• 한국환경과학회지
• /
• 제7권5호
• /
• pp.669-677
• /
• 1998

A porous $\alpha$-alumina tube of 2.5 mm O.D. and 1.9 mm I.D. was used as the support of an inorganic membrane. Macropores of the tube, about 150 nm in size, were plugged with silica formed by thermal decomposition of tetraethylorthosilicate at $600^{\circ}C$. The forced cross-flow CVD method that reactant was evacuated through the porous wall of the support was very effective in plugging macropores. The H$_2$ permeance of the prepared membrane was of the order of $10^{-8}/ molㆍs^{-1}/ㆍm^{-2}/. Pa{-1}$/, while the $N_2$ permeance was below $10^{-11}/ molㆍs^{-1}/ㆍm^{-2}/ㆍPa^{-1}$/ at $600^{\circ}C$. This was comparable to that of silica-modified Vycor glass whose size was 4 nm.

• Membrane and Water Treatment
• /
• 제7권3호
• /
• pp.175-191
• /
• 2016

In this work, oil-in-water emulsions (O/W) were prepared successfully by membrane emulsification with $0.5{\mu}m$ pore size membrane. Sunflower oil was emulsified in aqueous Tween80 solution with a simple crossflow apparatus equipped with ceramic tube membrane. In order to increase the shear-stress near the membrane wall, a helical-shaped reducer was installed within the lumen side of the tube membrane. This method allows the reduction of continuous phase flow and the increase of dispersed phase flux, for cost effective production. Results were compared with the conventional cross-flow membrane emulsification method. Monodisperse O/W emulsions were obtained using tubular membrane with droplet size in the range $3.3-4.6{\mu}m$ corresponded to the membrane pore diameter of $0.5{\mu}m$. The final aim of this study is to obtain O/W emulsions by simple membrane emulsification method without reducer and compare the results obtained by membrane equipped with helix shaped reducer. To indicate the results statistical methods, $3^p$ type full factorial experimental designs were evaluated, using software called STATISTICA. For prediction of the flux, droplet size and PDI a mathematical model was set up which can describe well the dependent variables in the studied range, namely the run of the flux and the mean droplet diameter and the effects of operating parameters. The results suggested that polynomial model is adequate for representation of selected responses.

• 상하수도학회지
• /
• 제30권2호
• /
• pp.131-137
• /
• 2016

The development of alternative water resources has emerged as an effective method for solving drought of water resources due to extreme weather and increase in water consumption. Recently, in Korea, there has been active research on reverse osmosis desalination technology, wastewater reuse using forward osmosis membranes, and the forward osmosis(FO)-reverse osmosis(RO) hybrid process combining these two technologies. In this study, the basic performance of FO membranes manufactured by three domestic and international manufactures such as Microfilter Co., Ltd., Toray Chemical Korea Inc., and Hydration Technologies Inc., were investigated for wastewater reuse. In addition, as an experiment to select feed solution, the selected membranes were operated 48 consecutive hours using three secondary effluents pretreated by the UF membrane with a pore size of $0.1{\mu}m$ and auto strainer with pore sizes of $1{\mu}m$ and $100{\mu}m$ as feed solution. Although there was not much difference in the operating performance. Thus, the treated water using the $100{\mu}m$ auto strainer was selected as feed solution applied to the assessment.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.7.1-7.1
• /
• 2011

Nanoporous templates have been widely used for the development of new functional nanostructured materials suitable for electronics, optics, magnetism, and energy storage materials. We have prepared nanoporous templates by using thin films of mixtures of polystyrene-block-poly (methyl methacrylate) (PS-b-PMMA) and PMMA homopolymers. These templates have cylindrical nanoholes spanning the entire thickness of the film. Some applications of nanoporous templates are introduced: a) anti-reflective coating, b) the preparation of conducting polymer nanowires of poly (pyrrole), poly (3,4-ethylenedioxy-thiopene) onto a glass coated with indium-tin-oxide, and c) the separation membranes for biomaterials. We found that when the pore fraction of nanoholes in the film was ~0.68, almost zero reflectance at a specific wavelength, which can be changed with film thickness, was achieved at visible wavelengths Furthermore, ultra high density array of conducting nanowires was successfully prepared onto various substrates including flexible polymer. Due to highly alignment of polymer chain along the nanowire direction, the conductivity was much increased. Furthermore, these nanoporous films were found to be very effective for the separation of human Rhinovirus type 14 (HRV 14), major pathogen of a common cold in humans, from the buffer solution. We also found that when the pore size was effectively controlled down to 6 nm, a single file diffusion was observed.

• 한국세라믹학회지
• /
• 제25권1호
• /
• pp.59-65
• /
• 1988

To develop porous glass membranes used for a effective membrane-separation process, porous glasses and glass membranes were prepared from the sodium borosilicate parent glass by the phaseseparation technique and effects of heat-treatment and leaching conditions on their characteristics were investigated. The crack-free glass membranes could be fabricated from the 9.4 Na2-O-30.7 B2O3-59.2 SiO2-0.7 Al2O3(wt%) parent glass by heat-treatment at the lower temperature(550-570$^{\circ}C$) and for longer than 45 hrs for the phase separation, followed by leaching with 3N-HCl＋60% ethylene glycol solution at 90$^{\circ}C$ over 25 hrs. Porous glasses prepared in this work showed large specific surface areas(400㎡/g) and narrow pore size distribution with the mean pore radius of 14${\AA}$ enough for the application as reverse osmosis membranes. The salt-rejection efficiency and product-flux of the glass membranes heat-treated at 570$^{\circ}C$ for 80 hrs were found to be 51.8% and 270cc/㎡. hr, respectively. This result suggests that the porous glass membranes fabricated in this study could be applied for the reverse osmosis process.

• 한국전기전자재료학회논문지
• /
• 제28권4호
• /
• pp.249-251
• /
• 2015

In this study, the application of biosensor having a large surface area for more effective and AAO (anomic aluminium oxide) template in order to gain concentration and voltage of anodizing process morphology changes to the control of experiments were conducted. The biosensor surface may increase the response characteristics by having a large surface area. So the entrance to a little more efficient wide depth sensing experiment was carried out to obtain a structure body with a branch shape with a large surface area with increasing. Experimental results from the FE-SEM observation was obtained template morphology. As a result, depending on the anodizing time, the depth of the layer of aluminum oxide was found that it was confirmed that the deepening of the pore size changes according to anodizing condition. And measuring the detection performance according to the conditions in the electrolyte and the reaction because of blood using a biosensor measuring sensing property according to the depth of the pore depth is considered that does not have a significant impact.

• Membrane and Water Treatment
• /
• 제13권3호
• /
• pp.129-137
• /
• 2022

In this study, the removal of Ciprofloxacin (CPX) from aqueous solutions was investigated by a new activated carbon adsorbent prepared from orange peel (ACOP) with chemical activation using ZnCl₂. The physicochemical properties of orange peel activated carbon were characterized by proximate and ultimate analysis, scanning electron microscopy, BET surface area determination and Fourier transformation infrared spectroscopic studies. According to Brunauer-Emmett-Teller isotherm and non-local-density functional theory, the cumulative surface area, pore volume and pore size of ACOP were determined as 1193 m² g^-1, 0.83 cc g^-1 and 12.7 Å, respectively. The effects of contact time, pH, temperature and ACOP dose on the batch adsorption of CPX were studied. Adsorption equilibrium data of CPX with ACOP were found to be compatible with both the Langmuir and Freundlich isotherms. CPX adsorption capacity of ACOP was calculated as 181.8 mg g^-1 using Langmuir isotherm. The CPX adsorption kinetics were found to be harmonious with the pseudo-second-order kinetic model. Conclusively, ACOP can be assessable as an effective adsorbent for the removal of ciprofloxacin (CPX) from aqueous solutions.

• 청정기술
• /
• 제26권3호
• /
• pp.196-203
• /
• 2020

본 연구에서는 Cu/hexaaluminate를 공침법으로 제조한 후, 바인더를 첨가하여 펠렛 형태로 성형하였다. 니켈 및 루테늄 조촉매의 첨가가 Cu/hexaaluminate pellet 촉매의 특성과 ADN계 액체 단일 추진제의 분해 반응에 미치는 영향을 고찰하는데 초점을 두었다. Cu/hexaaluminate pellet 촉매는 미세 기공은 거의 없으며 메조 기공이 발달한 촉매이다. Cu/hexaaluminate pellet 촉매에 루테늄을 조촉매로 첨가하면 기공의 부피와 기공의 크기는 큰 폭으로 증가하였다. ADN 기반 액체 단일 추진제의 열분해 반응에서 분해 개시 온도는 170.2 ℃이다. Cu/hexaaluminate pellet 촉매를 사용한 경우, 분해 개시 온도는 93.5 ℃로 크게 감소한 것을 확인하였다. 루테늄 1% 및 3%를 조촉매로 첨가했을 때, ADN 기반 액체 단일 추진제 분해 개시 온도가 각각 91.0 ℃와 83.3 ℃로 낮아졌다. 즉, 루테늄 조촉매가 ADN 기반 액체 단일 추진제의 분해 개시 온도를 낮추는데 효과가 있다는 것을 의미한다. 이는 루테늄 금속이 ADN 기반 액체 단일 추진제 분해 반응에 활성이 뛰어나면서, 동시에 기공 부피와 기공의 크기를 증가시키는데 기여하였기 때문이다. Cu/hexaaluminate pellet 촉매의 내열성에 루테늄이 미치는 영향을 확인하기 위하여 1200 ℃에서의 열처리와 ADN 기반 액체 단일 추진제 분해 실험을 반복적으로 수행한 결과, 루테늄의 첨가 비율이 증가함에 따라 내열성이 증가하는 것을 확인할 수 있었다.

• 한국물환경학회지
• /
• 제34권1호
• /
• pp.84-95
• /
• 2018

The community structure of benthic macroinvertebrates in the fine sediments of freshwater was analyzed according to various sampling tools and methods. The sediment core with the inner diameter of 7.5 cm was more effective in cost and labor in comparison to that of ${\Phi}5cm$ or ${\Phi}10cm$. The number of species increased with the increase in sample size (replicates). When it was collected five times with the ${\Phi}7.5cm$ sediment core, Shannon-Weaver's diversity and McNaughton's dominance of the sample reached about the 80 % level of the community estimates. Most species appeared in the sediment layer of 0-4 cm, and there were no newly recruited species below the depth of 4 cm. Individual abundance of benthic macroinvertebrates decreased exponentially along with the increase in sediment depth. Compared with the individual abundance of the 0-15 cm sediment layer, the abundance was 60 % in the 0-2 cm layer, 25 % in the 2-4 cm layer, 10 % in the 4-6 cm layer and 95 % in the 0-6 cm layer. Compared with organisms collected with the sieve of 0.2 mm pore, the number of species and the individual abundance sifted through the sieve with pore of 1 mm were 36 % and 88 %, and those with pore of 0.5 mm were 5 % and 55 %, respectively.

• 한국연초학회지
• /
• 제30권1호
• /
• pp.8-13
• /
• 2008

Several activated carbon in different specific surface area was prepared by steam and chemical activation of coconut shell. Products were characterized by BET ($N_2$) at 77K, and probed to be highly specific surface area of $1580m^2/g$ and pore volume that had increased with activating conditions. And also we have analyzed the adsorption efficiency of vapor phase components in cigarette mainstream smoke in order to evaluate the relationship between thesmoke components and the physicochemical properties of activated carbons. As a result of this study, the delivery of mainstream smoke was directly affected by the specific surface area and the pore size of activated carbon. The activated carbon prepared by steam activation exhibited better adsorption efficiency on the vapor phase components in mainstream smoke compared with activated carbon prepared by $ZnCl_2$, due to the higher micro-pore area of 66%. But the adsorption efficiency of semi-volatile matters such as phenolic components in a main stream smoke by the activated mesoporous carbon prepared by $ZnCl_2$ is more effective. From the these results, we can conclude that specific surface area by the micropore area increased the adsorption efficiency of activated carbon on vapour phase components, but semi-volatiles or particulate matter was affected by the ratio of mesopore area in total specific surface area.