• The KIPS Transactions:PartA
• /
• v.16A no.1
• /
• pp.1-8
• /
• 2009

Ubiquitous computing requires an intelligent environment where the users do not need to be involved in the operation. The agent technology allows effective implementation of ubiquitous system, while agent platform provides efficient and stable interaction between the agents. In this paper we propose a hierarchical P2P networking approach where the messages are combined inside the agent platform and then compressed in two levels. The proposed approach capitalizes the static nature of the messages of typical context-aware applications. Experiment with an actual multi-agent system reveals that the response time and throughput are significantly improved compared to the existing scheme.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.3
• /
• pp.71-74
• /
• 2009

Electroplated Cu is a cost efficient metallization method in microelectronic packaging applications. Typically in 3-D chip staking technology, utilizing through silicon via (TSV), electroplated Cu metallization is inevitable for the throughput as well as reducing the cost of ownership (COO).To achieve a comparable film quality to sputtering or CVD, a pre-cleaning process as well as plating process is crucial. In this research, atmospheric plasma is employed to reduce the usage of chemicals, such as trichloroethylene (TCE) and sodium hydroxide (NaHO), by substituting the chemical assisted organic cleaning process with plasma surface treatment for Cu electroplating. By employing atmospheric plasma treatment, marginally acceptable electroplating and cleaning results are achieved without the use of hazardous chemicals. The experimental results show that the substitution of the chemical process with plasma treatment is plausible from an environmentally friendly aspect. In addition, plasma treatment on immersion Sn/Cu was also performed to find out the solderability of plasma treated Sn/Cu for practical industrial applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.70-75
• /
• 2005

The efficient hardware design of the the algorithm is important in wide variety of DSP. One example is OFDM(Orthogonal Frequency Division Multiplexing) based WLAN(Wireless Local Area Network) systems which place high requirements on throughput and power consumption on FFT. The output RAM is composed of two banks of $64{\times}W.$ The banks are swapped immediately following the falling edge or the start signal strobe. This bank swapping allows 64-Point FFT to continue Processing samples and to continue filling the alternative bank, without affecting the data flow outputs.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1833-1839
• /
• 2004

Recently mass spectrometry and separation methods such as liquid chromatography have become major tools in the field of proteomics. In this report, we describe in detail our efforts to develop ultra-high pressure capillary reverse-phase liquid chromatography (cRPLC) and its online coupling to a mass spectrometer by a nanoelectrospray (nanoESI) interface. The RPLC system is constructed in house to deliver LC solvents at the pressure up to 20,000 psig, which is four times higher than conventional RPLC systems. The high operation pressure allows the efficient use of packed micro-capillary columns (50, 75 and 150 ${\mu}$m i.d., up to 1.5 m long). We will discuss the effect of column diameter on the sensitivity of cRPLC/MS/MS experiments and the utility of the developed technique for proteome analysis by its application in the analysis of proteome samples having different levels of complexity.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.2 no.1
• /
• pp.33-45
• /
• 2015

To engineer tissue-like structures, cells are required to organize themselves into three-dimensional networks that mimic the native tissue micro-architecture. Here, we present agarose-based multi-well platform incorporated with electrical stimulation to build skeletal muscle-like tissues in a facile and highly reproducible fashion. Electrical stimulation of C2C12 cells encapsulated in collagen/matrigel hydrogels facilitated the formation 3D muscle tissues. Consequently, we confirmed the transcriptional upregulations of myogenic related genes in the electrical stimulation group compared to non-stimulated control group in our multi-well 3D culture platform. Given the robust fabrication, engineered muscle tissues in multi-well platform may find their use in high-throughput biological studies drug screenings.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.9-13
• /
• 2014

The performance of large scale software applications has been automatically increasing for last few decades under the influence of Moore's law - the number of transistors on a microprocessor roughly doubled every eighteen months. However, on-chip transistors limitations and heating issues led to the emergence of multicore processors. The energy efficient ARM based System-on-Chip (SoC) processors are being considered for future high performance computing systems. In this paper, we present a case study of two widely used parallel programming models i.e. MPI and MapReduce on distributed memory cluster of ARM SoC development boards. The case study application, Black-Scholes option pricing equation, was parallelized and evaluated in terms of power consumption and throughput. The results show that the Hadoop implementation has low instantaneous power consumption that of MPI, but MPI outperforms Hadoop implementation by a factor of 1.46 in terms of total power consumption to execution time ratio.

• ETRI Journal
• /
• v.31 no.2
• /
• pp.111-120
• /
• 2009

Network-on-chip (NoC) architecture provides a highper-formance communication infrastructure for system-on-chip designs. Circuit-switched networks guarantee transmission latency and throughput; hence, they are suitable for NoC architecture with real-time traffic. In this paper, we propose an efficient integrated scheme which automatically maps application tasks onto NoC tiles, establishes communication circuits, and allocates a proper bandwidth for each circuit. Simulation results show that the average waiting times of packets in a switch in $6{\times}6$6, $8{\times}8$, and $10{\times}10$ mesh NoC networks are 0.59, 0.62, and 0.61, respectively. The latency of circuits is significantly decreased. Furthermore, the buffer of a switch in NoC only needs to accommodate the data of one time slot. The cost of the switch in the circuit-switched network can be reduced using our scheme. Our design provides an effective solution for a critical step in NoC design.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.254-259
• /
• 2015

CABAC is a context-based adaptive binary arithmetic coding method. It increases the encoding efficiency by updating the probability based on the information of the previously coded symbols. Context modeler is a core block of CABAC, which designs a probability model according to the symbol considering statistical correlations. In this paper, an efficient hardware architecture of CABAC context modeler is proposed. The proposed context modeler was designed in Verilog HDL and it was implemented in 0.18 um technology. Its gate count is 29,832 gates including memory. Its operating speed and throughput are 200 MHz and 200 Mbin/s, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.17-22
• /
• 2011

The underwater environments are quite different from the terrestrial ones in terms of the communication channel and constrains. In underwater wireless sensor network, the probability of node failure is high because sensor nodes are deployed in more harsh environments than the ground based networks and moved by waves and currents. There are researches considering the communication environments of underwater to improve the data transmission throughput. In this paper, we present a checkpointing scheme of the cluster heads that recoveries from a cluster head failure quickly. Experimental results show that the proposed scheme enhances the reliability of the networks and more efficient in terms of the energy consumption and the recovery latency than without checkpointing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.782-792
• /
• 1997

Asynchronous transfer mode (ATM) provides the means to support with variety of multimedia serivices in broadband network. For the support of multimedia services, various data traffic with priortes should be controlled errectively and congestion function is required in the network to carry out the control operation. To accomplish this in a flexible and effective manner, priorty classes for the different services are commonly used. In this paper, we suggested a buffer managment algorithm in ATM network to improve overall network performance with separated buffer which consists of existing buffer with threshold andauxiliary buffer whose input consists of superposition of voice and data traffic. To evaluate the proposed buffer managment algorithms, simulations are excuted with two proiorities and the results are provied that network throughput is improved better than the existing parital buffer method.