• 콘크리트학회논문집
• /
• 제12권4호
• /
• pp.59-67
• /
• 2000

With increased height of structure, the effect of column shortening need special consideration in the design and construction of high-rise buildings. The shortening of each column affects nonstructural members such as partitions, cladding, and M/E systems, which are not designed to carry gravity forces. The slabs and beams will tilt due to the cumulative differential shortening of adeacent vertical members. The main purpose of estimating the total shortening of vertical structural member is to compensate the differential shortening between adeacent members. This paper presents effect of parameters for phenomenon of column shortening in vertical members. The paper presents effect of parameters for phenomenon of column shortening in vertical members. The conclusions obtained from this study are follow as ; Strength of concrete and steel ratio effected on column shortening caused by elastic and inelastic shortening. Also, it is known that Ultimate-shrinkage-Value, Specific-Creep-Value, and volume to surface ratio effected on inelastic shortening only. Particularly, Ultimate-Shrinkage-Value and Specific-Creep-Value effected considerable on the amount of total column shortening.

• The Korean Journal of Physiology
• /
• 제28권1호
• /
• pp.61-70
• /
• 1994

A new method is used to record the actual shortening produced during the auxotonic activity of the sartorius (SAR), gastrocnemius (CAS) and rectus abdominis (RAB) muscles of a lizard Uromastix. The auxotonic twitch and tetanus records thus obtained were used for the first time to calculate the coefficient of linear shortening (COLS). This coefficient represent the relative Index between change in length $(\Delta\;L=L_0-L_1)$ and tension $({\Delta}P\;P_0-P_1)$ due to shortening at the steepest rising phase of the twitch and tetanus, recorded at resting length. In addition to this, maximum shortening $(S_{max})$ and auxotonic tensions were also determined at resting lengths of these muscles. The COLS was found to express the speed of shortening and auxotonic tensions are suggested to be of value to express the internal architecture of SAR, GAS & RAB muscles. The results are discussed in terms of contractile and elastic elements of the muscles alongwith the importance of shortening at resting lengths in skeletal muscles.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.258-266
• /
• 1996

The purpose of this study is to make a reasonable correction in construction stage through exact prediction of long-time differential column shortening that occurs in the high-rise RC building. For this, a self-developed program adopted PCA code is used to predict differential column shortening with sequential loading process. Using this program, the amount of the different column shortening of Amatapura Apartment in Indonesia is predicted and the effect is analyzed. From the result, the major factor affecting the shortening amount in columns is elastic strain and the effect of shrinkage is very small rather than creep. And maximun differential column shortening is appeared near the middle of the building.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.147-152
• /
• 2003

Passage of time axial shortening in the cores and columns of tall concrete buildings requires special attention to ensure proper behavior for strength of the structure and the nonstructural element. The effects of column shortening, both elastic and inelastic, take on added significance and need special consideration in design and construction with increased height of structures. In this paper, the compensation method of column shortening for reinforced concrete structure are introduced. It could be concluded that the survey is a significant factor for the compensation instance of column shortening.

• Advances in concrete construction
• /
• 제5권2호
• /
• pp.155-171
• /
• 2017

The phenomenon of concrete column shortening has been widely acknowledged since it first became apparent in the 1960s. Axial column shortening is due to the combined effect of elastic and inelastic deformations, shrinkage and creep. This study aims to investigate the effects of ambient temperature, relative humidity, cement hardening speed and aggregate type on concrete column shortening. The investigation was conducted using a column shortening prediction model which is underpinned by the Eurocode 2. Critical analysis and evaluation of the results showed that the concrete aggregate types used in the concrete have significant impact on column shortening. Generally, aggregates with higher moduli of elasticity hold the best results in terms of shortening. Cement type used is another significant factor, as using slow hardening cement gives better results compared to rapid hardening cement. This study also showed that environmental factors, namely, ambient temperature and relative humidity have less impact on column shortening.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.33-36
• /
• 2003

Time-dependent axial shortening in the cores and columns of tall concrete buildings requires special attention to ensure proper behavior for strength of the structure and the nonstructural clement. The effects of column shortening, both elastic and inelastic, take on added significance and need special consideration in design and construction with increased height of structures. In this paper, the compensation method of column shortening are introduced. It could be conclued that the survey is a significant factor for the compensation of column shortening.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.33-36
• /
• 2003

Time-dependent axial shortening in the cores and columns of tall concrete buildings requires special attention to ensure proper behavior for strength of the structure and the nonstructural element. The effects of column shortening, both elastic and inelastic, take on added significance and need special consideration in design and construction with increased height of structures. In this paper, the compensation method of column shortening are introduced. It could be concluded that the survey is a significant factor for the compensation of column shortening.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.132-142
• /
• 1996

This paper presents a technique to model and control a manipulator which has a flexible link and moves in a vertical plane. The flexible link is modeled as an Euler-Bernoulli Beam. Elastic deformation of the flexible link is represented using the assumed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. This paper presents a simple technique to improve the correctness of the developed model. The final model including the shortening effect due to elastic deformation correlates very well with experimental results. The free body motion simulation shows that two assumed modes for the representation of the elastic deformation is proper in terms of the model size and correctness. A control algorithm is developed using PID control technique. The proportional, integral and derivative control gains are determined based on dominant pole placement method with a rigid one-link manipulator. A position control simulation shows that the control algorithm can be used to control the position and residual oscillation of the flexible one-link manipulator effectively.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.208-215
• /
• 2018

기둥축소량을 발생시키는 원인과 현재까지 연구되어온 코드에 대하여 고찰하였다. 코드에서 언급하고 있는 내용들은공시체의 건조수축, 크리프, 압축강도 및 탄성계수 그리고 구조해석에서 산출되는 탄성변형을 다루고 있으나, 장기간의 모니터링에 의해 나타나는 온도에 의한 변형은 기존의 연구에 의해 발생되는 요소들에 의한 것보다 축소량이 적게 발생하는 것을 알 수 있었다. 하지만 기존의 연구에서는 온도에 의한 변형에 대해서는 고려하지 않고 건조수축, 크리프 및 탄성변형에 대하여 다루고 있는 것을 확인 할 수 있고, 공시체의 실험에 대해서는 온도에 대한 항목은 습도에 대한 항으로 대체하여 다루고 있음을 알 수 있다. 이에 대해 제안식에 의한 보정수치는 축소량 산정시 상부방향 4.9 mm 와하부방향 1.0 mm의 오차를 나타내어 측정에 의한 수치와 거의 일치하는 것으로 나타났다. 따라서, 기존의 기둥축소량 산정에 있어서 누락될 수 있는 온도에 대하여 추가적으로 더 연구하여 그 영향계수를(수직온도보정계수, ${\beta}_{vT}$) 고려하고, 공시체의 시험뿐만 아니라 구조체의 온도보정에 관한 기준 보완이 필요한 것으로 파악되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.397-402
• /
• 1998

The objectives of this paper are to estimate differential column Shortening and to determine appropreate compensation amount in 52 story Amatapura Apartment in Indonesia. for this, a computer program based on PCA and CEB-FIP code is developed. The results show that Elastic and Creep strain are the main factors of column shortening and the maximum differential shortening is appeared near the middle of the building height. The results between field survey and estimation have some difference, the most influential factor of the difference can be lateral restraints provided by horizontal members, which cannot be handled in this developed program. Hence introducing the modification factors from various field survey, this program can be used properly in design and construction procedures.