• Nuclear Engineering and Technology
• /
• v.44 no.5
• /
• pp.453-458
• /
• 2012

A major issue for all nuclear stakeholders is to keep the probability of circumstances that could lead to core damage as low as possible. In addition, for NPP, appropriate accident management provisions are to be implemented to limit the consequences associated with an accident. Development and application of L2 PSA is a structured way to demonstrate that such objectives are achieved. The paper presents the efforts recently done in Europe to harmonize some best-practices in that field, from research area to risk assessment. The Fukushima Daiichi accident reiterated the importance of these activities and the need to efficiently reinforce the NPP safety based on risk assessment conclusions. New perspectives in Europe are briefly presented.

• Journal of the Korean Home Economics Association
• /
• v.38 no.4
• /
• pp.85-98
• /
• 2000

PL law seeks consumers'just compensation and effective deterrence through shirting liability principle from negligence to strict liability. Impact analysis of Product Liability(PL) Low requires consumers' perspectives. This paper performed a policy delphi to predict the impact of PL law on consumers. The study surveyed the opinions of 30 specialists in PL area, ranging from government, officials, professors, researchers, consumer activists, to business executives, for three times. The consumer are as follows: first of all, PL law can contribute to damage compensation significantly in that it stimulates consumer complaints through non- court procedures. It is very unlikely that suits will be increased rapidly due to PL because of the current law environment. The degree of influence of PL law on damage compensation will very according to the content of PL law. Secondly, PL law can contribute to deterrence in that it encourages companies' efforts for product safety while it doesn't undermine consumers' attentions to safety. The influence on companies' efforts will vary according to the content of PL law.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.27-38
• /
• 2005

In manufacturing industry of the modem industrial society, people increasingly become concerned the awareness of safety increasingly although they have regarded production the most important factor. Even though, as people make efforts on accident preventions, the number of accidents is decreasing, fatal major industry accidents are rather thanincreasing so that the number of deaths has not decreased. Under these conditions, there is an attempt to introduce and perform the process safety management system as a means for keeping from major industry accidents. However, it leaves to be desired on the methods of measuring process safety in the general manufacturing industry, while it is available to do that in the chemistry industry. Therefore, in this paper, we analysis processes of manufacturing industry in safety point of view and suggest the technique efficiently measuring and managing each process. Proposed the technique shows that the specification on safety determines AHP weight through the managers of firms and each process is suggested by using normalized matrix.

• Journal of Food Hygiene and Safety
• /
• v.26 no.2
• /
• pp.171-181
• /
• 2011

Though food safety efforts of the government has been increasing, but the health hazards resulting from food does not stop and thus increases consumers' anxiety and distrust of government. For more reliable safety management, developing analysis and intake measurement methods and strengthening regulatory control with strict criteria is necessary. In addition, as not only the known hazards by now, but also unknown but obvious hazards are simultaneously ongoing in current environments, the unified risk management and health assessment for food, health food and medicines from the media is critical. As risks and damage to health may show up after a long time after exposure, preventive measures and strategies for safety control is also needed.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.2
• /
• pp.31-38
• /
• 2013

As people make efforts on accident prevention, the number of accidents has decreased over the years, however the number of fatal major industry accidents has rather increased, which resulted in the increase of the number of deaths in total. Under these conditions, there is an attempt to introduce and perform the safety vocational education system as a means for preventing major industry accidents. Therefore, in this paper, we analyse vocational education of manufacturing industry from the safety's point of view and suggest the efficient techniques measuring and managing each safety management. Proposed techniques show that the specification on safety determines weight through the managers of firms and each process is suggested by using SN ratio.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.2
• /
• pp.9-17
• /
• 2016

In addition to improving economic growth and development of advanced production technology brings many benefits to our society, but if the growth of this still has the shadow of accidents exists. In particular, the construction site has seen a significantly higher accident rate figures despite efforts on disaster prevention. Among the various methods of reducing the need for disaster safety education industry it has become very stressed its importance through many studies. When a disaster causes significant share of the construction industry due to the lack of educational causes, including technical causes, managerial causes, classification and educational causes of this ateumyeo safety awareness and knowledge account for large proportion. In the health and safety education, centered on the subjects of education supervisors will be able to reduce the real and effective industrial disaster education should be run.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.04a
• /
• pp.255-261
• /
• 2013

As people make efforts on accident prevention, the number of accidents is decreasing, fatal major industry accidents are rather than increasing so that the number of deaths has not decreased. Under these conditions, there is an attempt to introduce and perform the safety vacational education system as a means for keeping from major industry accidents. Therefore, in this paper, we analysis vacational education of manufacturing industry in safety point of view and suggest the technique efficiently measuring and managing each safety management. Proposed the technique shows that the specification on safety determines weight through the managers of firms and each process is suggested by using SN Ratio.

• Journal of the Korean Society of Safety
• /
• v.23 no.5
• /
• pp.35-42
• /
• 2008

There are many efforts toward the development of next generation gas safety management systems to improve the assurance, availability, and efficiency of the extant systems. Among them, the application of ubiquitous technology, such as RFID and USN, to the system is regarded as a promising approach for enabling such an innovation. Recently the ubiquitous technology became much affordable and available than before thanks to the reduced production cost and wide proliferation of the ubiquitous devices. In this paper, we analyze the core requirements for the next generation gas safety management systems based on the ubiquitous technology, and present an architectural design of a middleware to facilitate the realization of the system. We formally define an event model and present how to specify various situations related to gas safety management using the proposed event model.

• Nuclear Engineering and Technology
• /
• v.47 no.1
• /
• pp.33-46
• /
• 2015

During the past 10 years, the Korea Atomic Energy Research Institute (KAERI) has performed a study to control hydrogen gas in the containment of the nuclear power plants. Before the Fukushima accident, analytical activities for gas distribution analysis in experiments and plants were primarily conducted using a multidimensional code: the GASFLOW. After the Fukushima accident, the COM3D code, which can simulate a multidimensional hydrogen explosion, was introduced in 2013 to complete the multidimensional hydrogen analysis system. The code validation efforts of the multidimensional codes of the GASFLOW and the COM3D have continued to increase confidence in the use of codes using several international experimental data. The OpenFOAM has been preliminarily evaluated for APR1400 containment, based on experience from coded validation and the analysis of hydrogen distribution and explosion using the multidimensional codes, the GASFLOW and the COM3D. Hydrogen safety in nuclear power has become a much more important issue after the Fukushima event in which hydrogen explosions occurred. The KAERI is preparing a large-scale test that can be used to validate the performance of domestic passive autocatalytic recombiners (PARs) and can provide data for the validation of the severe accident code being developed in Korea.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.19-27
• /
• 2008

Since 1995, the facility of class 1 and 2, classified by law had been subject to system of post maintenance management where periodic safety inspection and diagnosis to identify any problems and to take appropriate measures as a matter of urgency. Although the standards and systems had been revised many times for continuous improvement due to surrounding environmental factors, the technical factors and other factors for improvements, continuous researches and efforts are needed to ensure even higher effectiveness. Furthermore, the consciousness of the management body that executes and implements such improvements for facility management is most important. Therefore in this study, through such analysis, more realistic management consciousness review was performed. Also the direction for improvements is proposed, to carry out more effective facility safety management systems implementation.