• 한국토양환경학회지
• /
• 제2권2호
• /
• pp.95-103
• /
• 1997

유기화합물로 오염된 지반을 정화하는 방법 가운데 화학약액을 주입하는 흙세척 방법은 매우 효과적인 것으로 알려져 있다. 이를 실험실에서 재현하는 경우에는 일반적으로 연성벽체의 주상실험을 실시하게 된다. 이때 유기화합물로 오염된 시편을 화학약액으로 세척하는 과정 중에서 일부의 유기화합물은 연성벽체를 통하여 확산되고, 확산된 양은 화학약액에 의한 세척효율 산정시 반드시 고려하여야 할 것으로 나타났다. 연성벽막을 통한 확산량을 조사하고자 다섯가지의 유기화합물(페놀, 아닐린, 나이트로벤젠, 퀴놀린, 및 2나프톨)을 이용하여 breakthrough 시험을 실시하였다. 나이트로벤젠은 75% 이상이 벽막을 통하여 확산되었다. 나머지의 유기화합물은 25%이하의 확산량을 보였다. 실험중 생분해 효과는 관찰되지 않았다.

• 한국수산과학회지
• /
• 제29권6호
• /
• pp.843-848
• /
• 1996

As the first step of studies related to production of chitooligosaccharides by physical methods, chitosan solution were sonicated with 20 kHz and various treatment effects were examined to present fundamental data of sonicated chitosan solution. Intrinsic viscosity of chitosan solution sharply decreased from 3.76 dl/g to 2.90 dl/g until 5 minutes of sonication and then slowly decreased. With low volume of chitosan solution, sonication was very effective and temperature of chitosan solution slightly affected the efficiency of sonication. In case of changing the solvent, no significant differences were observed on the effect of sonication, however, acetate buffer had highest sonication effect among various solvents. The sonication effect was increased as the increasement of the value of pH, on the contrary, ionic strength and type of counterions showed no effect on sonication. With these results, we assumed that optimal sonication treatment would be as follows, solution volume was $10\~20\;ml$, temperature range was $20\~30^{\circ}C$, pH value of solution was 4.5 and type of solvent was acetate buffer.

• 환경위생공학
• /
• 제17권3호
• /
• pp.21-30
• /
• 2002

This study was Performed to evaluate the effective solidification of Cd sludge using cement and power plant fly ash as cement admixture, to identify the leaching characteristics of the heavy metal Cd sludge solidified, and to develope proper KLT(Korean Leaching Test) of hazardous waste. KLT was compared with EPT(Extraction Procedure Toxicity) and TCLP(Toxicity Characteristics Leaching Procedure). Fly ash contents ranged from 0% to 30% of cement weight. The experimental results showed that the optimum amount of fly ash replaced was 10% to 15% and KLT was less appropriate than EPA and TCLP. Also the purpose of the study was to suggest the modification factors on the leaching test currently used, based on the above mentioned aspects. The effects of pH, leaching time, leaching for agitating intensity, and leaching solvent were investigated. As the result of test, the leaching potential was relatively high when the pH and agitation intensity of leaching solution were 5 and 150rpm, respectively. Leaching time of six hours was found to be sufficient and the use of acetic acid as a leaching solvent is more useful in landfill site particularly.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.172-182
• /
• 2014

Extraction is a necessary element in the bioconversion of lignocellulosics to fuels and chemicals. Although various forms of chemical pretreatment of cellulosic materials have been proposed, their effectiveness varies depending on the treatment conditions and substrate. In this study, mixed hardwood (MH) and loblolly pine (LP) were pretreated with dilute acid in a 100 mL accelerated solvent extraction (ASE) at the predetermined optimal conditions: temperature: $170^{\circ}C$, acid concentration: 0.5% (w/v), and reaction time: 2~64 min. This method was highly effective for extracting the hemicellulose fraction. Total xmg (defined as the sum of xylose, mannose, and galactose) can be extracted from milled MH and LP through pressurized dilute acid treatment in maximum yields of 12.6 g/L and 15.3 g/L, respectively, representing 60.5% and 70.4% of the maximum possible yields, respectively. The crystallinity index increased upon pretreatment, reflecting the removal of the amorphous portion of biomass. The crystalline structure of the cellulose in the biomass, however, was not changed by the ASE extraction process.

• The Korean Journal of Ceramics
• /
• 제3권3호
• /
• pp.187-190
• /
• 1997

The aluminum-magnesium (Al-Mg) aklloys have been proved to be an effective solvent for synthesis of cubic-phase boron nitride (cBN) from hexagonal-phase boron nitride (hBN) at the conditions of high pressures and high temperatures (HP/HT). Various kinds of hBN powders having different crystallinity have been tested for cBN synthesis with Al-Mg solvents. The conversion ratio from hBN to cBN and the shape of synthesized cBN crystals appeared to be affected strongly by chemical composition and added amount of Al-Mg solvents as well as crystallinity of BN powders. As the magnesium content increased in the Al-Mg solvents, the conversion ratio increased and the size of cBN crystals became larger. The crystal facets developed well in the specimens with solvents having high Mg content. It was observed that a hBNlongrightarrowcBN transformation occurred more easily in the specimens having well crystallized hBN powders. Amorphous BN having much $B_2O_3$ impurity exhibited a low threshold temperature for transformation to cBN, which was attributed to crystallization of amorphous BN to well crystallized hBN prior to transformation into cBN with help of $B_2O_3$.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.768-778
• /
• 2011

Calixpyrroles and related macrocycles are non-planer synthetic anion receptors that have attracted considerable attentions in recent years. Although the synthesis of calix[4]pyrrole (known as meso-octamethylporphyrinogen) was reported more than 100 years ago, the anion binding properties were first discovered in 1996. The simple calix[4]pyrroles can be synthesized in single step in high yield by condensation of pyrrole with acetone. The compounds showed preferential binding for halide anions including fluoride, phosphate, carboxylate, and chloride in organic media. Efforts to improve the anion affinity of calix[4]pyrrole and to enhance its selectivity have led to the synthesis of a variety of new calixpyrrole derivatives. Among the various modifications, introduction of straps on one side of the calix[4]pyrroles are the most effective. Incorporation of aromatic rings other than pyrroles also exhibited interesting binding behaviour. Introduction of signalling units as part of the strapping element enable to detect the anions on chromogenic or fluorogenic fashion. Finding of the anion transport properties across the membrane and cytotoxic effects of the calix[4]pyrroles open new window for calixpyrrole-related research. The polymer-incorporated systems have also been employed as anion complexants in solvent-solvent extraction. These old, yet easy-to-make macrocycles have well advanced more recently with the discovery of the ion-pair complexation properties. In this review, the synthetic developments and anion binding properties of calixpyrroles for the last decades will be discussed and will cover the advances in calixpyrrole chemistry.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.441-444
• /
• 2009

The formation and structure of self-assembled monolayers (SAMs) by the adsorption of acetyl-protected octylthioacetate (OTA) on Au(111) in a catalytic tetrabutylammonium cyanide (TBACN) solution were examined by means of scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV). Molecular-scale STM imaging revealed that OTA molecules on Au(111) in a pure solvent form disordered SAMs, whereas they form well-ordered SAMs showing a c(4 × 2) structure in a catalytic TBACN solution. XPS and CV measurements also revealed that OTA SAMs on Au(111) formed in a TBACN solution have a stronger chemisorbed peak in the S 2p region at 162 eV and a higher blocking effect compared to OTA SAMs formed in a pure solvent. In this study, we clearly demonstrate that TBACN can be used as an effective deprotecting reagent for obtaining well-ordered SAMs of thioacetyl-protected molecules on gold.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.378-384
• /
• 2010

Regenerated cellulose was prepared from Buckeye wood pulp V60 via dissolution in N-methylmorpholin N-oxide (NMMO) solvent system. The effect of antioxidants such as, n-propylgallate (PG), tris(nonylphenyl) phosphite (TRIS), ethylenediamine tetraacetic acid disodium salt (EDTA), and magnesium sulfate on the properties of regenerated cellulose was studied using X-ray diffraction, copper index calculation, and viscometry. Only addition of more than 0.01% of PG into NMMO solvent was effective to avoid the reduction of the degree of polymerization(DP) of regenerated cellulose during dissolution at $110^{\circ}C$. However, the early stage(within 0.5h of dissolution process) degradation of cellulose was not prevented eventhough up to 0.5% PG was appled to hot NMMO system. In addition, to recover the expensive NMMO after cellulose regenerating process, the washing filtrate was studied using simple techniques, such as refractive index, pH, and conductivity measurements. Through conductivity measurement result, 4-time of washing was enough to remove the NMMO completely from regenerated cellulose.

• 자원리싸이클링
• /
• 제20권2호
• /
• pp.60-66
• /
• 2011

염화루테늄 용액에서 루테늄의 분리 및 회수를 위한 기초 연구로 TBP 및 Cyanex923을 이용하여 루테늄의 용매추출 거동을 조사하였다. 루테늄의 추출율에 영향을 미칠 수 있는 수용액상의 염산농도 및 염소이온 농도, 유기상의 추출제 농도, 온도 등에 대해서 고찰하였고, 유기상으로 추출원 루테늄의 탈거거동에 대해서도 조사하였다. 또한 백금, 비스무스, 납, 구리, 철, 주석 등과의 혼합용액에서 염산농도에 따라 각 성분들의 추출거동을 조사하였다. 실험결과 루테늄의 추출을 위해서는 Cyanex923이 효과적이었다. 그러나 TBP를 사용할 경우 루테늄의 추출율은 낮으나 백금, 비스무스, 주석 등의 불순물을 제거하는 데는 효과적이었다.

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.41-46
• /
• 2017

This study aims to select suitable co-solvents and to obtain optimal process conditions in order to improve process efficiency and productivity through experimental results obtained under various experimental conditions for the etching and rinsing process using liquid carbon dioxide and supercritical carbon dioxide. Acetone was confirmed to be effective through basic experiments and used as the etching solution for MEMS-wafer etching in this study. In the case of using liquid carbon dioxide as the solvent and acetone as the etching solution, these two components were not mixed well and showed a phase separation. Liquid carbon dioxide in the lower layer interfered with contact between acetone and Mems-wafer during etching, and the results after rinsing and drying were not good. Based on the results obtained under various experimental conditions, the optimum process for treating MEMS-wafer using supercritical CO2 as the solvent, acetone as the etching solution, and methanol as the rinsing solution was set up, and MEMS-wafer without stiction can be obtained by continuous etching, rinsing and drying process. In addition, the amount of the etching solution (acetone) and the cleaning liquid (methanol) compared to the initial experimental values can be greatly reduced through optimization of process conditions.