• 간호행정학회지
• /
• 제9권2호
• /
• pp.265-282
• /
• 2003

Purpose : This study was conducted to provide for a basic resource, which can be used to set up a efficient management system in Cardiac Surgery Intensive Care Units(CSICU). Method: 1) Questionnaires were administered and observation methods were used, to examine the nursing activities performed in the CSICU after having reviewed related literatures and a review by the experts. Thus, the nursing activities were designating 254 activities and classified into 28 categories. 2)The 22 nurses in the 2 CSICUs filled out questionnaires about nursing activities from 12 April, 2002 to 17 April, 2002. The frequency of the nursing activities in the 28 categories counted and new nursing activities added by directly observing 12 nurses by two trained research staffs for 4 day. 3)In terms of validity, the 264 nursing activities were analysed by the 25 experts. As a result, 231 nursing activities were found valid and remained as appropriate nursing activities to be used for the careful analysis of the nursing activities in CSICUs. Result: The 22 categories are as below: assessment, monitoring, respiration management, nutrition management, elimination/drainage management, mobility management, sanitation management, safety management, temperature management, specimens collection, preparation and assistance of treatment, skin/wound management, infection management, medication management, education/support, dying patient care, recording/keeping, supplies management, environment management, communications, evaluations, professional development Conclusion : The manifest job description of the staff nurse will contribute to improving the efficiency of the nursing activities and to reducing the role conflicts among the medical staffs.

• 조명전기설비학회논문지
• /
• 제29권4호
• /
• pp.1-10
• /
• 2015

The light emitting diodes(LED) package of new structure is proposed to promote the reliability and lifespan by maximize heat dissipation occurred on the chip. We designed and fabricated the LED packages mixing the advantages of chip on board(COB) based on conventional metal printed circuit board(PCB) and the merits of Si sub-mount using base as a substrate. The proposed LED package samples were selected for the superior efficiency of the material through the sealant properties, chip characteristics, and phosphor properties evaluations. Reliability test was conducted the thermal shock test and flux rate according to the usage time at room temperature, high-temperature operation, high-temperature operation, high-temperature storage, low-temperature storage, high-temperature and high-humidity storage. Reliability test result, the average flux rate was maintained at 97.04% for each items. Thus, the Si sub-mount based LED package is expected to be applicable to high power down-light type LED light sources.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.223-226
• /
• 2003

This paper presents a high-frequency ZVS-PWM boost chopper-fed DC-DC converter with a single active auxiliary edge-resonant snubber which is used for power conditioner such as solar photovoltaic generation and fuel cell generation. The experimental results of boost chopper fed ZVS-PWM DC-DC converter are evaluated. In audition to its switching voltage and current waveforms, and the switching v-i trajectory of the power devices are discussed and compared with the conventional hard switching DC-DC converter treated here. The temperature performance of IGBT module,, efficiency, and EMI noise characteristics of this ZVS-PWM DC-DC converter using IGBTs are measured and evaluated from an experimental point of view.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.602-606
• /
• 2005

A systematic procedure of probability analysis for general distributions is developed based on the first four moments estimated from polynomial interpolation of the system response function and the Pearson system. The function approximation is based on a specially selected experimental region for accuracy and the number of function evaluations is taken equal to that of the unknown coefficient for efficiency. For this purpose, three error-minimizing conditions are proposed and corresponding canonical experimental regions are formed for popular probability. This approach is applied to study the stochastic properties of the performance functions of a MEMS structure, which has quite large fabrication errors compared to other structures. Especially, the vibratory micro-gyroscope is studied using the statistical moments and probability density function (PDF) of the performance function to be the difference between resonant frequencies corresponding to sensing and driving mode. The results show that it is very sensitive to the fabrication errors and that the types of PDF of each variable also affect the stochastic properties of the performance function although they have same the mean and variance.

• 한국항행학회논문지
• /
• 제13권5호
• /
• pp.726-735
• /
• 2009

본 논문에서는 방송 시스템에서 채널의 대역폭이 제한되는 상황에서 유효 가입자 제어를 위한 메시지 전송 오버헤드를 감소시키는 접근 제어 시스템을 제안하였다. 이를 위해서 IP 기반 멀티캐스트에 제안되었던 트리 계층 구조의 키 개정 시스템을 도입하여 가입자를 트리 구조에 직접 매핑하는 경우와 가입자를 채널 그룹별로 나누어 채널 그룹을 트리 구조에 적용하는 시스템을 고려하였다. 제안 시스템의 효율성을 평가하기 위해 기존의 시스템과 제안 시스템에 대해서 보안을 위한 주기적인 키 개정을 위한 오버헤드 전송율과 동적이면서 비주기적으로 가입자의 변동이 발생을 할 때의 오버헤드 전송율을 분석하였다. 다양한 시스템 환경에서 제안 시스템은 기존 시스템에 비해서 가입자의 변동이 발생할 경우에 수 배에서 수십 만배의 키 개정을 위한 메시지 오버헤드 전송율을 크게 감소시키는 것을 분석 평가를 통해서 확인하였다.

• 한국음향학회지
• /
• 제8권4호
• /
• pp.74-82
• /
• 1989

본 논문에서는 음성신호의 다중채널 실시간 부호화를 위하여 1차 차분신호의 불필요한 영비트를 제거하고 5개 단위로 음성 패킷을 구성해 주는 패킷 부호화에 관하여 그 실현방법 및 성능을 연구하였다. 제안된 패킷부호화 방법은 알고리즘이 매우 간단하며 수치연산보다는 주로 데이터의 조작에 의해 이루어지므로 많은 정보량의 압축은 기대하기 어려우나, 10가지의 음성 안내문에 적용한 결과 약 $40\%$정도의 정보 압축이 가능하였다. 따라서 제안된 방법을 사용하면 매우 간단하게 음성신호 저장시 메모리를 절약해줄 수 있으며 또한 전송시 전송 효율을 높여줄 수 있고, 특히 알고리즘이 간단하므로 부호화시 채널을 다중좌하기에 유리한 장점이 있다.

• 한국전산구조공학회논문집
• /
• 제19권2호
• /
• pp.213-219
• /
• 2006

위상 최적화 문제는 다양한 밀도 분포를 가지는 설계영역에서 목적함수와 요소단위의 설계 민감도의 반복적인 계산을 요구한다. 최근 제안된 2단계 축소기법은 축소 시스템을 구축하는데 매우 효과적이며 고유치 문제와 동적 문제의 해석에 정확도와 효율성을 동시에 제공한다. 본 논문에서는 구조 위상 최적화 문제에서 해석 부분과 민감도 계산 부분에 2단계 동적 축소기법을 사용한다. 축소시스템에 대한 위상 최적화 결과는 축소되지 않은 전체 시스템에 대한 최적화 결과와 비교하여도 공학적으로 요구되는 정확도 범위 내에서 2단계 축소기법이 높은 정확도와 계산 효율을 보장하는 것을 보여준다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2157-2161
• /
• 2003

In this paper, the response surface method using three-dimensional Navier-Stokes analysis to optimize the shape of a forward-curved blades centrifugal fan, is described. For numerical analysis, Reynolds-averaged Navier-Stokes equations with standard k-e turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in forward-curved blades centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Linear Upwind Differencing Scheme(LUDS) is used to approximate the convection terms in the governing equations. SIMPLEC algorithm is used as a velocity-pressure correction procedure. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. It was found that the optimization process provides reliable design of this kind of fans with reasonable computing time

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.177-180
• /
• 1999

Nowadays, one of the major technical issues in manufacturing is to create an environment to promote collaboration among diverse engineering activities. Collaborative engineering is an innovative approach integrating widely distributed engineering activities through promoting information sharing and actual collaboration. It requires close interactions among developers, suppliers and customers, and consideration of entire product life cycle from concept to disposal. A carefully-designed operating system is crucial for successful collaboration of many different activities in a Networked Virtual Manufacturing System(NVMS). High extensibility, flexibility and efficiency ale the key characteristics requested of an operating system to handle the complexity of the NVMSs. In this paper, we propose a model of the operating system for collaborative engineering using concurrent quasi-procedural method(QPM). QPM is a goal-driven data management technique for distributed and parallel computing environments. It is to be applied to the evaluation of activities to be executed, validities of input data, execution path of activities for a needed output, and expected to greatly improve the productivity of operations by preventing redundant evaluations. Collaboration among many different engineering activities in NVMSs is to be performed by the network of agents that encapsulate the capabilities of both users and their tools.

• 대한조선학회논문집
• /
• 제50권3호
• /
• pp.167-174
• /
• 2013

Model ice forming process in ice tank needs several steps of seeding, freezing, tempering. In those process, one of the most important factors to affect the accuracy of experiment is the homogeneity of the ice thickness and the temperature. This paper investigated a computational and statistical method to assess the uniformity of the model ice. In addition, the different configurations of freezing systems were considered to improve the uniformity. Qualitative assessment using streamlines from the cooling units was carried out by computational fluid dynamics (CFD) and the quantitative evaluations of the homogeneity were compared using the temperature distribution on the ice surface. In addition, multi species transport analysis is introduced to understand the circulation efficiency of cold air from the cooling units. As the results, optimized configurations were determined by adjusting the angles of vane in the cooling units.