않았다. 전해환원 공정은 전해정련 공정과 달리 기체 발생과 다공성 전극의 특징을 지니고 있기 때문에 공정 모사를 위한 모델 개발을 위해서는 이를 고려한 수식들이 필요하게 된다. 본 연구에서는 전기화학 셀 해석에 필요한 열역학, 물질전달, 반응공학 이론 중 전해환원 공정 모델 개발에 필요한 개념과 수식들을 정리하여 제시하였다. 전해환원 셀을 구분하여 각 부분에 적용해야하는 수식들을 나열했으며 각 부분들 연결에 사용되는 경계조건들 역시 제시하였다. 이들 수식들은 추후 모델 개발에 기초로 사용될 수 있으며 실험데이터와 결합시켜 결정되어야 하는 매개변수 파악에 활용될 수 있을 것으로 기대된다.