• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.953-958
• /
• 1997

Corrugation of railway track can be caused by the various dynamic behaviors of traveling wheels and track. In this paper, the coupled vibrations of traveling wheel and railway track are analyzed as the cause of corrugations. To analyze the coupled vibration, the track supported by the sleepers and the traveling wheels are identified to the elastically supported infinite beam and the spring-mass system which runs at constant speed. The Hertzian contact spring is considered between the infinite beam and spring-mass system are calculated. The cause and development of rail corrugation are discussed in the view point of contact force fluctuation affected by the elastic supports and the corrugated surface profile on the track. By the obtained results, the possibilities of resonance are checked between the excitation by the corrugated surface profile and the natural frequency of contact spring-mass system. It may be thought to a development of railway corrugation.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.3
• /
• pp.19-26
• /
• 2001

In order to investigate the effect of single tensile overload on the short crack growth behavior under the out-of-plane cyclic bending moment, crack opening stresses were continuously measured by an elastic compliance method using strain gages. The characteristics of short crack growth after the single tensile overload are analyzed by the effective stress range ratio. Futhermore, the investigation was carried out with respect to various fatigue crack growth behaviors such as the plastic zone size effect on crack retardation, the retarded crack length and the number of cycles.

• International Journal of Korean Welding Society
• /
• v.3 no.1
• /
• pp.51-56
• /
• 2003

It is important to evaluate the fracture initiation behaviors of steel structure. It has been well known that the ductile cracking of steel would be accelerated by triaxial stress state. Recently, the characteristics of critical crack initiation of steels are quantitatively estimated using the two-parameters, that is, equivalent plastic strain and stress triaxiality, criterion. This study is paid to the fundamental clarification of the effect of notch radius, which can elevate plastic constraint due to heterogeneous plastic straining on critical condition to initiate ductile crack using two-parameters. Hense, the crack initiation testing were conducted under static loading using round bar specimens with circumferential notch. To evaluate the stress/strain state in the specimens was used thermal elastic-plastic FE-analysis. The result showed that equivalent plastic strain to initiate ductile crack expressed as a function of stress triaxiality obtained from the homogeneous specimens with circumferential notched under static loading. And it was evaluated that by using this two-parameters criterion, the critical crack initiation of homogeneous specimens under static loading.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.244-244
• /
• 2003

나노인덴테이션은 시편에 압자를 침투시켜 재료의 기계적 특성을 파악할 수 있는 경도시험법이다. 압입범위를 나노미터범위로 조절할 수 있어 기존에 접근할 수 없었던 극 미소부분에로 응용이 넓어지고 있다. 경도시험시 재료의 탄성 및 소성 작용에 의해 재료는 변형되고, 표면변화 관찰을 통해 표면아래 부분에서 이루어지고 있는 거동을 예측할 수 있다. 이러한 관점에서 나노인덴테이션 시험시에도 발생하는 파일업과 싱크인 현상에서 재료가 나노미터 범위에서 어떠한 양상으로 변형을 하는지를 고찰하는 것은 의미가 있을 것이다. 본 연구에서 파일업과 싱크인의 양상을 파악하고 그 양을 정량화하기 위하여 가공경화양에 따른 표면변화와 압입하중 변화에 따른 표면변화를 관찰하였다. 어닐링한 봉상 알루미늄을 압축변형을 0%, 5%, 20%, 40%, 50% 로 변형시켜 가공경화를 일으켰고, 표면은 전해연마하여 나노압입시험이 가능하도록 하였다. 각각의 시편을 나노인덴테이션 압입하중을 변화시켜 재료에서 하중 변화에 따라 나타나는 표면변화를 관찰하였고, 위의 각 조건에서 파일업양을 정량화 하였다. 연구결과에 대해 ANSYS 유한요소분석 프로그램을 사용하여 재료의 변형양상을 시뮬레이션 하였고, 실제 실험데이터와 비교 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2634-2645
• /
• 1993

Dome structures of pressure vessels subjected to internal pressure are usually analyzed by linear elastic theory assuming small deformation. Geometric and material nonlinear behaviors appear in actual dome structures because of large deformation and loads exceeding yield strength. In this paper, linear and nonlinear analyses were performed for various hemispherical and torispherical domes to check the effects of geometric and material nonliearity on the stress and displacement by the finite element method. The effect of the geometric nonlinearity decreased the stress levels a lot for very thin general torispherical domes, which enables more realistic and effective design. The material nonlinear effects are negligible for hemispherical and optimum torispherical domes, and those are large for most of the general torispherical domes.

• Journal of Mechanical Science and Technology
• /
• v.14 no.3
• /
• pp.291-297
• /
• 2000

Modern helicopter rotor blades with non-homogeneous cross sections, composed of anisotropic material, require highly sophisticated structural analysis because of various cross sectional geometry and material properties. They may be subjected by the combined axial, bending, and torsional loading, and the dynamic and static behaviors of rotor blades are seriously influenced by the structural coupling under rotating condition. To simplify the analysis procedure using one dimensional beam model, it is necessary to determine the principal coordinate of the rotor blade. In this study, a method for the determination of the principal coordinate including elastic and shear centers is presented, based upon continuum mechanics. The scheme is verified by comparing the results with confirmed experimental results.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.103-109
• /
• 2005

Since fretting fatigue damage accumulation occurs over relatively small volumes, the role of the microstructure is quite significant in fretting fatigue analysis. The heterogeneity of discrete grains and their crystallographic orientation can be accounted for using continuum crystallographic cyclic plasticity models. Such a constitutive law used in parametric studies of contact conditions may ultimately result in more thorough understanding of realistic fretting fatigue processes. The primary focus of this study is to explore the influence of microstructure as well as the magnitude of the normal force and tangential force amplitude during the fretting fatigue process. Fretting maps representing cyclic plastic strain behaviors are also developed to shed light on the cyclic deformation mechanisms.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.381-385
• /
• 1998

Vibration-resistant rubbers, whose elastic and shear behaviors are similar to viscoelastic materials, are used to make brace-typed dampers to reduce the building vibration. Experimental study is carried out to find the vibration characteristics of the dampers installed in the building model. The natural frequencies and modal damping ratios are obtained from the free vibration test and Fourier analysis. Analytical model of the modal strain energy method are used to find the viscoelastic characteristics of the brace-typed dampers from the experimental results. Finally shaking table test is performed to find the response behavior of the building model under earthquake loading. The present experimental study shows that the brace-typed dampers have the behavior of viscoelastic dampers, which increase the modal damping ratios and viscoelastic characteristics.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.177-186
• /
• 1999

Dynamic Characteristics of the bridge motions under seismic excitations are analyzed by adopting multi degree - of - freedom system to estimate the effect of restrainers. The applied restrainer is assumed to be a dead - band - system, which has the force clearance and the linear elastic force. The inelastic behaviors of pier and foundation motions are also considered in the study. It is found that the major effect of restrainer is to remarkably decrease the relative displacement between adjacent girders. It is found that restrainers placed on the parts of the bridge system rather than the whole system may increase the unseating failure.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.3
• /
• pp.53-61
• /
• 2020

This paper presents a systematic numerical analysis to obtain the re-centering and energy dissipation capacities of Chevron braced steel frames subjected to seismic loadings. In order to develop a recentering seismic resistance system excluding a residual deformation, the chevron braced steel frames are assembled using super-elastic SMA (Shape Memory Alloy) braces. The three-dimensional nonlinear finite element models are constructed to investigate the horizontal stiffness, hysteretic behaviors, and failure modes of the re-centering Chevron bracing system.