• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.86-88
• /
• 2003

The efficiency of electric machine is important due to increase of interest about energy saving. Single Phase Line Start Permanent Magnet Synchronous Motor has high efficiency and power factor. LSPMSM offer a high efficiency as compared induction motor which are used in the home appliance. The analysis and design of LSPMSM is difficult because of unbalanced rotating magnetic field, nonlinear characteristics and rotor saliency. To consider these effects, F.E.M(Finite Element Methods) is coupled equivalent circuit methods. In this paper, a methods of analysis and design using F.E.M and equivalent circuit is represented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.113-115
• /
• 2003

Recently, many linear motion generators and are rapidly finding applications that ranges from short stroke linear motion vibrators, such as dynamic cone type loud speakers tostirling engine driven linear reciprocatings, alternators, compressors, textile machines etc. In this paper the dynamic performance with load is computed by a general purpose method, which the equation of electromagnetic field, the equation of electric circuit and the equation of motion are coupled together. We fumed out the driving system and the dynamic characteristics of current, voltage and displacement is confirmed experiment.

• 한국정보처리학회논문지
• /
• 제7권7호
• /
• pp.2135-2148
• /
• 2000

Developing network software in embedded systems, such as digital set-top boxes, requires coding under limited computing resources. This paper presents the porting of Point-to-point Protocol (PPP) software, PPPD, to an embedded system. The PPP is the most popular link layer protocol for the information appliance, to an embedded system. In order to achieve this, problems to be solved for the porting were identified and methods to solve the problems were described. First, PPP source codes were divided into modules. Next, functions of each module were analyzed and interfaces between the modules were delineated. With the analysis results, porting to the embedded system was described. The normal operation of the ported software was verified with the help of a network packet analyzer. Finally, experiences during the porting were presented. The method developed in th paper can be applied to the porting of software to an embedded system as well as the porting of network software.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1217-1222
• /
• 2013

It is very important to diminish noise source of electric motor systems that are used for home appliance area. We have studied on the noise reduction of BLDC motor, mainly focusing on reducing noise source from cogging torque. This noise source causes resonance of fan & motor systems. This study showed that the higher harmonic component of the cogging torque was the main factor for noise generation. Therefor, to reduce noise of bldc motor for refrigerator, this study suggested peanut shaped magnet which surface flux has similar sinusoidal wave form.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.816-821
• /
• 2002

It is getting more important that energy efficiency and manufacturing cost of the electric motor in appliance. The SRM has been alternative choice. But acoustic noise and harshness in this motor was widely known. So this paper had been studied on the noise reduction of a SRM in air conditioner. This works include some parameters regarding to blown noise sources like a reluctance torque ripple, air gap eccentricity, Especially, it was focused on dynamic characteristics of the system based on mechanical viewpoint. It came to successful results. Besides, this gave us a validity of phase excitation in experimental measurements.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 춘계 종합학술대회 논문집
• /
• pp.470-474
• /
• 2006

헤어드라이어의 경우 소비자들이 상품에 대한 충분한 지식을 갖고 구매를 하게 되므로 특별히 판매원의 의견과 서비스를 받지 않고 직접 선택하는 경향이 높아 상품의 포장과 라벨링이 매우 중요한 요소로 지적되고 있다. 본 개발에서는 기존의 금속 열선에서 벗어나 "세라믹 히터"를 이용하여 원적외선의 방사 및 고효율의 열량을 낼 수 있는 방법과 가전제품에서 가장 전자파가 발생되는 헤어드라이기에 전자파 차폐 기술을 적용하여 고성능 및 다기능성의 요구에 부합하고자 한다.

• 산업경영시스템학회지
• /
• 제23권61호
• /
• pp.75-87
• /
• 2000

This paper proposes a procedure for designing an accelerated test using SMAT(Stress, (failure) Mechanism and Test) model describing the relation among stress, failure mode/mechanism and test method. In SMAT model the stresses to be applied are derived from the environmental factor analysis, the relative importance of those stresses can be estimated using AHP(Analytic Hierarchy Process) and failure mode/mechanism and test method are derived from the fields failure information and FMEA(Failure Mode and Effect Analysis). By applying the procedure we can make a selection of major factors to cause the failure of assembly and design the accelerated test using DOE(Design of Experiments) The procedure is illustrated with an qualification test case study of washing machine shaft assembly in "A" electric appliance company.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.162-164
• /
• 2003

Spot welding, a kind of electric resistance welding, has been used in many fields such as automobile, aircraft, and appliance industry. This paper is to investigate the relationship between tensile shear strength and indentation depth under various welding conditions. The tensile shear strength increases with increasing the welding current in the range of 6-l3kA. The optimum welding conditions were 200∼250kg welding force and 10∼15 cycles welding time at 9kA welding current for EZNCEN. The indentation depth for optimum welding condition was 0.6mm at 9kA welding curent and 200kg welding force, 0.17mm at 9kA welding current and 300kg welding force, 0.19mm at 9kA welding current and 10cycle, 0.17mm at 9kA welding current and 15cycle welding time, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.896-897
• /
• 2008

홈넷기반 정보가전기기의 대기전력을 초절전칩을 적용하여 1W 이하로 줄이고, 가전기기에서 낭비되는 전력의 경로를 오토스위치를 통해 전력소모를 차단시키며, 홈플러그와 관리서버를 통해 전력낭비의 요소를 파악하여 전력소모를 저감하여 안전하고 쾌적한 홈오토메이션을 구현함으로써 인류의 행복추구를 목적으로 한다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 추계학술대회
• /
• pp.209-221
• /
• 2009

In the steel industry, steel is manufactured and processed to produce a variety of steel products. The industry provides fundamental materials to the whole range of industries including car, ship, electric appliance and construction industries, so that it is very important as an infrastructure industry. The steel manufacture process involves aerial work, many danger factors caused by the treatment with hazardous gases including BFG and COG and by high pressure gases including H2, O2, N2 and LPG. It requires the management over the large area because many workers work in a plant. The potential dangers in the steel plant were identified and the effect of the danger assessment was verified through the analysis of the danger assessment for the steel plant. The allowed degree of danger was lowered after the improvement through the danger assessment in the plant where the case studies were conducted, which indicates that the danger assessment is highly effective.