• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.5
• /
• pp.109-124
• /
• 2021

This study tried to verify the causal relationship that SMEs' organizational culture and self-efficacy would affect job crafting and job satisfaction. Unlike previous domestic studies that have been studied for organizational culture at the organizational level and self-efficacy at the individual level, this study tried to verify the interaction between job crafting and job satisfaction using different mechanisms as antecedent factors. In order to verify the research model of this study, questionnaires of 144 small and medium-sized enterprises (SMEs) workers located in Seoul and metropolitan areas were analyzed. Factor analysis and correlation analysis were performed to verify the reliability and validity of the research model on the relationship between variables, and empirical analysis was performed using regression analysis and mediation effect analysis to verify the hypothesis. The results of the study were first, that organizational culture and self-efficacy had a positive (+) effect on job crafting. On the other hand, relationship-oriented culture and hierarchical-oriented culture, which are sub-factors of organizational culture, were found to be insignificant. Second, organizational culture and self-efficacy were found to have a positive (+) effect on job satisfaction. On the other hand, it was found that market-oriented culture and hierarchical-oriented culture, which are sub-factors of organizational culture, were not significant. Third, job crafting was found to have a positive (+) effect on job satisfaction. On the other hand, it was found that the sub-factors of job crafting, disruptive job demands and social job resources, were not significant. This means that organizational culture partially affects job crafting and job satisfaction of SMEs, and job crafting also partially affects job satisfaction. The implications of this study are first, suggesting the meaning of SME organizational culture for stable and efficient human resource management for SMEs suffering from low productivity and high turnover rate. Second, it was meaningful to understand the possibility of introducing job crafting as an effective job management plan for SMEs. Third, in the current situation where there are few cases of practical introduction of job crafting, research on understanding job crafting for SMEs and improving job satisfaction is thought to be helpful in improving the productivity of SMEs.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.925-938
• /
• 2022

Agricultural reservoirs are an important water resource nationwide and vulnerable to abnormal climate effects such as drought caused by climate change. Therefore, it is required enhanced management for appropriate operation. Although water-level tracking is necessary through continuous monitoring, it is challenging to measure and observe on-site due to practical problems. This study presents an objective comparison between multiple AI models for water-body extraction using radar images that have the advantages of wide coverage, and frequent revisit time. The proposed methods in this study used Sentinel-1 Synthetic Aperture Radar (SAR) images, and unlike common methods of water extraction based on optical images, they are suitable for long-term monitoring because they are less affected by the weather conditions. We built four AI models such as Support Vector Machine (SVM), Random Forest (RF), Artificial Neural Network (ANN), and Automated Machine Learning (AutoML) using drone images, sentinel-1 SAR and DSM data. There are total of 22 reservoirs of less than 1 million tons for the study, including small and medium-sized reservoirs with an effective storage capacity of less than 300,000 tons. 45 images from 22 reservoirs were used for model training and verification, and the results show that the AutoML model was 0.01 to 0.03 better in the water Intersection over Union (IoU) than the other three models, with Accuracy=0.92 and mIoU=0.81 in a test. As the result, AutoML performed as well as the classical machine learning methods and it is expected that the applicability of the water-body extraction technique by AutoML to monitor reservoirs automatically.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.319-327
• /
• 2010

A nuclear plant ESF ACS simulator was designed, built, and verified to perform experiment related to ESF ACS of nuclear power plants. The dimension of 3D CAD model was based on drawings of the main control room(MCR) of Yonggwang units 5 and 6. The CFD analysis was performed based on the measurement of the actual flow rate of ESF ACS. The air flowing in ACS was assumed to have $30^{\circ}C$ and uniform flow. The flow rate across the HEPA filter was estimated to be 1.83 m/s based on the MCR ACS flow rate of 12,986 CFM and HEPA filter area of 9 filters having effective area of $610{\times}610mm^2$ each. When MCR ACS was modeled, air flow blocking filter frames were considered for better simulation of the real ACS. In CFD analysis, the air flow rate in the lower part of the active carbon adsorber was simulated separately at higher than 7 m/s to reflect the measured value of 8 m/s. Through the CFD analyses of the ACSes of fuel building emergency ventilation system, emergency core cooling system equipment room ventilation cleanup system, it was confirmed that all three EFS ACSes can be simulated by controlling the flow rate of the simulator. After the CFD analysis, the simulator was built in nuclear grade and its reliability was verified through air flow distribution tests before it was used in main tests. The verification result showed that distribution of the internal flow was uniform except near the filter frames when medium filter was installed. The simulator was used in the tests to confirm the revised contents in Reg. Guide 1.52 (Rev. 3).

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.5
• /
• pp.605-611
• /
• 2015

A synthetic strain of ducks (Anas platyrhynchos) was developed by introducing genes for long duration of fertility to be used as mother of mule ducklings and a seven-generation selection experiment was conducted to increase the number of fertile eggs after a single artificial insemination (AI) with pooled Muscovy semen. Reciprocal crossbreeding between Brown Tsaiya LRI-2 (with long duration of fertility) and Pekin L-201 (with white plumage mule ducklings) ducks produced the G0. Then G1 were intercrossed to produce G2 and so on for the following generations. Each female duck was inseminated 3 times, at 26, 29, and 32 weeks of age. The eggs were collected for 14 days from day 2 after AI. Individual data regarding the number of incubated eggs (Ie), the number of fertile eggs at candling at day 7 of incubation (F), the total number of dead embryos (M), the maximum duration of fertility (Dm) and the number of hatched mule ducklings (H) with plumage colour were recorded. The selection criterion was the breeding values of the best linear unbiased prediction animal model for F. The results show high percentage of exhibited heterosis in G2 for traits to improve (19.1% for F and 12.9% for H); F with a value of 5.92 (vs 3.74 in the Pekin L-201) was improved in the G2. Heritabilities were found to be low for Ie ($h^2=0.07{\pm}0.03$) and M ($h^2=0.07{\pm}0.01$), moderately low for Dm ($h^2=0.13{\pm}0.02$), of medium values for H ($h^2=0.20{\pm}0.03$) and F ($h^2=0.23{\pm}0.03$). High and favourable genetic correlations existed between F and Dm ($r_g=0.93$), between F and H ($r_g=0.97$) and between Dm and H ($r_g=0.90$). The selection experiment showed a positive trend for phenotypic values of F (6.38 fertile eggs in G10 of synthetic strain vs 5.59 eggs in G4, and 3.74 eggs in Pekin L-201), with correlated response for increasing H (5.73 ducklings in G10 vs 4.86 in G4, and 3.09 ducklings in Pekin L-201) and maximum duration of the fertile period without increasing the embryo mortality rate. The average predicted genetic response for F was 40% of genetic standard deviation per generation of selection. The mule ducklings' feather colour also was improved. It was concluded that this study provided results for a better understanding of the genetics of the duration of fertility traits in the common female duck bred for mule and that the selection of a synthetic strain was effective method of improvement.

• Journal of dental hygiene science
• /
• v.4 no.3
• /
• pp.91-95
• /
• 2004

This study aims to analyze realities of oral health and related factors, and establish Structural Equation Modeling. The subjects of study were 9,340 elderly over age 65 who took the health examination(the first) for the local insured which National Health Insurance Corporation carried out in the survey area mentioned below from January 2002 to December 2002. The areas surveyed were 4 big cities including Seongbuk-ku, Seoul, 5 medium cities including Wonjusi, Gangwon-do, and 5 Counties including Yeong deok County, Kyeongbuk. Considering location and the scale of population, firstly, big unit areas(metropolitan city, province) were selected according to convenience, secondly, low unit areas(city, county, district) were selected randomly. The subjects were the elderly who took all tests including an oral examination and filled in the questionnaire. Major results from analysis are as follows: 1. Review of Composition Conception Validity As a result of analyzing composition conception validity of SEM including posture test, urine test, blood test, habits of eating, drinking and smoking, oral symptoms, and oral health status, using fit index such as GFI, CFI, TLI, and RMSEA, all were within fit range and composition conception validity was recognized. 2. As a result of analyzing SEM to find the relationship between each factor and oral health status, it was confirmed that all factors except urine test affected oral health status and the synthetic SEM to explain it could be established. In result, we could verify that the elderly of rural areas who had lesser experience of visiting a clinic and oral prophylaxis had a higher rate of caries, missing teeth, and denture need, and drinking and smoking negatively affected the rate of caries, periodontal, and missing teeth. Also, periodontal diseases were observed from 43.2% of the total elderly and much from the lower age. Most of oral disease can be prevented by right oral health behavior. Therefore through oral health professionals from each district public health center of the nation, oral health education for the elderly about right eating habits and oral health care should be carried out systematically and policy change to increase access to dental service is required lest that visiting a dental clinic should be impossible or oral health behaviors such as oral prophylaxis and denture wearing should be neglected by economic, geographical barriers. Also, to establish SEM to explain the relationship between oral health status and systemic health, more accurate test methods and effective index development should be preceded. Because items developed by National Health Insurance Corporation applied to this study without alteration, structuring a model had the uppermost limit. Continual study seems to be needed.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.67-76
• /
• 2022

The furniture industry has a high possibility to create value-added and a high potential to create new occupations due to the characteristics of the industry, which mainly consists of small and medium-sized enterprises (SMEs). However, the used furniture, which has sufficient reuse value, is also crushed and used as solid refuse fuel (SRF) recently. Besides, the number of waste treatment companies continues to decrease, and it occurs congestion of wood waste. As a way to solve the issue, a business model development of remanufacturing used furniture can be suggested as an alternative due to its high circular economic efficiency. Remanufacturing business including furniture industry creates positive effects in various aspects such as economic, environmental and job creation. In other words, remanufacturing is an effective recycling way to reduce input resources and energy in the production process. The results of economic analysis show that the expected annual revenue from the single worker furniture remanufacturing site was 104 million won which is 3.11 times more than the average income of a single-worker household in Korea and its B/C ratio was estimated about 30 which means high business feasibility. Revenue through furniture remanufacturing also showed 320 times higher than that of SRF production from the perspective of weight. In addition, it is shown that the GHGs reduction from the furniture remanufacturing is 2.2 ton CO₂-eq. per year, which is similar to the amount of GHGs absorption effect of 937 pine trees or 622 Korean oak trees annually. Thus the results of this study demonstrate that it is important to adopt an appropriate recycling method considering the economic and environmental effects at the end-of-life stage.

• Journal of Venture Innovation
• /
• v.3 no.2
• /
• pp.41-76
• /
• 2020

This study confirmed factors affecting smart factory technology acceptance through empirical analysis. It is a study on what factors have an important influence on the introduction of the smart factory, which is the core field of the 4th industry. I believe that there is academic and practical significance in the context of insufficient research on technology acceptance in the field of smart factories. This research was conducted based on the Unified Theory of Acceptance and Use of Technology (UTAUT), whose explanatory power has been proven in the study of the acceptance factors of information technology. In addition to the four independent variables of the UTAUT : Performance Expectancy, Effort Expectancy, Social Influence, and Facilitating Conditions, Government Assistance Expectancy, which is expected to be an important factor due to the characteristics of the smart factory, was added to the independent variable. And, in order to confirm the technical factors of smart factory technology acceptance, the Task Technology Fit(TTF) was added to empirically analyze the effect on Behavioral Intention. Trust is added as a parameter because the degree of trust in new technologies is expected to have a very important effect on the acceptance of technologies. Finally, empirical verification was conducted by adding Innovation Resistance to a research variable that plays a role as a moderator, based on previous studies that innovation by new information technology can inevitably cause refusal to users. For empirical analysis, an online questionnaire of random sampling method was conducted for incumbents of domestic small and medium-sized enterprises, and 309 copies of effective responses were used for empirical analysis. Amos 23.0 and Process macro 3.4 were used for statistical analysis. For accurate statistical analysis, the validity of Research Model and Measurement Variable were secured through confirmatory factor analysis. Accurate empirical analysis was conducted through appropriate statistical procedures and correct interpretation for causality verification, mediating effect verification, and moderating effect verification. Performance Expectancy, Social Influence, Government Assistance Expectancy, and Task Technology Fit had a positive (+) effect on smart factory technology acceptance. The magnitude of influence was found in the order of Government Assistance Expectancy(β=.487) > Task Technology Fit(β=.218) > Performance Expectancy(β=.205) > Social Influence(β=.204). Both the Task Characteristics and the Technology Characteristics were confirmed to have a positive (+) effect on Task Technology Fit. It was found that Task Characteristics(β=.559) had a greater effect on Task Technology Fit than Technology Characteristics(β=.328). In the mediating effect verification on Trust, a statistically significant mediating role of Trust was not identified between each of the six independent variables and the intention to introduce a smart factory. Through the verification of the moderating effect of Innovation Resistance, it was found that Innovation Resistance plays a positive (+) moderating role between Government Assistance Expectancy, and technology acceptance intention. In other words, the greater the Innovation Resistance, the greater the influence of the Government Assistance Expectancy on the intention to adopt the smart factory than the case where there is less Innovation Resistance. Based on this, academic and practical implications were presented.

• Parasites, Hosts and Diseases
• /
• v.29 no.3
• /
• pp.235-244
• /
• 1991

An epidemiological study and mass treatments of Enterobius vermicularis infection among children near Wonju area of Kangwon province were carried out. The children were divided into 4 groups according to their residing localities; children in the mountainous area, rural area, urban area and in orphanage. They were examined by adhesive cellotape anal swab technique, and egg positive rates were obtained. The rates of egg reduction and re-infection rates after repeated mass treatments were also observed. The results obtained were as follows: 1. The overall egg Positive rate of E. vermicularis in the first screening was 19.9% (251 out of 1, 262 examinees; 19.7% in males and 20.1% in females). The positive rates were 13.0% in the mountainous area, 11 9% in the rural area, 15.1% in the urban (medium-sized) area and 61.9% in orphanages. 2. The highest positive rates were observed in the kindergarten children, and 1st and 2nd grade children of primary schools (26.2~32.2%), and the lowest rate (13.6%) in 6-year grade children of primary schools. 3. Cumulative detection rates from 3 repeated anal swabs at 4~5 days interval were higher (70.8%) than those from single anal swabs (50.0~59.2%). 4. Out of the examinees who showed the highest cumulative positive rate (70.8%), about 39.2% were consecutively positive in 3 anal swabs. Among different groups of children, the higher the total egg detection rates (87.5%), the higher the consecutive positive rates (71.9%) . 5. A total of 2, 609 (male : female=1 : 12.4) worms were collected from 17 egg-positive cases treated with anthelinintics. The mean number of worms per child was 153 (range: 4-824) . 6. The egg-positive cases in several studied groups (180 children) were treated with anthelmintics 6 times at 3-week intervals. In this case, the overall positive rate was decreased from 54.8% to 2.2% at 15 weeks after the treatments, but no complete negative conversion was experienced. However, in a group of children (154 children) including egg Positive and negative cases who were both treated with anthelmintics at 3-week interval, a complete egg-negative conversion was observed in the 9th week after treatments. 7. The egg-detection rate in the brothers or sisters of egg Positive children was 70.0% (28 out of 40 examined), and the egg-positive rate according to the family unit was 69.7%. In summarizing the above results, it is concluded that Enterobius vermicularis infection is still highly prevalent among children in Korea, and that repeated mass treatments of more than 3 times will be effective for control of this infection.