• Transactions on Electrical and Electronic Materials
• /
• v.11 no.3
• /
• pp.126-129
• /
• 2010

(1-X) $(Na_{0.5}K_{0.5})NbO_3-X$ $K_4CuNb_8O_{23}$ (NKN-X KCN) ceramics were produced using the conventional solid state sintering method, and their sinterability and electric properties were investigated. The density, dielectric constant (${\varepsilon}_r$), piezoelectric constant $d_{33}$, electromechanical coupling factor $k_p$ and mechanical quality factor $Q_m$ value of the NKN ceramics depended upon the KCN content and the sintering temperature. In particular, the KCN addition to the NKN greatly improved the mechanical quality factor $Q_m$ value. The ceramic with X = 2.0 mol% sintered at $1,150^{\circ}C$ possesses the optimum properties (${\varepsilon}_r=241$, $d_{33}=78$, $k_p=0.34$ and $Q_m=1,121$). These results indicate that the ceramic is a promising candidate material for applications in lead free piezoelectric transformer and filter materials.

• Journal of information and communication convergence engineering
• /
• v.19 no.2
• /
• pp.93-101
• /
• 2021

Cardiac arrhythmias are common heart diseases and generally cause sudden cardiac death. Electrocardiogram (ECG) is an effective tool that can reveal the electrical activity of the heart and diagnose cardiac arrhythmias. We propose detection of P waves based on QRST cancellation zero-one substitution. After preprocessing, the QRST segment is determined by detecting the Q wave start point and T wave end point separately. The Q wave start point is detected by digital analyses of the QRS complex width, and the T wave end point is detected by computation of an indicator related to the area covered by the T wave curve. Then, we determine whether the sampled value of the signal is in the interval of the QRST segment and substitute zero or one for the value to cancel the QRST segment. Finally, the maximum amplitude is selected as the peak of the P wave in each RR interval of the residual signal. The average detection rate for the QT database was 97.67%.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.166-175
• /
• 2023

Reinforcement learning can be applied to a wide variety of problems. However, the fundamental limitation of reinforcement learning is that it is difficult to derive an answer within a given time because the problems in the real world are too complex. Then, with the development of neural network technology, research on deep reinforcement learning that combines deep learning with reinforcement learning is receiving lots of attention. In this paper, two types of neural networks are combined with reinforcement learning and their characteristics were compared and analyzed with existing value-based reinforcement learning algorithms. Two types of neural networks are FNN and CNN, and existing reinforcement learning algorithms are SARSA and Q-learning.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.481-485
• /
• 2004

0.91 (PSN-PZT) －0.05BF －0.04PNW＋0.3wt%MnO$_2$＋0.6wt%CuO＋xwt%CeO$_2$ ceramics were fabricated with the variations of CeO$_2$addition at the sintering temperature of 95$0^{\circ}C$ and their microstructure, dielectric and piezoelectric characteristics were investigated. As the amount of CeO$_2$ addition increased, the grain size, density and electromechanical coupling factor(k$_{p}$) were increased and the mechanical quality factor(Q$_{m}$ ) was decreased. At the 0.3 wt% CeO$_2$, the density, grain size, electromechanical coupling factor(k$_{p}$), and pizoelectric constants(d$_{33}$, g$_{33}$) showed the maximum value of 7.87 g/㎤, 3.22 $\mu\textrm{m}$, 0.5, 289 pC/N, and 22.2 ㎷ㆍm/N, respectively. However, mechanical quality factor(Q$_{m}$ ) showed the minimum value of 807 at the 0.5 wt% CeO$_2$.$.EX>.EX>.

• Journal of electromagnetic engineering and science
• /
• v.4 no.1
• /
• pp.30-36
• /
• 2004

We determined equivalent circuit parameters of a 1.5 cell S-band RF gun cavity from the resonant characteristics of its decoupled cavities(half cell and full cell) using the code SUPERFISH. Equivalent circuit parameters of the 1.5 cell RF gun cavity resonated in the 0-mode were obtained easily from the circuit parameters of each decoupled cavities. In order to obtain equivalent circuit parameters for the $\pi$ -mode cavity, we calculated the differences of the resonant frequencies and the equivalent resistances between the 0- and $\pi$ -modes with slight variations of the radius and thickness of the coupling iris. From those differences, we obtained R/Q value and equivalent resistance of the $\pi$ -mode, which are directly related to the equivalent circuit parameters of the coupled cavity. Using calculated R/Q value, we can express equivalent inductance, capacitance and resistances of the RF gun cavity resonated in the $\pi$ -mode, which can be useful for analyzing coupled cavities in a steady state.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1031-1033
• /
• 1995

The microwave dielectric properties of (1-x)$LaAlO_3-xCaTiO_3$ system were investigated. As the amount of $LaAlO_3$ increased, the value of the unloaded Q increased, but the dielectric constant(${\varepsilon}_r$) decreased. The temperature coefficient of resonant frequency(${\tau}_f$) of $5ppm/^{\circ}C$ was obtained from the composition of $0.35LaAlO_3-0.65CaTiO_3$ in which the values of ${\varepsilon}_r$ and $Q{\cdot}f_o$ were 42 and 32,500, respectively.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.4
• /
• pp.172-177
• /
• 2006

During normal machine operation, partial discharge(PD) tests were performed with partial discharge analyzer(PDA) in two hydrogenerators. Six cable couplers were installed in circuit ring bus and endwinding of three phases. PDA showed that the normalized quantity number(NQN) and the partial discharge magnitude$(Q_m)$ were very low in hydrogenerator #1 and #2, respectively. The trend analyses of NQN and $Q_m$ value are available for monitoring of the insulation condition in hydrogenerator stator windings. The insulation condition of stator winding can be assessed. Discharge at conductor surface was discovered in B phase(C2 coupler) of hydrogenerator #1. Internal discharges were generated in A and C phases(C2 coupler) of hydrogenerator #1 and in A, Band C phases(C1 and C2 couplers) of hydrogenerator #2. Slot discharges occurred in A, Band C phases(C1 coupler) of hydrogenerator #1. The stator windings of two hydrogenerators were in good condition.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.1967-1971
• /
• 2007

In this paper, we verified basic forms and equivalent circuits of spiral inductors and various kinds of parasitics of equivalent circuits by using HFSS and Nexxim program that were 3-D EM analysis tools, and fabrication on-chip spiral inductors using Hynix's 0.25um 1-poly and 5-metal CMOS process. Comparing with PGS(patterned ground shield) and NPGS(non patterned ground shield) of spiral inductors of 3.5 turn, 4.5 turn and 5.5 turn, etc, the application of PGS could improve maximum Q value by 8-12%.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.3
• /
• pp.442-446
• /
• 1994

In this study, microwave dielectric properties of 0.182BaO-0.818TiOS12T ceramics were investigated with sintering temperature and annealing time, and the application for the microwave dielectric resonator was studied. In the specimen simtered at 1400[$^{\circ}C$], dielectric constant, unloaded Q and temperature coefficient of resonant frequency had good values of 35.36, 5692, -4.43[ppm/$^{\circ}C$], respectively. The specimen which temperature coefficient of resonant frequency($\tau$f) was vared positive to negative value was selected, thereafter microwave dielctric properties was investigated with annealing time(0~4[hr]) in the fixed annealing temperature of 1350[$^{\circ}C$]. Increasing the annealing time, dielectric constant and unloaded Q were increased and temperature coefficient of resonant frequency was decreased.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.4
• /
• pp.217-221
• /
• 2016

In this work, open and short stubs that were fabricated on the silicon substrate and for which the periodically arrayed grounded-strip structure (PAGS) was employed were studied along with their basic RF characteristics for an applicability regarding the RF-matching components. The PAGS-employing open and short stubs showed losses that are much lower than that of the conventional stub on the silicon substrate. Concretely, the Q values of the open and short stubs are 9 and 10.2, respectively, while the Q value of the conventional open stub is 2.5. With the use of the PAGS-employing open and short stubs, a highly miniaturized harmonic-rejection filter was also fabricated on the silicon substrate. The filter exhibited a comparatively sound harmonic-suppression characteristic at n × 13 GHz, and its size is 0.1 mm², which is only 7% of the size of the conventional filter on the silicon substrate.