• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1782-1784
• /
• 1998

The effect of magnetic field was measured on NOx removal for cylinderical-wire plasma reactor with magnetic field applied to electric field vertically. Consumption power increased with increasing discharge voltage. When magnetic field was applied to electric field vertically, consumption power decreased NOx removal rate of plasma reactor with magnetic field were higher, 10-15%, than that of plsama reactor without magnetic field. And NOx removal rate decreased with increasing gas flow rate.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1642-1644
• /
• 1997

The simulation study of lightning faults reducing effects by the installation of surge arresters on the 154 kV transmission line is stated here. For the purpose of detailed simulation of arcing horn, a flashover model with dynamic characteristics of arcing horn gap was represented as a non-linear inductance which is controlled by EMTP/TACS(Electromagnetic Transient Program/fransient Analysis of Control Systems) switches. The back flashover inducing current was increased from 50 kA to 88 kA by the installation of surge arresters on the transmission line which has one ground wire and 20 ohms of tower footing resistances. The great advantage of surge arrester installation on one circuit of the double circuit transmission line is to prevent the simultaneous back flashover up to 190 kA.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1871-1873
• /
• 2000

There are many electrical accidents between bare wire and line post insulator which is degraded by long time using, causing leakage current on the surface of insulator. In this paper it is presented that the 22.9 Kv-y distribution lines are protected by binding cover which is needed from fog or rainy moisture, surges occurring by switching or lightening pulse. It is analyzed to investigate the unbalanced transfer characteristics and reflection coefficient by using binding cover and non-cover. It was tested the radio interference voltage in the test room and electric field strength by calculation between binding cover and non-cover. In the factory the leakage current causing on the surface of insulator was tested in the state of light load and heavy load.

• 설비공학논문집
• /
• 제13권12호
• /
• pp.1205-1213
• /
• 2001

The electrical characteristics and particle collection efficiency of a wide-plate spacing electrostatic precipitator are numerically investigated, and the results are compared with those obtained experimentally. The electric potential and field strength near the collection plate increase with increasing the plate spacing. The electric field strength of a discharge electrode of a twisted pin type is larger than that of a rectangular type. As the roughness factor of the discharge electrode wire becomes small, or the plate spacing becomes narrow, the corona current of the precipitator increases. The numerical results agree well with those obtained from experimental method.

• International Journal of Railway
• /
• 제3권2호
• /
• pp.46-53
• /
• 2010

Electric railroad systems consist of rolling stock, track, signal and catenary system. In the catenary system, one of the most important factors is the impedance according to the design and characteristic. Before the catenary system is designed, the impedance should be precedently researched. The railroad catenary system is complex system which is composed by five conductors. The five conductors classify up and down feeders, up and down contact wire group, rail group. Therefore, we should compose the catenary system of the equivalent five-conductors model. In this paper, we suggest a geometrical model and a equivalent conductor model by using geometric mean radius of five conductors in the catenary system. Also, we calculate demanded parameter values in the model. By using those, line constants of five conductors are analyzed by applying the equivalent method called as the condensed joint matrix.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.104-108
• /
• 2004

The effect of magnetic field was measured on NOx removal for cylinder-wire plasma reactor with magnetic field applied to electric field vertically. Power was supplied to plasma reactor using rotating spark gap switch. Consumption power increased with increasing discharge voltage. When magnetic field was applied to electric field vertically, consumption power was less than that without magnetic field because of lorenz's force. NOx removal rate of plasma reactor with magnetic field were higher, 10-15%, than that of plsama reactor without magnetic field. And NOx removal rate decreased with increasing gas flow rate.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1753-1755
• /
• 2003

MOF insulating cover used in 22.9 kV substation hasn't shown good performance in terms of electrical safety because of its defect by short clearance MOF cover and each input and output wire junction part. The MOF cover is easily moved by outside environment as wind or rain weather because of different size MOF cover and insulating busing, also can be leaded to breakdown by tracking. Therefore, we propose MOF cover which effectively prevents from electrical accidents in this paper. To decrease the electric field concentrated on specific part, we roundly design the shape of MOF cover and clearance between cover and live part was adjusted to be longer than before. The proposed MOF cover is evaluated by using the electric field solution program.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.63-66
• /
• 2003

The electrophoretic deposition method has the advantage of relatively few fabrication facilities and simple process procedure as well as the economical and technical merit of allowing various forms of deposition and easy control of deposition thickness and wire length. A study, especially electric field and additive, on the optimization method to increase the density of particles and uniformity of their orientation have been performed to overcome the cracking and the porosity problems in the fabricated superconductor.

• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.751-757
• /
• 2018

In this article, a UV sensor that is an appropriate tool for fire detection has been designed and constructed. The structure of this UV sensor is an air-filled single-wire detector that is able to operate under normal air condition. A reflective CsI photocathode is installed at the end of the sensor chamber to generate photoelectrons in the ion chamber. An electric current is produced by accelerating photoelectrons to the anode in the electric field. The detector is able to measure the intensity of the incident UV rays whenever the current is sufficiently high. Therefore, the sensitivity coefficient of this sensor is found to be $7.67{\times}10^{-6}V/photons/sec$.

• 한국산학기술학회논문지
• /
• 제18권9호
• /
• pp.61-67
• /
• 2017

프레스금형 제작 시 사용목적에 맞는 적합한 소재선택과 빠른 가공방법에 대한 연구는 금형제작시간을 줄이고 금형원가를 절감하는데 절대적으로 필요한 연구분야이다. 특히 장수명 프레스금형을 개발하기 위해선 열에 대한 고찰이 반드시 이루어져야 한다. 일반적으로 프레스금형의 주요부품 소재로는 Cr, W계 저합금 공구강, 고탄소 고크롬강, 고속도강 등 냉간 금형용 합금공구강이 많이 쓰이고 있다. 프레스금형부품을 가공하는 데는 주로 공작기계와 와이어 컷 방전가공을 사용하고 있다. 가공공정에 따라 금형부품의 가공시간 및 수명이 많은 차이가 난다. 밀링가공과 연삭가공으로 제작된 부품의 경우 제작시간과 비용은 많이 드는데 비해 금형의 수명이 길고 밀링가공과 와이어 컷 방전가공을 사용하면 제작시간과 비용은 절감되는 반면 금형수명은 줄어드는 현상이 나타난다. 따라서 본 연구에선 가공시간과 비용이 절감되는 가공방법으로 열처리를 사용하여 금형의 사용수명을 향상시키는 방법에 대해 고찰하고자 한다. 밀링가공-연삭가공, 밀링가공-와이어 컷 방전가공, 밀링가공-와이어 컷-고온템퍼링, 3가지 가공방법으로 시편을 제작하여 가공표면과 중심부를 SEM, EDS분석 및 표면조도분석으로 문제점을 고찰하였고 밀링가공-와이어 컷 방전가공-고온템퍼링의 가공방법으로 밀링가공-연삭가공과 동일한 금형의 수명을 만드는 방법을 도출하였다.