• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.6-9
• /
• 2000

This paper presents the detailed derivation of optimal nodal price for active power to regionally evaluate system loss and congestion cost. The method is to decompose them into different components corresponding to system loss, transmission congestion, voltage constraint, and so on. The decomposed information for nodal price can be used to provide economic signals for generation or transmission investment as well as to improve the efficient usage of power grid and congestion management. The result of case study on IEEE 30 bus system is reported to illustrate the proposed method.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.50-52
• /
• 2005

Research interests in PQ(Power Quality) measurement and monitoring system have been increased. This paper describes an experimental result for monitoring system that monitors power quality and undesirable accidents when distributed generations are connected to the power grid. Prior to develop a physical monitoring system for distributed generation applications, we constitute a mesuring system for the general PQ factors. In this paper, an approach to how to measure the PQ elements is presented by using TMS320C6701 processor. Simulation results using the PSCAD and the power system simulation equipment Dobel have verified the proposed measurement system.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1536-1540
• /
• 1996

The Design of are quenching parts of molded case circuit breakers depends on the utilization of strength and distribution of the magnetic field by which the arc is forced. The magnetic field causes the are to move into a set of V-slotted iron grids, where the are is extinguished rapidly. This paper present the effective method 10 design V-slotted iron plates of the are breaking chamber of molded case circuit breakers. This magnetic force was calculated by using the flux densities in the arc which are obtained by three dimensional finite element method, as a result of that this paper verified by testing that a grid model which has biggest magnetic force is excellent in the are quenching ability.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.201-204
• /
• 2004

Consider the optimal design for PV system, it is apply to 3kW interconnected electric power PV system, that is a point of reference for 3kW PV the spread residential section system. Through the driving various practical system, we look into that for efficiency of generation and stability of interconnected system. Using obtained data acquisition, It can be suggest that installation and management for system parameter to optimal design maximum generation electric power. PV system have some losses that are variation radiation, shadow, change temperature, unbalanced grid connection, serial circuit loss, MPP deference loss, PCS loss and so forth. Using obtained various performance characteristic result, we can make database in the future, through the this study, we can get the reliance and have regard to spread PV system.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.205-207
• /
• 2004

This paper presents experimental operation with utility invertactive 3kW photovoltaic generation system. And that describe configuration of utility interactive photovoltaic system which power supply for Demonstration experiment. The status of photovoltaic generation system components and interconnection and safety equipment will be summarized. This paper discusses property operation state which system endure division of power for demonstration experiment.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.21-22
• /
• 2008

The increase of fault current due to larger power demand has caused the capacity of power machines in grid to increase. To protect the power system effectively from the increased fault current, the superconducting fault current limiter (SFCL) have proposed one of several countermeasures. Therefore, to introduce SFCL into power distribution system, the position of SFCL in power distribution system is selected among some cases. Each position changes fault current limiting characteristics and SFCL's requirement. In this paper, the characteristics of limiting fault current according to installed SFCL's location in power distribution system.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.117-118
• /
• 2008

제3차 전력수급기본계획(산업자원부, '06.12 공고)확정 고시 후 한전에서는' 07.1월 장기 송변전설비계획(2006년${\sim}$2020년)을 수립하여 시행중에 있다. 이와 별도로 한전에서는 전력수요 포화 시점(2030년)에 전력계통 구성의 최종목표를 제시 하고자 장기 송변전설비 Master Plan을 수립하였다. 본 논문에서는 전력수요 포화 시점에 대비한 Master Plan 수립방향, 수립결과 분석, 기술적 문제점 및 대책(과도안정도, 고장전류)에 대해 개략적으로 설명하였다. 본 수립내용을 토대로 설비확충 계획 뿐만 아니라 정비계획을 종합한 기존설비 개선.정비 방안을 시행할 예정이다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.273-274
• /
• 2008

Recently, the most wide-area blackout in North America, Canada and Europe had shown us indirectly the importance of Wide-Area Power System Protection and had influence on the direction of domestic electric power industry. After reorganization of the electric power industry in 2001, market incentives controls the power generation, transmission and distribution rather than stability of power grid, and moreover it produce bad results like inefficient facility management and too much competition. In addition, we can easily predict the massive loss of social and economic when the wide-area outage occurs by north direction load flow which is a pending problems of domestic power system and in a changed industry likes hi-tech manufacture and information technology industries. This paper introduces the development of infra systems for prevent wide-area blackout in situations of the power system operations.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.476-477
• /
• 2008

초전도 소자만을 이용한 한류기는 여러 가지 해결해야할 비용적, 기술적 문제를 안고 있다. 이런 문제들에 대한 해결과 동시에 초전도 한류기의 실용화를 위해 하이브리드 방식의 한류기가 고안되었으며 이는 초전도 소자만을 이용한 한류기가 갖고 있는 많은 문제점들을 해결할 수 있다고 판단되는 한류 방식이다. 본 논문은 기존의 하이브리드 방식의 한류기를 바탕으로 하여 Phase Locked Loop(PLL, 위상동기회로)를 이용한 하이브리드 방식의 초전도 한류기를 제시하였다. 일정한 선로 임피던스를 갖는 계통에서 사고가 발생할 경우 고장전류와 정상 상태의 전류 사이에 위상차가 발생하게 되는데, 이 위상차를 PLL의 위상 검출 능력을 통해 검출함으로써 한류기로서 동작할 수 있도록 하였다. 제시된 하이브리드 한류기의 성능은 PSCAD/EMTDC를 이용한 시뮬레이션을 통해 일기무한모선 시스템에 대한 적용을 통해 평가하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.31-33
• /
• 2008

산업사회에서의 전력공급 계통은 설비고장이 발생할 경우 해당지역에 국한되어 정전이 발생하기 때문에 피해가 확산되거나 사회적인 이슈가 되지는 않았다. 광케이블을 이용한 정보통신사회가 구축되어 금융과 언론을 비롯한 대부분의 생활이 인터넷을 중심으로 진행되고 있고 향후 지식기반 사회로의 진전이 급속히 진전될 것에 대비하여 전력계통 설비와 운영 방법의 고도화가 필요하게 되었다. 전력IT는 현재의 전력설비와 네트워크, IT를 이용하여 더욱 심층적인 연구가 진행되고 있으며 본 논문에서는 전력IT 연구과제 결과물의 활용성을 높이고 기술개발 과정에서의 시행착오를 최소화하기 위해 총 10개 과제를 하나로 운영할 경우를 상정하여 연구에 필요한 기술체계 모형을 개발하였고 이 모형을 토대로 향후 분산형 전원을 포함한 전력계통의 최적운영과 고장예측기법을 이용한 설비관리로 정전을 예방하여 최고품질의 전력을 공급하는데 기여하고자 하였다. 이 논문은 전력IT의 도입배경과 현재까지의 연구 성과분석을 토대로 실 계통 검증 5단계와 기술체계 모형 그리고 통합운영시스템 개념도 제시 순으로 작성하였다.