• Journal of the Korean Statistical Society
• /
• 제23권1호
• /
• pp.167-178
• /
• 1994

To estimate coefficient matrix in autoregressive model, usually ordinary least squares estimator or unconditional maximum likelihood estimator is used. It is unknown that for univariate AR(p) model, unconditional maximum likelihood estimator gives better power property that ordinary least squares estimator in testing for unit root with mean estimated. When autoregressive model contains multiple unit roots and unconditional likelihood function is used to estimate coefficient matrix, the seperation of nonstationary part and stationary part of the eigen-values in the estimated coefficient matrix in the limit is developed. This asymptotic property may give an idea to test for multiple unit roots.

• 한국공간구조학회논문집
• /
• 제2권3호
• /
• pp.71-79
• /
• 2002

The purpose of this paper is to study the buckling characteristics of elliptical latticed domes under conservative loading conditions. The latticed domes are usually designed in geometrically spherical shape. For this type of latticed domes, many researchers have researched and even the simplified estimation codes for the buckling load level have been available. However, geometrically elliptical latticed domes have been often constructed, and show different buckling characteristics following with geometrical parameters as rise-to-span ratio and so on. Therefore, it is necessary to investigate the general tendency of buckling characteristics of the elliptical latticed domes. In this paper, to find out some buckling characteristics of elliptical latticed domes, height, boundary configuration and gap are used as the shape coefficients. For each model with different parameters, the eigen values and the buckling loads are evaluated.

• Journal of Preventive Medicine and Public Health
• /
• 제18권1호
• /
• pp.149-156
• /
• 1985

By using Factor analysis on the variables relating to the subjective symptoms of total 56 workers, who have exposed to mixture of organic solvents at the musical instrument manufacturing plant, as experinmental group, and 70 workers, who worked in noisy working environment as control group, the study was performed. It was confirmed that the variables found in hematological figures, age specification, occupational history and physical examination have a influential factor on the subjective symptoms of both groups. It was explicated that the ratio of these to total Eigen Values showed 31.1 percent in experimental group and the control group revealed 37.7 percent.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제17권1호
• /
• pp.1-15
• /
• 2013

In this paper the three dimensional wave propagation in a homogeneous isotropic thermo elastic cylindrical panel embedded in an elastic medium (Winkler model) is investigated in the context of the L-S (Lord-Shulman) theory of generalized thermo elasticity. The analysis is carried out by introducing three displacement functions so that the equations of motion are uncoupled and simplified. A Bessel function solution with complex arguments is then directly used for the case of complex Eigen values. This type of study is important for design of structures in atomic reactors, steam turbines, wave loading on submarine, the impact loading due to superfast train and jets and other devices operating at elevated temperature. In order to illustrate theoretical development, numerical solutions are obtained and presented graphically for a zinc material with the support of MATLAB.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.679-685
• /
• 2003

Rotem has been using VAMPIRE for simulation and verification of the railway vehicle design. To improve the capability and accuracy of the analysis ability, ADAMS/Rail has been chosen as the next generation analysis tool. The dynamic performance of the railway vehicle, which is designed and manufactured by Rotem, is analyzed and simulated using ADAMS/Rail. The critical speed for linear and non-linear stability on tangent track, curving performance on various curved tractk, ride quality, derailment coefficient and the eigen values are calculated. In this paper, the results from ABAMS/Rail are compared with VAMPIRE's results.

• 한국연소학회지
• /
• 제18권2호
• /
• pp.42-50
• /
• 2013

Linear stability analysis of radiating counterflow diffusion flames is numerically conducted to examine the instability characteristics of cellular patterns. Lewis number is assumed to be 0.5 to consider diffusional-thermal instability. Near kinetic limit extinction regime, growth rates of disturbances always have real eigen-values and neutral stability condition of planar disturbances perfectly falls into quasi-steady extinction. Cellular instability of disturbance with transverse direction occurs just before steady extinction. However, near radiative limit extinction regime, the eigenvalues are complex and pulsating instability of planar disturbances appears prior to steady extinction. Cellular instability occurs before the onset of planar pulsating instability, which means the extension of flammability.

• Computers and Concrete
• /
• 제31권1호
• /
• pp.1-7
• /
• 2023

In this paper, Timoshenko-beam model is developed for the vibration of double carbon nanotubes. The resulting frequencies are gained for axial wave mode and length-to-diameter ratios. The natural frequency becomes more prominent for lower length-to-diameter ratios and diminished for higher ratios. The converse behavior is observed for axial wave mode with clamped-clamped and clamped-free boundary conditions. The frequencies of clamped-free are lower than that of clamped-clamped boundary condition. The eigen solution is obtained to extract the frequencies of double walled carbon nanotubes using Galerkin's method through axial deformation function. Computer softer MATLAB is used for formation of frequency values. The frequency data is compared with available literature and found to be in agreement.

• Computers and Concrete
• /
• 제32권3호
• /
• pp.303-311
• /
• 2023

An analysis of the Poisson's ratios influence of single walled carbon nanotubes (SWCNTs) based on Sander's shell theory is carried out. The effect of Poisson's ratio, boundary conditions and different armchairs SWCNTs is discussed and studied. The Galerkin's method is applied to get the eigen values in matrix form. The obtained results shows that, the decrease in ratios of Poisson, the frequency increases. Poisson's ratio directly measures the deformation in the material. A high Poisson's ratio denotes that the material exhibits large elastic deformation. Due to these deformation frequencies of carbon nanotubes increases. The frequency value increases with the increase of indices of single walled carbon nanotubes. The prescribe boundary conditions used are simply supported and clamped simply supported. The Timoshenko beam model is used to compare the results. The present method should serve as bench mark results for agreeing the results of other models, with slightly different value of the natural frequencies.

• 풍력에너지저널
• /
• 제4권2호
• /
• pp.17-24
• /
• 2013

Idealized PID-controlled rotor-speed error for blade pitch control of wind turbines responds as a second-order system with natural frequency and damping ratio for closed-loop system. RISO National Laboratory has recommended specific natural frequency(=0.6 rad/s) and damping ratio(=0.7) for 2 MW wind turbine. The baseline controller for 5 MW wind turbine of NREL(National Renewable Energy Laboratory) is designed based on the same values of RISO recommendation. This study investigates the effect of the natural frequency and damping ratio of the controller for NREL 5 MW wind turbine. It is confirmed that RISO recommendation shall be tuned for each wind turbine.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.83-83
• /
• 2017

The National Agrobiodiversity Center (NAS, RDA, Republic of Korea) has continually collected new valuable genetic resources. In this study, we regenerated conserved kidney bean (Phaseolus vulgaris L.) germplasm which couldn't be available because of seed quantity and quality, and we also surveyed their morphological characters for the sustainable utilization. A total of 431 kidney bean accessions were regenerated and 18 morphological traits were surveyed according to the characterization guideline of RDA Genebank. Among the surveyed traits, flowering time ranged from May 23 to September 4 and 73.8% of tested accessions were mainly flowering in June. The maturity time ranged from July 1 to October 15 and main flowering time was July (91.4%). For plant type, 270 accs (62.6%) were climbing type followed by medium type of 86 accs (20.0%) and dwarf type of 65 accs (15.1%). The seed coat colors were various; yellow (34.6%), white (22.3%), brown (17.9%), red (10.7%), black (5.8%), violet (11%), pink (1.4%), navy (0.9%). Principal component analysis indicated that five principal components (PCs) with Eigen values >1 accounted for more than 65.8% variability. The first PC was more related to growth habits such as growth type, flowering time, and plant type. The second and third PCs showed higher values of the pigment characters such as seed coat color, flower color, and pod color. In fourth and fifty PCs, there were the higher positive values of the pod shapes. Our results provided insight into the characteristics kidney beans, thus the utilization basis of kidney beans might be elevated for bio-industry.