• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.95-103
• /
• 1994

The purpose of this paper is to provide the experimenters who use the oblique incidence ultrasonic method for anisotropic elastic constants measurement eith some useful relations. In particular, the equivalence of the times of flight by the energy ad phase velocities, which is key to the oblique incidence method, is proved explicitly. This equivalence greatly simplifies the analysis of immersion measurement results. In oredr to correctly measure the transit time of an immersed sample using the oblique incidence, the receiving transducer should be shifted laterally, and an expression in given for this shift. A method for determining all nine elastic constants of an orthotropic material is briefly described and the measurement results are listed for SiC particulate reinforced A1 matrix composites.

• Composites Research
• /
• 제17권2호
• /
• pp.9-14
• /
• 2004

본 연구는 FRP 보강 콘크리트 슬래브의 휨거동에 관한 이론적 연구로서 FRP 보강 콘크리트 슬래브를 구조적 직교이방성판으로 간주하고 고전적 직교이방성판이론에 따른 휨해석 및 유한요소해석을 수행하였다. FRP 보강 콘크리트 슬래브를 직교이방성판으로 모델링하기 위해서는 각 하중한대별로 실제 구조물의 거동에 부합하는 직교이방성판의 휨강성을 결정하는 것이 중요하다. 본 연구에서는 탄성등가법을 적용하여 FRP 보강 콘크리트 슬래브와 등가인 직교이방성판의 휨강성을 결정하였으며, 탄성등가법에 의해 결정된 휨강성을 사용하여 유한요소해석 수행을 위한 강성행렬의 결정방법을 제안하였다. 또한, 이론식에 의한 해석결과와 제안된 강성행렬을 사용하여 해석한 유한요소해석 결과를 실험결과와 비교하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.487-492
• /
• 1997

Two-way concrete slab is often modeled as an orthotropic plate. In the modeling, flexural rigidities of the slab which depend upon the re-bar quantity have to be taken into account. Elastic equivalence technique in which the equilibrium and compatibility of the cross-section of slab satisfied is utilized to determine th flexural rigidities. In the analysis Navier's method is applied on the concrete slab with all edges simply supported under inform lateral load. In addition to the analysis using orthotropic plate theory, finite element method is also adopted to suggest the finite element modeling and to investigate the applicability of the method. Results obtained by both methods were compared and it is observed that the difference of the results was increased as the ratio of re-bar quantity increased.

• Geomechanics and Engineering
• /
• 제15권2호
• /
• pp.745-754
• /
• 2018

In the analysis of the effects of rock tunnel blasting vibration on adjacent existing buildings, the model of simplified equivalent load produces higher calculation result of vibration, due to the lack of consideration of the millisecond delay effect. This paper, based on the static force equivalence principle of blasting load, proposes a new determination method of equivalent load of blasting vibration. The proposed method, based on the elastic-static force equivalence principle of stress wave, equals the blasting loads of several single blastholes in the same section of millisecond blasting to the triangle blasting load curve of the exploded equivalent elastic boundary surface. According to the attenuation law of stress wave, the attenuated equivalent triangle blasting load curve of the equivalent elastic boundary is applied on the tunnel excavation contour surface, obtaining the final applied equivalent load. Taking the millisecond delay time of different sections into account, the time-history curve of equivalent load of the whole section applied on the tunnel excavation contour surface can be obtained. Based on Sailing Tunnel with small spacing on Sanmenxia-Xichuan Expressway, an analysis on the blasting vibration response of the later and early stages of the tunnel construction is carried out through numerical simulation using the proposed equivalent load model considering millisecond delay effect and the simplified equivalent triangle load curve model respectively. The analysis of the numerical results comparing with the field monitoring ones shows that the calculation results obtained from the proposed equivalent load model are closer to the measured ones and more feasible.

• Nuclear Engineering and Technology
• /
• 제47권7호
• /
• pp.791-803
• /
• 2015

The effective cross sections (XSs) in the direct whole core calculation code nTRACER are evaluated by the equivalence theory-based resonance-integral-table method using the WIMS-based library as an alternative to the subgroup method. The background XSs, as well as the Dancoff correction factors, were evaluated by the enhanced neutron-current method. A method, with pointwise microscopic XSs on a union-lethargy grid, was used for the generation of resonance-interference factors (RIFs) for mixed resonant absorbers. This method was modified by the intermediate-resonance approximation by replacing the potential XSs for the non-absorbing moderator nuclides with the background XSs and neglecting the resonance-elastic scattering. The resonance-escape probability was implemented to incorporate the energy self-shielding effect in the spectrum. The XSs were improved using the proposed method as compared to the narrow resonance infinite massbased method. The RIFs were improved by 1% in $^{235}U$, 7% in $^{239}Pu$, and >2% in $^{240}Pu$. To account for thermal feedback, a new feature was incorporated with the interpolation of pre-generated RIFs at the multigroup level and the results compared with the conventional resonance-interference model. This method provided adequate results in terms of XSs and k-eff. The results were verified first by the comparison of RIFs with the exact RIFs, and then comparing the XSs with the McCARD calculations for the homogeneous configurations, with burned fuel containing a mixture of resonant nuclides at different burnups and temperatures. The RIFs and XSs for the mixture showed good agreement, which verified the accuracy of the RIF evaluation using the proposed method. The method was then verified by comparing the XSs for the virtual environment for reactor applicationbenchmark pin-cell problem, as well as the heterogeneous pin cell containing burned fuel with McCARD. The method works well for homogeneous, as well as heterogeneous configurations.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.291-311
• /
• 2006

The acceleration of consolidation by stone columns was mostly analysed within the framework of a basic unit cell model (i.e. a cylindrical soil body around a column). A method of converting the axisymmetric unit cell into the equivalent plane-strain model would be required for two-dimensional numerical modelling of multi-column field applications. This paper proposes two practical simplified conversion methods to obtain the equivalent plane-strain model of the unit cell, and investigates their applicability to multi-column reinforced ground. In the first conversion method, the soil permeability is matched according to an analytical equation, whereas in the second method, the column width is matched based on the equivalence of column area. The validity of these methods is tested by comparison with the numerical results of unit-cell simulations and with the field data from an embankment case history. The results show that for the case of linear-elastic material modelling, both methods produce reasonably accurate long-term consolidation settlements, whereas for the case of elasto-plastic material modelling, the second method is preferable as the first one gives erroneously lower long-term settlements, where plastic yielding of stone column are ignored.

• 한국전산구조공학회논문집
• /
• 제15권4호
• /
• pp.639-647
• /
• 2002

본 연구에서는 원주형 절취 독본(dogbonc) 내진 접합부 도입에 따른 철골모멘트골조의 횡강성 감소 정도를 용이하게 산정할 수 있는 실용적 해석기법을 제안하였다. 된 연구의 방안은 원래의 원주형 절취 형상의 독본에서 발생하는 신장량과 동일한 크기의 신장량이 유발되도록 등가의 균등한 유효폭을 갖는 독본 형상으로 치환하는 것에 근거하고 있다. 등가 유효폭을 도입하는 목적은 공액보법을 적용하여 보의 휨변형에 의한 골조의 횡변위 성분을 유도할 때 수행되는 전분을 해석적으로 하기 위함이다. 이러한 접근법의 타당성을 먼저 검증된 유한요소해석모델에 의해 확인한 후, 기둥, 패널존 그리고 보의 변형에서 기인하는 골조의 횡변위 성분을 독본의 존재를 고려하여 해석적으로 유도하였다. 이 유도결과를 이용한 사례분석에 의할 때, 독본의 도입에 따른 횡변위 증가율은 2%∼3%(횡강성 감소율로는 1%∼2%) 정도로서 실무적으로 무시할 수 있는 크기로 나타났다.

• 터널과지하공간
• /
• 제11권4호
• /
• pp.328-338
• /
• 2001

Fiber Glass Tube(FGT) 또는 steel pipe를 이용한 터널막장의 수평보강공법 그리고 강관다단공법 등은 터널 굴착시 터널막장의 안정성이 확보되지 못할 경우에 흔히 사용된다. 그러나 이러한 공법이 사용된 터널의 역학적 거동은 아직 충분히 알려진 바가 없으며, 따라서 설계와 전산해석 과정에서 경험에 의존하는 경우가 많고 공법의 합리적인 적용이 어려운 실정이다. 본 연구에서는 복합체 역학을 이용한 보강공법의 전산해석 단순화 방법의 적용성을 검증하였고, 강화지반의 등가탄성계수는 평균장 이론과 변형률 에너지 이론을 사용하여 도출하였다. 다양한 보강패턴에 따른 터널막장의 거동에 관한 매개변수 연구를 수행하였다.