• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.448-453
• /
• 2006

Electrical resistivity is an important property for the collection efficiency in the electrostatic precipitator. In this paper, electrical resistivities of tobacco dusts, yellow sand dusts and pine pollens are measured using a high voltage conductivity cell based on JIS B 9915. The resistivities of three kinds of indoor dusts are about $1{\times}10^7\;{\Omega}{\cdot}cm^2$ in the normal range and dust collection efficiency using an electrostatic precipitator at to face velocity of 1.0 m/s shows over 99% for the three kinds of indoor dusts.

• International Journal of High-Rise Buildings
• /
• v.12 no.4
• /
• pp.335-341
• /
• 2023

This study proposes a novel rotary direct evaporative cooler and investigates the potential of a moisture-wicking fabric as a cooling pad for the proposed evaporative cooler. The rotary direct evaporative cooler rotates the cooling pad to reduce the water and energy consumption of the pump compared to those of existing direct evaporative coolers. A moisture-wicking fabric is considered as the material of the cooling pad, because of its high moisture-wicking property, enhancing water evaporation. Experiments are performed under various inlet air conditions while measuring the air temperature, relative humidity, air velocity, and differential pressure. The evaporative cooling efficiency and impacts of the inlet air temperature and air velocity on the cooling performance are also evaluated. The results demonstrate the potential of the moisture-wicking fabric as cooling pad of direct evaporative cooler.

• International Journal of Advanced Culture Technology
• /
• v.8 no.1
• /
• pp.243-247
• /
• 2020

In the era of the fourth industrial revolution, safety of disasters is being emphasized above all else, and electric fires are most frequent during disasters, and human and property damage is very serious. In this paper, we propose a study that can determine the efficiency of evacuation and non-evacuation guidance due to the large difference in casualties depending on the traffic line in the case of fire. Evacuation guidance was assumed to be a situation in which adequate evacuation routes were guided by a recorded voice or a trained staff, and non-evacuation guidance was assumed to be a situation without anything. Evacuation simulations were carried out using a evacuation simulation tool called PATHFINDER and SIMULEX for the analysis of the efficiency of evacuation and non-evacuation guidance. As a result, the evacuation time was similar, but in the case of non-evacuation guidance, it was not guided to the safe zone, which could cause serious damage.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.4
• /
• pp.21-26
• /
• 2008

A method for processing huge airborne laser scanned data using parallel computing and virtual grid is proposed and the method is tested by generating raster DSM(Digital Surface Model) with IDW(Inverse Distance Weighting). Parallelism is involved for fast interpolation of huge point data and virtual grid is adopted for enhancing searching efficiency of irregularly distributed point data. Processing time was checked for the method using cluster constituted of one master node and six slave nodes, resulting in efficiency near to 1 and load scalability property. Also large data which cannot be processed with a sole system was processed with cluster system.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.1
• /
• pp.39-49
• /
• 2010

Drilling at unconsolidated layer can make the aquifer disturbed and reduce a productivity of groundwater well. Surge block and air surging were applied to a pumping well located in Jeungsan-ri, Changnyung-gun, to improve a well efficiency by removing clogging and fine-grained slime. Two experimental log-linear equations, $y_1=-0.1769\;ln(x_1)+0.4960$ and $y_2=-84.3358\;ln(x_2)+512.8162$, were proposed in this site, in which $x_1$ and $x_2$ are the number of surging event, $y_1$ is the amount of slime, and $y_2$ is a recovery time of groundwater level after air surging. Well loss exponent (P) decreased after surging, from 3.422 to 1.439, and the groundwater inflow from aquifer happened in all directions around a well with gradually increasing the homogeneity in a local aquifer's hydraulic property. It was revealed that long-term well development should be done in the pumping well which is located in unconsolidated sediments to increase a well productivity.

• Journal of Welding and Joining
• /
• v.21 no.4
• /
• pp.39-45
• /
• 2003

Nano-TiO$_2$ photocatalytic coatings were deposited on the stainless steel 304(50$\times$70$\times$3mm) by the APS(Atmospheric Plasma Spraying). Photocatlytic reaction was tested in MB(methylene blue) aqueous solution. For applying nano-TiO$_2$ powders by thermal spray, the starting nano-TiO$_2$ powder with 100% anatase crystalline was agglomerated by spray drying. Plasma second gas(H$_2$) flow rate and spraying distance were used as principal process parameters which are known to control heat enthalpy(heat input). The relationship between process parameters and the characteristics of microstructure such as the anatase phase fraction and grain size of the TiO$_2$ coatings were investigated. The photo-decomposition efficiency of TiO$_2$ coatings was evaluated by the kinetics of MB aqueous solution decomposition. It was found that the TiO$_2$ coating with a lower heat input condition had a higher anatase fraction, smaller anatase grain size and a better photo-decomposition efficiency.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.1
• /
• pp.56-64
• /
• 2014

The applicability of oil palm EFB(Empty Fiber Bunch) to the papermaking process as a functional organic filler was investigated in this study. Since the EFB has similar chemical composition to the lignocellulose materials such as wood fiber, the fines of EFB was applied to the handsheet paper as an alternative to wood powder which were used as an organic filler to improve water removal efficiency and bulk. The experiments showed that the EFB fines resulted in the higher water removal efficiency at the wet pressing process and leaded to the higher bulk than those of wood powder. In case of 10 % addition of organic filler, the strength properties were not significantly changed. Those results suggested that the EFB could be used as a new organic filler for improving water removal efficiency and bulk property.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.493-499
• /
• 2011

To improve the bandwidth efficiency of conventional orthogonal modulation, the MCTO(Multi-Code Trans-Orthogonal) modulation, which is modified orthogonal modulation, was proposed. However, the RF(Radio Frequency) power amplifier for the MCTO modulation is too complex to reject the amplitude distortion due to the non-constant amplitude property of the MCTO. Therefore, in this paper, CAMCTO(constant-amplitude multi-code trans-orthogonal) modulation is proposed by using the constant-amplitude encoding algorithm for multi-code signal. Additionally, the performance of the proposed CAMCTO modulation is compared with those of the orthogonal modulation and the MCTO modulation by using the computer simulation. The computer simulations show that the bandwidth efficiency of the proposed CAMCTO modulation is better than that of the conventional orthogonal modulation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.6
• /
• pp.511-517
• /
• 2008

The radiation characteristics and economic efficiency of high - luminance light - emitting diodes (LEDs), a metal halide lamp, and a halogen lamp were studied to evaluate their potential as an energy-saving light source for fishing lamps. The wavelengths at which irradiance was maximum were 709, 613, 473, 501, 525, 465, 578, and 973 nm for red, orange, blue, peacock blue, green, and white LEDs, the metal halide lamp, and the halogen lamp, respectively. If the irradiance characteristics at 300-1,100 nm wavelengths are set as 100%, the irradiance rates at 381-780 nm were 99-78%, 82%, and 24% for the LEDs, metal halide lamp, and halogen lamp, respectively. The economic efficiency was superior in the order metal halide lamp, halogen lamp, peacock blue LED, and blue LED at 381-780 nm and metal halide lamp, peacock blue LED, blue LED, and halogen lamp at 480-520 nm. Based on the radiation characteristics and economic efficiency evaluated at 480-520 nm, the blue and peacock blue LED light sources can be used as energy-saving light sources for fishing lamps.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.295-300
• /
• 2005

In this paper we have designed a two-stage Class I power amplifier operated at 2.4CHz for Class-1 Bluetooth application. The power amplifier employs class-I topology to exploit its soft-switching property for high efficiency. The latch-structured pre-amplifier with amplifiers makes its output signal as sharp as possible for soft switching of the next power amplifier. It improves the overall efficiency of the proposed power amplifier. It shows 65.8$\%$ PAE, 20dB power gain and 20dBm output power.